13C NMR spectroscopy

13C NMR spectroscopy measurement for samples that can be dissolved in typical deuterated solvents. Measurements are performed with Bruker 400 MHz instrument.
215296 €
Buy

1H NMR spectroscopy

1H NMR spectroscopic measurement for samples that can be dissolved in typical deuterated solvents. Measurements are performed with Bruker 400 MHz instrument.
125197 €
Buy

2-point bending resistance of paper and board

ISO 2493 or DIN 53121
This test determines the 2-point bending resistance of paper and board by using a Taber-type tester. The bending resistance at 15° or 7.5° can be determined and expressed in terms of bending moment and parameters set by the test machine.
93193 €
Buy

2D NMR experiments

2D NMR spectroscopic measurements for samples that can be dissolved in typical deuterated solvents. Most typical experiments: COSY, TOCSY, ROESY, NOESY, HMBC, HSQC.

Abrasion resistance of textiles – Martindale method

EN ISO 12947-2
Determines the specimen abrasion breakdown by inspection at fixed intervals and is applicable on all uncoated textile fabrics.
50153 €
Ask more

Absorbency drop test for textiles

TEGEWA
This test is used to determine the water absorbency of various textile and fabric materials. A drop of water is placed on the sample and the time it takes for the drop to fully absorb to the material is measured and the result is given as seconds (s).
50153 €
Ask more

Acid insoluble ash content of paper or board

ISO 776
With this test the quantity of acid-insoluble ash from paper, board or pulp samples.
129229 €
Buy

AFM surface imaging

Imaging of the sample with atomic force microscope (AFM). In typical measurement, topological images are provided from several locations.
162354 €
Buy

Not finding what you are looking for?

We are continuously listing new products. Don't hesitate to contact us!

AFM surface roughness measurement

Measuring the surface roughness value (RMS value) of the sample using atomic force microscopy (AFM). Includes also a 2D image, 3D image and raw data.
425588 €
Buy

Air permeance of paper or board

Bendtsen, Gurley or Schopper ISO 5636-3, ISO 5636-5 or ISO 5636-1
Air permeance is an important property for some paper grades, such as paper bags that are filled industrially. Measulabs offers air permeance testing with the Bendtsen or Gurley methods: Bendtsen method (ISO 5636-3) - For papers with permeance of 0.35 µm/(Pa*s) to 15 µm/(Pa*s).
93193 €
Buy

Air permeance of textiles

EN ISO 9237
Measures permeability of fabrics to air and is applicable to most types of fabrics, including industrial fabrics for technical purposes, nonwovens and made-up textile articles that are permeable to air. The result will be given in l / m2 / s.
60140 €
Buy

Alkali reserve of paper, board or pulp

PN-ISO 10716:2009
This test is used to determine the alkali reserve of papers and boards, especially those that contain alkaline pigments or other alkaline materials.
114214 €
Buy

Amino acid identification from water

Determination of amino acids from waste water. The analysis includes the determination of the following amino acids: • Alanine • Arginine • Asparagine • Aspartate • Citrulline • Cystine/Cysteine* • Glutamate • Glutamine • Glycine • Histidine • Hydroxyproline • Isoleucine • Leucine • Lysine • Methionine • Ornithine • Phenylalanine • Proline • Serine • Taurine • Threonine • Tryptophane • Tyrosine • Valine.
295390 €
Buy

Ammonium and ammonium nitrogen from water sample

CFA-method based on auto analyzer Bran-Luebbe Method G-171- 96.
Determination of ammonium and ammonium nitrogen from water sample with Bran-Lubbe method. CFA-method is based on auto analyzer Bran-Luebbe Method G-171- 96.
27125 €
Ask more

Antibacterial activity of textile fabrics, absorption method

ISO 20743
Antibacterial activity test that can be used for any kind of textile products, including nonwovens. The method is also applicable for textiles that have been treated with antibacterial agents.
286423 €
Buy

Antibacterial activity of textile fabrics, Agar method

ISO 20645
Determination of antibacterial activity of textiles and fabrics with Agar method. This method is applicable to textiles that have not been treated with antibacterial substances that react with Agar.
143280 €
Buy

Antiseptic resistance of textiles

Determination of antiseptic resistance of textiles by an inhouse method.
83186 €
Ask more

Appearance changes in textiles after the Martindale abrasion test

EN ISO 12947-4
As a part of ISO 12947, this method is used to asses the appearance changes of textiles that have undergone the martindale abrasion test. The test is applicable to all uncoated fabrics.
108211 €
Ask more

Area weight of textiles

EN 12127
A test method to determine the mass per unit area of textiles and fabrics by using small samples.
17119 €
Ask more

Aroma compound quantification from food samples

Identification of certain aroma compounds by GC-MS technique. The method is based on comparing the GC-MS signal to the corresponding isotopically labeled standard for each aroma compound.
299399 €
Ask more

Asbestos analysis from building materials

Qualitative light microscopic analysis of asbestos from building materials. The results are reported as ”detected / not detected”.
50135 €
Buy

Ash content of paper, board or pulp

ISO 1762
The test determines the ash content of papers, boards and pulps upon being ignited at 525 °C. The test will tell you the mass of the inorganics in your sample.
60115 €
Buy

Ash content of solid recovered fuels

EN 15403:2011
The method is used to determine the ash content of a solid recovered fuel sample.
64154 €
Buy

Ash content of solid recovered fuels

ISO 21656:2021
The method is used to determine the ash content of a solid recovered fuel sample.
64154 €
Buy

Auger electron spectroscopy (AES)

Auger Electron Spectroscopy (AES) is a fundamental analytical technique that is used to analyze the characteristics of different types of surfaces. It is able to ascertain data about the elemental composition and depth profile, as well as produce surface images of various types of conducting and semiconducting materials.

Bending stiffness of corrugated cardboard

ISO 5628
Measures the board’s resistance to bending with 4-point loading. The test used to evaluate the cardboards stiffness.
85110 €
Buy

Benzoic acid analysis from beverages

Determination of benzoic acid from beverages using HPLC-DAD technique.
69186 €
Buy

Biobased carbon content according to ASTM D6866

ASTM D6866
Biobased carbon content of solid or liquid materials according to ASTM D6866 indicates how much of the samples carbon content is from renewal resources. Method includes removal of inorganic carbon if necessary prior to testing.
586671 €
Buy

Biobased carbon content from diesel and biofuel samples according to ASTM D6866

ASTM D6866
Biobased carbon content of liquid biofuels according to ASTM D6866 indicates how much of the samples carbon content is from renewal resources. Method includes removal of inorganic carbon if necessary prior to testing.
586671 €
Buy

Biobased carbon content of paint (based on TOC)

ASTM D6866
Biobased carbon content of paint according to ASTM D6866 indicates how much of the samples total organic carbon content is from renewal resources. Method includes removal of inorganic carbon prior to testing.
586697 €
Ask more

Blocking resistance of textiles

EN ISO 25978
Determines the blocking resistance of rubber- or plastic coated fabrics.
65168 €
Ask more

Boil shrinkage of yarns

Determination of yarn's boil shrinkage with an inhouse method.
32134 €
Ask more

Box compression test

PN-EN ISO 12048:2002
This method is used for testing the resistance to compression of complete, filled transport packages and for carrying out a stacking test on complete, filled transport packages using the same apparatus.
286386 €
Buy

Box compression test (BCT)

PN-EN ISO 12048:2002
Box compression test (BCT) is a mechanical durability test that is designed for complete, filled transport packages. The test data is given as a plot of deformation vs.
114214 €
Buy

Bulk of paper or board

Bulk is the ratio of paper's or board's thickness to its basis weight.
70112 €
Buy

Bursting strength of corrugated cardboard

ISO 2759
Burst strength measures the maximum hydraulic pressure that the sample withstands without breaking. Burst strength of paper or board is a commonly used test value alongside bending stiffness and crush tests.
80188 €
Buy

Bursting strength of paper or board

ISO 2759
Burst strength measures the maximum hydraulic pressure that the sample withstands without breaking. Paper's or board's burst strength is the most commonly used test value alongside SCT (short term compression strength).
71110 €
Buy

Calorific value of solid fuels

ISO 18125
Determining the gross calorific value (the heating value) of a solid biofuel at constant volume and at the reference temperature 25 °C in a bomb calorimeter calibrated by combustion of certified benzoic acid. The heating value (calorific value or energy value) of fuel is the amount of heat released during the combustion of a specified amount of it.
140253 €
Ask more

Carbon (C), hydrogen (H), nitrogen (N) and sulphur (S) analysis from solid recovered fuels

ISO 21663:2020
The method is used to determine the concentrations of carbon, hydrogen, nitrogen and sulphur from solid recovered fuel samples. Methdod is suitable for samples with C > 0.1 %, N > 0.1 %, H > 0.1 % and S > 0.05 % concentration on dry matter basis.
73174 €
Buy

Cement heat of hydration

EN 196-11
Cement material heat of hydration test.
403510 €
Ask more

CH4, CO2, O2, N2, H2, + C2–C5 alkanes from biogas or natural gas

ASTM D1945, ASTM D1946, ASTM D3588
Biogas or natural gas analysis for CH4, CO2, O2, N2, H2, and C2–C5 alkanes. Determination of BTU.
611714 €
Buy

CH4, CO2, O2, N2, H2, H2O from biogas or natural gas

Biogas or natural gas analysis for CH4, CO2, O2, N2, H2, H2O Detection limits: 0.1 vol-%.
757865 €
Ask more

Change of dimensions of paper or board upon change of humidity or immersion in water

PN-85/P-50157 PN-92/P-50158 (idt ISO 5635:1978)
With this test the dimensional changes of paper sample is measured after being immersed in water. The measurement is taken in machine and cross direction and the dimensional changes are compared to a sample previously conditioned in standard atmosphere.
43143 €
Buy

Chemical composition of copper alloys with OES

EN 15079:2015
Optical emission spectrometry is used to determine the chemical composition of a plate like copper sample. The elmenental composition result is expressed as mass percentages in the sample.
257365 €
Ask more

Chemical oxygen demand (COD) of pulp process liquids

ISO 6060
Measuring the chemical oxygen demand (COD) of pulp process liquid samples to evaluate the environmental burden of the water sample. Sample must be kept at temperature <5° C and analysed within 5 days from sampling.
34123 €
Ask more

Child use and care articles – Cutlery and feeding utensils – Testing of physical and mechanical properties (EN 14372)

EN 14372
Testing according to the standard EN 14372 for the mechanical and physical properties and safety of cutlery and feeding utensils intended for children 0 to 48 months of age.
675 €
Ask more

Child use and care articles – Drinking equipment – Testing of physical and mechanical properties (EN 14350)

EN 14350
Testing according to the standard EN 14350 for the mechanical and physical properties and safety of drinking equipment intended for children 0 to 48 months of age.
860 €
Ask more

Chloride from solid matrices, water soluble, one step batch extraction

EN 12457-2
Determination of water soluble chloride from solid matrices. Chloride is extracted from the dried sample with water in a single-stage shaking test at room temperature (20 ± 5 ° C) according to EN 12457-2.
65156 €
Ask more

CHNOS analysis of organic materials

Dumas combustion method, Unterzaucher pyrolysis method
Determination of carbon, hydrogen, nitrogen, sulfur, and oxygen content of the organic sample. CHNS analysis is performed using Dumas combustion method, where the sample is combusted at elevated temperature followed by gas chromatography separation and detection using thermal conductivity.
57279 €
Buy

CIE whiteness of paper or paperboard

ISO 11476
The method measures the whiteness of paper or board under the CIE D65 daylight standard. The method gives the full visible spectral range (VIS) information about whiteness, unlike the ISO (ISO 2470) method, which operates only in the blue light region.
60115 €
Buy

CO2 transmission rate through film and sheeting

ASTM F2476-20
This method determines the transmission rate of carbon dioxide (CO2) through a single or multi-layer plastic films and sheeting with an infrared detector. The measurement is done with two parallel specimen for each sample.
419498 €
Buy

Coating adhesion of textiles

EN ISO 2411
Determines the coating adhesion strength of coated fabrics. Knowing the adhesion strength of the coating to the fabric is important, because poor adhesion strength may ofter result in failure of the product.
99201 €
Ask more

Coefficient of friction of plastic films

ISO 8295:1997
The method measures the coefficients of starting and sliding friction of plastics film and sheeting when sliding over the same or other substances. The measurement can be used for quality control of film samples.
234449 €
Buy

Coefficient of static friction of paper or board

TAPPI 503 om-94 TAPPI 542 om-88 TAPPI 815 om-90
With this test, the coefficient of static friction of most packaging materials can be measured. The test standard will be chosen depending on customer request and end-use applications of the product.
193293 €
Buy

Cold water shrinkage of textured yarns

Determination of yarn shrinkage in cold water by an inhouse method.
42144 €
Ask more

Colour fastness of textiles of leather to water spotting

EN ISO 15700
This test determines the resistance of color of leather to spotting by water.
20126 €
Ask more

Colour fastness of textiles to acid spotting

EN ISO 105-E05
This test determines the resistance of color of all kinds of textiles to dilute solutions of organic and mineral acids.
42144 €
Ask more

Colour fastness of textiles to alkaline and acidic perspiration

EN ISO 105-E04
This test determines the resistance of color of all kinds of textiles to human perspiration.
58161 €
Ask more

Colour fastness of textiles to alkaline spotting

EN ISO 105-E06
This test determines the resistance of color of all kinds of textiles to spotting by alkaline solutions.
42144 €
Ask more

Colour fastness of textiles to artificial sweat

DIN 53160-2
This test determines the resistance of color of all kinds of textiles to artificial sweat.
42144 €
Ask more

Colour fastness of textiles to chlorinated water

EN ISO 105-E03
This test determines the resistance of color of all kinds of textiles to chlorinated water. This test can be used to evaluate color fastness of textiles that are intended to be used as swimwear.
42144 €
Ask more

Colour fastness of textiles to hot pressing (dry, damp or wet)

EN ISO 105-X11
This test determines the resistance of color of all kinds of textiles to ironing and hot pressing. The test can be done on dry, damp or wet textiles depending on the end-use of the textile.
25128 €
Ask more

Colour fastness of textiles to hot water

EN ISO 105-E08
This test determines the resistance of color of all kinds of textiles to hot water.
25128 €
Ask more

Colour fastness of textiles to hypochlorite bleaching

EN 20105-N01
This test determines the resistance of color of all kinds of textiles to hypochlorite bleaching.
42144 €
Ask more

Colour fastness of textiles to mercerizing

EN ISO 105-X04
This test determines the resistance of color of all kinds of textiles to concentrated solutions of sodium hydroxide. The method is mainly used for cotton and mixtures containing cotton.
42144 €
Ask more

Colour fastness of textiles to mild hypochlorite bleaching

DIN 54034
This test determines the resistance of color of all kinds of textiles to mild hypochlorite bleaching.
92194 €
Ask more

Colour fastness of textiles to organic solvents

EN ISO 105-X05
This test determines the resistane of color of all kinds of textiles to organic solvents.
32134 €
Ask more

Colour fastness of textiles to peroxide bleaching

EN ISO 105-N02
This test determines the resistance of color of all kinds of textiles to peroxide bleaching.
42144 €
Ask more

Colour fastness of textiles to rubbing with organic solvents

EN ISO 105-D02
This test determines the resistance of color of all kinds of textiles to the combined action of rubbing and of organic solvents.
25128 €
Ask more

Colour fastness of textiles to saliva

DIN 53160-1
This test determines the resistance of color of coloured toys to saliva and perspiration.
42144 €
Ask more

Colour fastness of textiles to sea water

EN ISO 105-E02
This test determines the resistance of color of all kinds of textiles to sea water.
42144 €
Ask more

Colour fastness of textiles to washing with soap

EN ISO 105-C10, EN ISO 105-C06, EN ISO 105-C08, EN ISO 105-C09
This test measures the color fastness of textiles in domestic and commercial laundering processes according to the EN ISO 105-C standard. The testing options are: • EN ISO 105-C10 Colour fastness of textiles to washing in – 40°C, 50°C, 60°C or 95°C with soap • EN ISO 105-C06 Colour fastness of textiles to domestic & commercial laundering –40°C, 50°C, 60°C, 70°C or 95°C with detergent • EN ISO 105-C08 Colour fastness of textiles to domestic and commercial laundering by using a non-phosphate reference detergent • EN ISO 105-C09 Colour fastness of textiles to domestic and commercial laundering – Oxidative bleach by using a non-phosphate reference detergent.
42144 €
Ask more

Colour fastness of textiles to water

EN ISO 105-E01
This test determines the resistance of color of all kinds of textiles to water.
42144 €
Ask more

Colour fastness to water spotting

EN ISO 105-E07
This test determines the resistance of color of all kinds of textiles to spotting by water. In the test, water droplets are placed on the textile and the color change is assessed with grey scale after 2 minutes and after drying.
25126 €
Ask more

Colour of paper or board

ISO 5631-1&2
This method provides measuring the colour of paper and board by the diffuse reflectance method with the elimination of specular gloss. It does not apply to papers which incorporate fluorescent pigments determine the colour of papers or boards which contain whitening agents provided the UV content of the illumination on the test piece has been adjusted to conform to that in the CIE illuminant C, using a fluorescent reference standard that fulfils the requirements for international fluorescent reference standards of level 3 (IR3) as prescribed by ISO 2469 with an assigned ISO brightness value (C/2°) provided by an authorized laboratory, as described in ISO 2470‑1.
64164 €
Buy

Concora medium test (CMT30) for flutings

EN ISO 7263:2011
This method is used to determine the flat crush resistance of a corrugating medium after being fluted to A-flute geometry with a laboratory fluting device. This test can be used for any corrugating medium that is intended to be used on a corrugated board.
121221 €
Buy

Conductivity of aqueous extracts of paper, board or pulp

PN-ISO 6587:1994
With this test, the conductivity of water extraction (hot or cold) from a paper, board or pulp sample is measured. The extraction is performed with deionized water, therefore the results may vary slightly from samples that are taken in mill process conditions.
129229 €
Buy

Content of heavy metals according to Directive 94/62/EC

The directive 94/62/EC limits the content of heavy metals such that the sum of concentration levels of lead, cadmium, mercury and hexavalent chromium present in packaging or packaging components shall not exceed 100 ppm by weight.
184 €
Ask more

Crease resistance of dry textiles

DIN 53890
This test is used to determine the crease recovery angle of textiles.
33136 €
Ask more

Cross-sectional HR-TEM imaging + EDX + FIB

Cross-sectional imaging of a sample with a high-resolution transmission electron microscope (HR-TEM) and determination of the elemental composition of the sample using electron dispersive X-ray spectroscopy (EDX). The cross-sectional sample is prepared using focused ion beam (FIB).
2,0042,304 €
Buy

Cross-sectional HR-TEM imaging with FIB sample preparation

Cross-sectional imaging of a sample with a high-resolution transmission electron microscope (HR-TEM). Samples are prepared with focused ion beam (FIB).
1,6891,989 €
Buy

Degree of curl after one-sided wetting of paper or board

TAPPI 466 wd-99
Determination of degree of curl after one sided wetting as per TAPPI 466 standard for paper or board samples.
43143 €
Buy

Degree of curl with changes in the humidity of air of paper or board

ISO 11556:2005
Determination of degree of curl of paper or boards by using a vertically suspended test piece as per standard ISO 11556. Curl is defined as deviation from a flat surface.
150250 €
Buy

Degree of substitution of chemically modified carbohydrates

Determination of degree of substitution of chemically modified carbohydrate samples with 31P NMR method. Suitable for mono-, di-, oligo- and polysaccharides.
197453 €
Buy

Delamination of fusible interlinings from upper fabric

DIN 54310
Determines the delamination of fusible interlinings from upper fabrics with mechanical delamination test.
55158 €
Ask more

Density determination from plastics and polymers

ISO 1183-1
Density determination for plastics and polymers by immersion method. Method is suitable for plastic granulates or for products and materials delivered as a sheets that can be cut to the right shape in the lab.
120201 €
Buy

Determination of photochromism from textiles

EN ISO 105-B05*
This test determines the resistance of color of textiles designed to change colour (photochromatic textiles) in the light upon brief exposure to light.
125228 €
Ask more

Determination of phthalates in extracts from paper and paperboard

EN 16453
Migration of phthalates from a paper or paperboard sample intended as food contact material.
242 €
Ask more

Determination of polycyclic aromatic hydrocarbons (PAH) from paper and paperboard

Content of polycyclic aromatic hydrocarbons in a paper or a paperboard sample intended as food contact material.
202 €
Ask more

Diesel exhaust fluid testing according to ISO 22241:2019

ISO 22241:2019
Diesel exhaustive fluid (DEF) solution is an additive used in diesel engines. When AdBlue is injected into the exhaust gas, the catalyst neutralizes the nitrogen oxides.
250368 €
Buy

Diesel fuel cetane number

ASTM D613
Determination of diesel fuel cetane number using a single-cylinder four-stroke engine with adjustable compression ratio. Cetane number range 0–100, typically 30–65 in the measurements.
208366 €
Buy

Dietary supplement analysis package

Purity analysis of a food supplement includes the following determinations: • Heavy metals (As, Cd, Hg and Pb) • Aerobic microbes • E. Coli • Coliform bacteria • S.
290382 €
Buy

Dimensional change in washing and drying of textiles

DIN EN ISO 6330 + DIN EN ISO 5077 + DIN EN ISO 3759
This test is a combination of three ISO standards that are together used to asses dimensional changes in textiles after a domestic washing and drying cycles. The results are expressed as percentages (%) of either extension (+) or shrinkage (–).
42144 €
Ask more

Dimensional change of textiles after dry cleaning

EN ISO 3175-1* + EN ISO 3759
This test is a combination of two testing standards that are used to asses the dimensional changes in textiles and clothes after a dry cleaning process. The results are expressed as percentages (%) of either extension (+) or shrinkage (–).
45148 €
Ask more

Dimensional change of textiles after hand wash

This test utilizes an inhouse standard to determine the dimensional change in textile, fabric or clothing article after a hand wash.
42144 €
Ask more

Dimensional change of textiles after ironing

DIN 53894-1; DIN EN ISO 3759
This test is a combination of two standards that are together used to determine dimensional changes in textiles or clothing after ironing. The results are expressed as percentages (%) of either extension (+) or shrinkage (–).
31134 €
Ask more

Dimensional change of textiles exposed to cold water

This test utilizes an inhouse standard to determine the dimensional change in textile, fabric or clothing article after being exposed to cold water.
32134 €
Ask more

Dimensional change of textiles exposed to dry air

This test utilizes an inhouse standard to determine the dimensional change in textile, fabric or clothing article after being exposed to dry air.
48151 €
Ask more

Distortion of textiles, determination of skew and bow

EN ISO 13015
This test determines the distortion of a woven fabric in which the weft yarns are perpendicular to the warp yarns.
25128 €
Ask more

Dry air shrinkage of yarns

Determination of yarn shrinkage in dry air by an inhouse method.
32134 €
Ask more

Edgewise crush test (ECT) from cardboard

ISO 3037
Edgewise crush test (ECT) measures the edge strength of boards. The results give indication about the board's resistance to crushing during processing and use.
70110 €
Buy

Elastomer composition of rubber blends with FTIR and H-NMR

Package deal of FTIR and proton NMR to determine the complete elastomer composition of rubber blends. This combination of methods gives a complete picture of different elastomers in the sample and their relative mass percentages.
1,7141,822 €
Ask more

Electrostatic behaviour of textiles

54345-1
This test is used to evaluate textile's electrostatic properties by measuring the electrical resistance.
103206 €
Ask more

Elemental analysis of wood or pulp

EPA 6020B
Determining content of S, Na, K, Ca, Fe, Cu, Mg, Mn, Si and P from a wood or pulp powder sample. Sample was microwave digested using a solution of HF + HNO3 + HCl prior to the analysis.
122241 €
Ask more

Elemental quantification with XRF from solid and liquid samples

XRF is a quantitative and qualitative method that can be used used for solid and liquid materials. The method is capable of quantifying elements from fluorine to uranium from solid and liquid samples.
213321 €
Buy

Elements (Cd, Al, Hg, Pb) from a cold water extract of paper and board

EN 12497, EN 12498, EN 645
Migration of heavy metals and aluminum to cold water from a paper or paperboard sample intended as food contact material.
142 €
Ask more

Elongation of surgical dressing

DIN 61632
Determines the elongation properties of textile elastic cotton crepe bandages.
55157 €
Ask more

EN ISO 1182, Reaction to fire tests for products – Non-combustibility test

EN ISO 1182
This test is used to evaluate the non-combustibility properties of construction materials. This test is included in the EN 13501-1 fire classification standard for classifications A1, A2, A1fl, A2fl, A1L and A2L.
952 €
Ask more

EN ISO 1716:2018, Reaction to fire tests for products. Determination of the gross heat of combustion (Calorific value)

ISO 1716:2018
This method is used to determine the gross heat of combustion (QPCS) of solid products at constant volume in a bomb calorimeter in units J / kg. If the material is non-homogeneous, meaning that it consists of multiple materials, each material must be tested separately.
687 €
Ask more

Fabric electrostatic properties – surface resistivity

EN 1149-1
Surface resistivity testing of clothing or gloves. Standardised test method for protective clothing with electrostatic dissipation for preventing incendiary discharge.
186289 €
Ask more

Face mask bacterial filtration efficiency according to EN 14683 standard

EN 14683:2019
Accredited testing of the bacterial filtration efficiency (BFE) of face masks according to EN 14683 standard.
1,1821,294 €
Ask more

Face mask bioburden test according to EN 14683 standard

EN 14683:2019
Accredited testing of the microbiological cleanliness (Bioburden) of face masks according to EN 14683 standard. The results include the viable aerobic bacteria, yeasts and molds.
273385 €
Ask more

Face mask blood splash resistance according to EN 14683 standard

EN 14683:2019
Accredited testing of the blood splash resistance of face masks according to EN 14683 standard.
1,0911,203 €
Ask more

Face mask differential pressure according to EN 14683 standard

EN 14683:2019
Accredited testing of the differential pressure of face masks according to EN 14683 standard.
636749 €
Ask more

Face mask type II tests according to EN 14683 standard

EN 14683:2019
Accredited testing of the performance of type II face masks according to EN 14683 standard. The tests include bacterial filtration efficiency (BFE), differential pressure (DP) and microbiological cleanliness (Bioburden).
2,0032,203 €
Ask more

Face mask type IIR tests according to EN 14683 standard

EN 14683:2019
Accredited testing of the performance of type II face masks according to EN 14683 standard. The tests include bacterial filtration efficiency (BFE), differential pressure (DP) and microbiological cleanliness (Bioburden).
3,0943,294 €
Ask more

Fastness to light – Xenotest of paper or board

PN-EN ISO 105-B02:2006 ISO 12040:1997
This test is used to determine the effect of artificial daylight (D65) on the colour of the paper.
114214 €
Buy

Fatty acids and resin acids from water

Determination of resin fatty acids by GC-MS. The measurement includes the determination of the following compounds: • Dichloro-9,10-stearic acid • Linoleic acid • Linolenic acid • Oleic acid • Palmitic acid • Palmitoleic acid • Stearic acid • Abietic acid • Chlorodehydroabietic acid • Dehydroabietic acid • Dichloro-12,14-dehydroabietic acid • Isopimaric acid • Levopimaric acid • Neoabietic acid • Palustric acid • Pimaric acid • Sandarakoparic acid • Total fatty acids • Total resin acids.
500638 €
Buy

Fibre furnish analysis with Hertzberg staining test

ISO 9184-3
This test can be used to determine the main fibre content of papers and boards. In the test a saturated solution of zinc chloride, iodine and potassium iodide is used to colour the paper.
150250 €
Buy

Fibre length of threads

Determination of fibre length by an inhouse method.
232334 €
Ask more

Filament count of fibres and threads

The filament count of fibres and threads in textile samples is determined by an inhouse method.
65168 €
Ask more

Flat crush test (FCT) from corrugated cardboard

ISO 3035
The flat crush test (FCT) is a commonly used mechanical test conducted on cardboards, such as corrugated cardboard. In the tests, the sample is loaded perpendicular to its surface.
70110 €
Buy

Fluoride (F–) content in water sample

ISO 10304
Determination of the fluoride (F-) content in a water sample by ion chromatography (IC) technique. Results will be reported in unit mg/l.
68175 €
Buy

Fluoride from solid matrices, water soluble, one step batch extraction

EN 12457-2
Determination of water soluble fluoride from solid matrices. The fluoride is extracted from the dried sample with water in a single-stage shaking test at room temperature (20 ± 5 ° C) according to EN 12457-2.
65156 €
Ask more

Fluorine content of combustible organic materials

EN 12457-2
Determination of fluorine content of solid combustible matrices through combustion in oxygen rich atmosphere, followed by analysis with ion chromatography (IC). The test is performed according to EN 15408.
129237 €
Ask more

Fluorine content of solid fuels

DIN 51723
Determination of fluorine content of solid fuels according to DIN 51723 method. The fluoride content of the sample will be obtained by distillation with overheated water vapor of a solution in phosphoric acid or by pyrolitic treatment in a humid oxygen flow.
189295 €
Ask more

Folding endurance of paper and board

ISO 5626
This test is used to determine the folding endurance of papers and boards using the Köhler-Molin, Lhomargy, MIT and Schopper testers. In the test, a narrow strip of paper is folded forwards and backwards in a standardized manner so that is subjected to longitudinal stress until it breaks.
107207 €
Buy

Food contact compliancy for single-use nitrile gloves test package (BfR XXI/1)

Test package for single-use nitrile gloves for food contact compliancy according to BfR XX1/1 and 1935/2004. The package includes the following tests: • Overall migration testing for all foodstuffs (simulants A, B, and D2) • Sensory testing according to DIN 10955 • Specific migration of lead, zinc, and aluminum according to BfR XXI/1.
2,349 €
Ask more

Force and elongation of textiles – strip method

ASTM D 5035-95
This test is used to determine the breaking force and elongation of fabrics and textiles. This test is not recommended for fabrics with high stretch (over 11%), but it can be used for most other fabrics.
57159 €
Ask more

Fosetyl-Al and phosphonic acid from soil

The measurement includes the analyzes listed below: Phosphorous acid and its salts expressed as phosphorous acid Phosphonic acid (phosphorous acid) expressed as fosetyl Fosetyl (ethyl hydrogen phosphonate) Fosetyl-Al (sum of fosetyl, phosphonic acid and their salts, expressed as fosetyl). The results of the analyzes are expressed in unit mg/kg.
189296 €
Ask more

GC-MS screening analysis

Qualitative screening analysis of volatile organic compounds in a sample with gas chromatography - mass spectrometry (GC-MS). The method is suitable for detecting various organic compounds with low polarities in different sample matrices.
312449 €
Ask more

GI-XRD of thin films

Grazing Incidence X-ray diffraction (GI-XRD) measurement of thin film samples.
179298 €
Buy

Gloss of paper or board

EN ISO 8254-1
This method provides the measurement of the specular gloss of paper at an angle of 75° to the normal to the paper surface. Although its chief application is for coated papers, it may also be used for glossy uncoated papers such as supercalendered papers.
57157 €
Buy

Glycan profiling (N- and O-linked) from protein samples

Profiling of N- and O-linked glycans from protein samples by Mass Spectrometry. Analysis of N-linked glycans includes: PNGase digestion of the proteins to liberate N-glycans, permethylation of N-glycans and analysis of native and permethylated glycans by Mass Spectrometry.
2,240 €
Ask more

Grammage of component papers after separation from corrugated cardboard

EN ISO 3039
Grammage measures the weight of the sample related to its area. Grammage values are commonly used to categorize different board and paper grades.
150174 €
Buy

Gravimetric oil content measurement of oilseed grist with hexane extraction method

MSZ EN ISO 734:2016
The gravimetric oil content measurement contains hexane (or light-petroleum) sample extraction. After the extraction the solvent is evaporated and remaining oil content is determined with a precision scale.
275388 €
Ask more

Grease resistance of paper and board with palm oil method

ISO 16532-1
Determination of the grease resistance of paper and board. The test is primarily intended to establish a level of grease resistance by determining the time taken for a simulated “fat material” (palm kernel oil) to penetrate (break-through) the sheet for papers such as food board, and greaseproof and vegetable parchment.
157265 €
Buy

Grease resistance of paper or board with the KIT test

TAPPI 559 pm-96
In this test the grease resistance of paper is evaluated by using castor oil, n-heptane and toluene mixtures as per TAPPI 559 standard. A drop of the test liquid is dropped on the paper and after 15 seconds the drop is wiped off.
107207 €
Buy

Grease resistance of paper or board with the turpentine method

TAPPI 454 om-94
This test compares penetration of greases and oil, commonly found inf foodstuffs. This test can be used to evaluate and grade the usability of greaseproof papers and vegetable parchments.
171271 €
Buy

H2O (ppm level) from biogas or natural gas

Water (H2O) content from biogas or natural gas sample.
529636 €
Ask more

Hardness of plastics

EN ISO 2039-1 or EN ISO 868
This test can be used to determine the hardness of plastics with the ball indentation or shore hardness method. This test is done at room temperature and includes three measurements per sample.
75155 €
Buy

Heat Deflection Temperature (HDT) of plastics

EN ISO 75-1/2
Heat deflection temperature (HDT) is a measure of a plastic's resistance to deformation at a given load at an elevated temperature. It is defined as the temperature where the sample specimen will bend 0.25 mm under given weight.
107220 €
Buy

Horizontal impact test

PN-EN ISO 2244:2007
This test is used to determine the effect of a vertical impact test on a horizontal edge on complete filled transport packaging. In the test, the packaging is placed on a carriage that is rolled against an impact apparatus.
243343 €
Buy

Hydrogen peroxide concentration determination for aqueous solutions

EN 902
Determination of hydrogen peroxide (H2O2) concentration of aqueous solutions. Determination is performed using titrimetric method with potassium permanganate solution.
111217 €
Ask more

Hydrogen Sulphide, H2S, content from gas

Biogas or natural gas analysis for Hydrogen Sulphide, H2S Detection limit 1 ppm-vol The prices are for one sample incl. one multifoil bag for sample gathering.
483 €
Ask more

Hydrostatic pressure of textiles

AATCC 127 (up to 2.000 mbar)
The test measures the textile's resistance to water with the hydrostatic pressure method accorg to AATCC 127 standard. In this test, one surface of the sample is subjected to hydrostatic pressure which is increased at a constant rate, until three points of leakage appear on the other surface.
82184 €
Ask more

ICP-MS / ICP-OES measurement package for water sample (Al, As, Ba, B, Cd, Ca, Cr, Cu, Sn, Fe, Mg, Hg, Pb, K, Se, Na, Sr, Zn)

SFS-EN ISO 11885:2009, SFS-EN ISO 17294-2:2005
Determination of Al, As, Ba, B, Cd, Ca, Cr, Cu, Sn, Fe, Mg, Hg, Pb, K, Se, Na, Sr, Zn from water samples using ICP-technique. The results are presented in the unit µg / l.
68179 €
Ask more

ICP-MS heavy metals for water sample (Sb, As, Hg, Cd, Co, Cr, Cu, Pb, Ni, Zn, V)

VNa 214/2017 (AFS / EPA 200.8, EN ISO 17294-2, EPA 6020A, EPA 245.7, EPA 1631, EN ISO 178 52, EN 16192)
Determination of Sb, As, Hg, Cd, Co, Cr, Cu, Pb, Ni, Zn and V from water samples with ICP-MS-technique. The concentration of each element is expressed in units µg/l in the results.
65153 €
Buy

ICP-MS measurement (wide) for water sample (Be, Ba, Co, Al, Mg, Cu, Li, Mn, Ag, Sn, Ti, V, Zn, Tl, B, Hg, Mo, Fe, Ca, K, U, P, Cd, Na, Cr, Ni, Pb, Sb, As, Se)

VNa 214/2017 (AFS / EPA 200.8, EN ISO 17294-2, EPA 6020A, EPA 245.7, EPA 1631, EN ISO 178 52, EN 16192)
Determination of Be, Ba, Co, Al, Mg, Cu, Li, Mn, Ag, Sn, Ti, V, Zn, Tl, B, Hg, Mo, Fe, Ca, K, U, P, Cd, Na, Cr, Ni, Pb, Sb, As and Se in water sample with ICP-MS-technique. The concentration of the each element is reported in the unit µg / l in the results.
85180 €
Buy

ICP-MS metal screening of solvent samples

ICP-MS technique provides information on the concentrations of metals in a sample. The measurement includes the following elements: Na, Mg, K, Ca, Li, Be, B, Al, Si, P, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Ga, As, Se, Rb, Sr, Zr, Nb, Mo, Ag, Cd, In, Sn, Sb, Te, Cs, Ba, Hf, Hg, Tl, Pb, Bi, U.
293395 €
Ask more

ICP-MS nutrients from food sample (Ca, P, Na, Mg, Zn, Mn, Cu, I, Se, Co)

Determination of calcium (Ca), phosphorus (P), sodium (Na), magnesium (Mg), zinc (Zn), manganese (Mn), iodine (I), copper (Cu), selenium (Se) and cobalt (Co) concentrations from food sample with ICP-MS-technique.
189296 €
Ask more

ICP-OES heavy metals for soil, sludge or sediment (As, Cd, Co, Cr, Cu, Hg, Ni Pb, Sb, V and Zn)

VNa 214/2017 (EPA 200.7, ISO 11885, EPA 6010, SM 3120, EPA 3050, CSN 13657)
ICP-OES heavy metal measurement for soil, sludge or sediment samples. The assay includes the pre-treatment of the sample with aqua regia decomposition and the measurement of the following elements using ICP-OES technique: Ag, Cd, Co, Cr, Cu, Hg, Ni, Pb, Sb, V and Zn.
75159 €
Buy

ICP-OES measurement (wide) for waste and construction materials (Ag, As, Ba, Be, Cd, Co, Cr, Cu, Fe, Hg, Li, Mn, Mo, Ni, Pb, Sb, Sn, Sr, Tl, V and Zn)

EPA 200.7, ISO 11885, EPA 6010, SM 3120, EPA 3050, CSN 13657
ICP-OES measurement package for waste and construction material samples. The assay includes the pre-treatment of the sample with aqua regia decomposition and the measurement of the following elements using ICP-OES technique: Ag, As, Ba, Be, Cd, Co, Cr, Cu, Fe, Hg, Li, Mn, Mo, Ni, Pb, Sb, Sn, Sr, Tl, V and Zn.
82195 €
Buy

ICP-OES measurement for waste and construction material (Al, B, Bi, Ca, K, Mg, Na, S, Se, Si, Te, Ti, Zr)

VNa 214/2017 (EPA 200.7, ISO 11885, EPA 6010, SM 3120, EPA 3050, CSN 13657)
Determination of Al, B, Bi, Ca, K, Mg, Na, S, Se, Si, Te, Ti and Zr from waste and construction material samples with ICP-OES-technique. The sample is pretreated by aqua regia extraction.
78165 €
Buy

ICP-OES metals for soil, sludge or sediment (Ag, As, Ba, Be, Cd, Co, Cr, Cu, Fe, Hg, Li, Mn, Mo, Ni, Pb, Sb, Sn, Sr, Tl, V and Zn)

EPA 200.7, ISO 11885, EPA 6010, SM 3120, EPA 3050, CSN 13657
ICP-OES measurement package for soil, sludge or sediment samples. The assay includes the pre-treatment of the sample with aqua regia decomposition and the measurement of the following elements using ICP-OES technique: Ag, As, Ba, Be, Cd, Co, Cr, Cu, Fe, Hg, Li, Mn, Mo, Ni, Pb, Sb, Sn, Sr, Tl, V and Zn.
80168 €
Buy

ICP-OES nutrients for soil, sludge or sediment (Al, B, Bi, Ca, K, Mg, Na, S, Se, Si, Te, Ti and Zr)

EPA 200.7, ISO 11885, EPA 6010, SM 3120, EPA 3050, CSN 13657
ICP-OES nutrient measurement package for soil, sludge or sediment samples. The assay includes the pre-treatment of the sample with aqua regia decomposition and the measurement of the following elements using ICP-OES technique: Al, B, Bi, Ca, K, Mg, Na, S, Se, Si, Te, Ti and Zr The concentrations of the measured elements are expressed in unit mg / kg d.m.
70183 €
Ask more

ICP-SFMS elemental analysis from plastics and polymers

The measurement is performed using a high-resolution ICP-MS technique (ICP-SFMS), which is able to identify very low elemental concentrations. The measurement includes only the selected element or elements from the list below: Ag, Al, As, Au, B, Ba, Be, Bi, Ca, Cd, Ce, Co, Cr, Cs, Cu, Dy, Er, Eu, Fe, Ga, Gd, Ge, Hf, Hg, Ho, Ir, K, La, Lu, Mg, Mn, Mo, Na, Nb, Nd, Ni, P, Pb, Pd, Pr, Pt, Rb, Re, Rh, Ru, S, Sb, Sc, Se, Sm, Sn, Sr, Ta, Tb, Te, Th, Ti, Tl, Tm, U, V, W, Y, Yb, Zn and Zr.
164282 €
Buy

ICP-SFMS metal screening (70 elements)

Metal screening analysis includes the semi-quantitative determination of 70 elements. The method is suitable e.g.
586698 €
Buy

ICP-SFMS metals from fertilizer raw materials

Analysis includes acid degradation of the sample and determinations of As, Cd, Co, Cr, Cu, Hg, Mn, Ni, Pb and Zn using ICP-SFMS technique (high resolution ICP-MS). The concentrations of the elements are presented in the results in unit mg/kg d.m.
157271 €
Ask more

ICP-SFMS metals from liquid chemicals (Al, As, B, Ba, Ca, Cd, Co, Cr, Cu, Fe, Hg, K, Mg, Mn, Mo, Na, Ni, P, Pb, S, Si, Sr, Zn)

ICP-SFMS measurement package for liquid chemical. The assay includes the measurement of the following elements using high resolution ICP-tecnique (ICP-SFMS): Al, As, B, Ba, Ca, Cd, Co, Cr, Cu, Fe, Hg, K, Mg, Mn, Mo, Na, Ni, P, Pb, S, Si, Sr and Zn.
360473 €
Ask more

Identification of chemical functionalities with Raman spectroscopy from aqueous solution samples

Identification of chemical groups from aqueous solutions using Raman-spectroscopy. Results will be delivered as raw data and spectra.
400513 €
Buy

Identification of chemical groups with FTIR from aqueous solution samples (three samples)

Identification of chemical groups from aqueous solutions using Fourier transform infrared spectroscopy (FTIR). Results will be delivered as raw data and spectra.
314398 €
Buy

Identification of chemical groups with FTIR from solid samples

Qualitative identification of chemical groups from solids and by using Fourier transform infrared spectroscopy (FTIR). Results will be delivered as an FTIR spectrum.
8098 €
Buy

IMO 2010 FTPC Part 1 – Non-combustibility test

IMO 2010 FTPC Part 1 (IMO Resolution MSC.307(88) Annex 1 Part 1) Non-combustibility test Materials for maritime use are tested according to the IMO 2010 FTP Code (International Maritime Organization Fire Testing Procedures Code). Results can be used for type approval (wheel mark).
1,070 €
Ask more

IMO 2010 FTPC Part 2 – Smoke and toxicity test

IMO 2010 FTPC Part 2 (IMO Resolution MSC.307(88) Annex 1 Part 2) - Smoke and toxicity test Materials for maritime use are tested according to the IMO 2010 FTP Code (International Maritime Organization Fire Testing Procedures Code). Results can be used for type approval (wheel mark).
2,779 €
Ask more

IMO 2010 FTPC Part 5 – Test for surface flammability

IMO 2010 FTPC Part 5 (IMO Resolution MSC.307(88) Annex 1 Part 5) - Test for surface flammability Materials for maritime use are tested according to the IMO 2010 FTP Code (International Maritime Organization Fire Testing Procedures Code). Results can be used for type approval (wheel mark).
863 €
Ask more

IMO 2010 FTPC Part 7 – Test for vertically supported textiles and films

IMO 2010 FTPC Part 7 (IMO Resolution MSC.307(88) Annex 1 Part 7) Test for vertically supported textiles and films Materials for maritime use are tested according to the IMO 2010 FTP Code (International Maritime Organization Fire Testing Procedures Code). Results can be used for type approval (wheel mark).
532 €
Ask more

IMO 2010 FTPC Part 8 – Test for upholstered furniture

IMO 2010 FTPC Part 8 (IMO Resolution MSC.307(88) Annex 1 Part 8) Test for upholstered furniture Materials for maritime use are tested according to the IMO 2010 FTP Code (International Maritime Organization Fire Testing Procedures Code). Results can be used for type approval (wheel mark).
689 €
Ask more

IMO 2010 FTPC Part 9 – Test for bedding components

IMO 2010 FTPC Part 9 (IMO Resolution MSC.307(88) Annex 1 Part 9) - Fire test for bedding components Materials for maritime use are tested according to the IMO 2010 FTP Code (International Maritime Organization Fire Testing Procedures Code). Results can be used for type approval (wheel mark).
398423 €
Ask more

Impact strength of plastics

ISO 179 or ISO 180
Impact strength can be measured from rigid plastics with the Charpy to Izod methods. In these tests, a pendulum is used to break down the sample specimen.
143222 €
Buy

Inhalable and respirable dust

The measurements determine the amount of inhalable and respirable dust fractions present in indoor air. The sample is collected using a sample collector and pump.
172459 €
Buy

Inhalable dust

The measurement determines the amount of inhalable dust present in indoor air. The sample is collected using a sample collector and pump.
86304 €
Buy

Intermingling point of yarns

Determination of the intermingling point of yarns by an inhouse method.
42144 €
Ask more

Internal bond strength of paper or board (Z-direction)

TAPPI 541 om-99
This test is used to provide insight into the paper or board performance of coated fine papers, adhesion at carton side seams and more. In the test, the tape is placed on both sides of the test specimen and the sample is pulled apart in the z-direction and the force required to delaminate the paper is measured.
107207 €
Buy

Iron ore elemental analysis with XRF

SS-ISO 9516
X-Ray Fluoresence (XRF) can be used to quantitatively determine the following minerals from iron ore: Al2O3, CaO, Cr2O3, Fe, K2O, MgO, Mn, Na2O, NiO, P, S, SiO2, V2O5 and TiO2. The method used in based on SS-ISO 9516-1:2018.
154262 €
Buy

ISO brightness of paper or paperboard

ISO 2470-1 and 2
The method measures the diffues blue light reflectance factor of paper and board. The method is limited to white and near white samples.
60115 €
Buy

Kappa number of paper, board or pulp

ISO 302:2015
Kappa number describes the lignin content or bleachability of pulp. With this test the kappa number is determined as per the ISO 302 standard, which is applicable ot all kinds of chemical and semi-chemical pulps within Kappa number range 1 to 100.
114214 €
Buy

Karl-Fischer titration for solvent samples

Karl Fischer titration is a classic titration method in chemical analysis that uses coulometric or volumetric titration to determine trace amounts of water in a sample.
85129 €
Buy

Kjeldahl nitrogen

Determination of nitrogen using Kjeldahl method.
70180 €
Ask more

Knot tensile test of single and plied yarns

53842-1
The test gives the tensile strength of single and plied yarns with the knot method.
58161 €
Ask more

LA-ICP-MS of thin film samples (1 elements)

Determination of metal concentration on ALD thin films using LA-ICP-MS. Measurement includes analysis of 1 element.
631768 €
Buy

LA-ICP-MS of thin film samples (70 elements)

Determination of metal concentration on ALD thin films using LA-ICP-MS. Measurement includes analysis of following elements: Ag, Al, As, Au, B, Ba, Be, Bi, Br, Ca, Cd, Ce, Co, Cr, Cs, Cu, Dy, Er, Eu Fe, Ga, Gd, Ge, Hf, Hg, Ho, I, In, Ir, K, La, Li, Lu, Mg, Mn, Mo, Na, Nb, Nd, Ni, Os, P, Pb, Pd, Pr, Pt, Rb, Re, Rh, Ru, Sb, Sc, Se, Sm, Sn, Sr, Ta, Tb, Te, Th, Ti, Tl, Tm, U, V, W, Y, Yb, Zn, Zr.
9141,052 €
Buy

LA-ICP-MS of thin film samples (standard elements)

Determination of metal concentration on ALD thin films using LA-ICP-MS. Standard analyses includes analysis of following elements: Ca, Cr, Cu, Co, Er, Fe, Ge, Pb, Mn, Mo, Ni, K, Na, Sn, Ti, Ta, Zn, Bi, Au, Sn, V, Sr ja Y.
793932 €
Buy

Lactic acid analysis from beverages

Determination of lactic acid from beverages using HPLC-MS technique.
75186 €
Buy

Landfill suitability test for conventional or hazard landfill (331/2013)

The Finnish Government Decree on Landfills (331/2013) requires the measurement of a specific set of analyzes from the waste material before its disposal to landfill. Analyzes for conventional/non-hazardous and hazard landfill: • Sample crushing to 4 mm • Dry matter (%) • Leaching test (EN 12457-3:2002) • Total organic carbon, TOC (%w/w) • pH • Acid neutralization capacity, ANC • Soluble metals (As, Ba, Cd, Cr, Cu, Hg, Mo, Ni, Pb, Sb, Se, Zn) (mg/kg) • Chloride, Cl (mg/kg) • Fluoride, F (mg/kg) • Sulphate, SO4 (mg/kg) • Dissolved organic carbon, DOC (mg/kg) • Total dissolved solids, TDS (mg/kg).
4501,005 €
Buy

Landfill suitability test for conventional or hazard landfill (331/2013) (express delivery)

The Finnish Government Decree on Landfills (331/2013) requires the measurement of a specific set of analyzes from the waste material before its disposal to landfill. Analyzes for conventional/non-hazardous and hazard landfill: • Sample crushing to 4 mm • Dry matter (%) • Leaching test (EN 12457-3:2002) • Total organic carbon, TOC (%w/w) • pH • Acid neutralization capacity, ANC • Soluble metals (As, Ba, Cd, Cr, Cu, Hg, Mo, Ni, Pb, Sb, Se, Zn) (mg/kg) • Chloride, Cl (mg/kg) • Fluoride, F (mg/kg) • Sulphate, SO4 (mg/kg) • Dissolved organic carbon, DOC (mg/kg) • Total dissolved solids, TDS (mg/kg).
894998 €
Buy

Landfill suitability test for inert landfill (331/2013)

The Finnish Government Decree on Landfills (331/2013) requires the measurement of a specific set of analyzes from the waste material before its disposal to landfill. Analyzes for inert landfill: • Sample crushing to 4 mm • Dry matter (%) • Leaching test (EN 12457-3:2002) • Total organic carbon, TOC (%w / w) • BTEX (mg / kg) • PCBs (mg / kg) • Mineral oil, C10-C40 (mg / kg) • PAHs (mg / kg) • pH • Acid neutralization capacity, ANC • Soluble metals (As, Ba, Cd, Cr, Cu, Hg, Mo, Ni, Pb, Sb, Se, Zn) (mg / kg) • Chloride, Cl (mg / kg) • Fluoride, F (mg / kg) • Sulphate, SO4 (mg / kg) • Phenol index • Dissolved organic carbon, DOC (mg / kg) • Total dissolved solids, TDS (mg / kg).
763880 €
Buy

Landfill suitability test for inert landfill (331/2013) (express delivery)

The Finnish Government Decree on Landfills (331/2013) requires the measurement of a specific set of analyzes from the waste material before its disposal to landfill. Analyzes for inert landfill: • Sample crushing to 4 mm • Dry matter (%) • Leaching test (EN 12457-3:2002) • Total organic carbon, TOC (%w / w) • BTEX (mg / kg) • PCBs (mg / kg) • Mineral oil, C10-C40 (mg / kg) • PAHs (mg / kg) • pH • Acid neutralization capacity, ANC • Soluble metals (As, Ba, Cd, Cr, Cu, Hg, Mo, Ni, Pb, Sb, Se, Zn) (mg / kg) • Chloride, Cl (mg / kg) • Fluoride, F (mg / kg) • Sulphate, SO4 (mg / kg) • Phenol index • Dissolved organic carbon, DOC (mg / kg) • Total dissolved solids, TDS (mg / kg).
1,4201,540 €
Buy

Length Weighted Geometric Mean Diameter (LWGMD) analysis

Determination of Length Weighted Geometric Mean Diameter (LWGMD) using SEM-based method adapted from EU Commission Regulation (EC) No 761/2009. Price does not include following parts: - Sampling: crushing the samples at 10 MPa - Removing organic binder at 450 °C Results include test report and SEM images.
1,5532,275 €
Buy

Light filth analysis of food sample

AOAC 960.49 A
Contaminants detected by light filth Analysis include insect fragments, animal hair, whole insects, and other extraneous material such as feather barbules, mites, metal, rubber, plastic, and paint chips.
129248 €
Ask more

Lightfastness of textiles according to EN ISO 105-B02 (up to note 6)

EN ISO 105-B02 (up to note 6)
This test determines the resistance of color of all kinds of textiles to artificial natural daylight (D65) up to note 6 of the standard.
132234 €
Ask more

Lightfastness of textiles according to EN ISO 105-B02 (up to note 7)

EN ISO 105-B02 (up to note 7)
This test determines the resistance of color of all kinds of textiles to artificial natural daylight (D65) up to note 7 of the standard.
663765 €
Ask more

Lightfastness of textiles moistened to artificial sweat

EN ISO 105-B07
This test determines the resistance of color of all kinds of textiles to the combined effect of artificial sweat and artificial daylight (D65).
192294 €
Ask more

Lignin content of biomass

Tappi T222, Tappi UM 250
Determination of acid-insoluble and acid-soluble lignin in biomass sample. A solid biomass sample is hydrolyzed and the acid-insoluble residue is filtered out to determine the amount of Klason lignin.
252368 €
Buy

Linear density of elasto-yarns and core spun yarns

Length method 53830-4
With the 53830-4 standard the linear density of single and plied elasto-yarns can be determined accorg to the short length method. The method is applicable to elasto-yarns inclug core spun yarns from elastic fibers.
75178 €
Ask more

Linear density of single and plied yarns – short length method

53830-3
With the 53830-3 standard the linear density of single and plied yarns can be determined accorg to the short length method. The method is applicable to simple yarns, plied yarns and textured yarns.
32134 €
Ask more

Linear density of threads by the rope method

EN ISO 2060
This test can be used to determine the linear density of all kinds of yarn in package form with the rope method. The method is applicable to single yarns, folded yarns and cabled yarns.
17119 €
Ask more

Linear thermal expansion of solids with rod dilatometer

ASTM E228
A dilatometer can be used to determine the linear thermal expansion of a material as a function of temperature. The temperature range of the measurement is from 25 °C to 1600 °C , but there is also an option to test in cryogenic atmosphere, which ranges from –175 °C to 300 °C.

Loop test for single and plied yarns

53843-1
The test gives the tensile strength of single and plied yarns with the loop method.
58161 €
Ask more

Luminescent bacteria test (freshly prepared bacteria)

ISO 11348-1
Inhibitory effect of water samples on the light emission of Vibrio fischeri (freshly prepared bacteria).
73180 €
Ask more

Manure & compost – basic analysis

Basic analysis for manure or compost includes analyzes listed below: • Dry matter • Total phosphorus (tot-P) • Soluble Nitrogen (NH4-N, NO3-N, org. N) • Total Nitrogen (tot-N) • Total Potassium (tot-K) Manure samples should be taken within 1 to 2 weeks of application.
129 €
Buy

Manure & compost – basic analysis + Ca, Mg, Cu, Mn, Zn

Basic analysis for manure or compost includes analyzes listed below: • Dry matter • Total Phosphorus (tot-P) • Soluble Nitrogen (NH4-N, NO3-N, org. N) • Total Nitrogen (tot-N) • Total Potassium (tot-K) • Calcium (Ca) • Magnesium (Mg) • Copper (Cu) • Manganese (Mn) • Zinc (Zn) Manure samples should be taken within 1 to 2 weeks of application.
139 €
Buy

Manure & compost – extended analysis

Standard analysis for manure/compost. Package includes analyzes listed below: • pH • Boron (B) • Calcium (Ca) • Copper (Cu) • Iron (Fe) • Magnesium (Mg) • Manganese (Mn) • Total Nitrogen (tot-N) • Soluble Nitrogen (NH4-N, NO3-N, org.
180 €
Buy

Manure & compost – extended analysis + ash

Standard analysis for manure or compost includes analyzes listed below: • pH • Boron (B) • Calcium (Ca) • Copper (Cu) • Iron (Fe) • Magnesium (Mg) • Manganese (Mn) • Total Nitrogen (tot-N) • Ammonium-Nitrogen (NH4-N) • Nitrate-Nitrogen (NO3-N) • Organic-Nitrogen (org. N) • Phosphorus (P) • Potassium (K) • Sulfur (S) • Zinc (Zn) • Soluble Salts • Moisture • Dry Matter • SAR Sodium (SAR-Na) • Ash Manure samples should be taken within 1 to 2 weeks of application.
199 €
Buy

Manure & compost – extended analysis + total carbon

Standard analysis for manure/compost. Package includes analyzes listed below: • pH • Boron (B) • Calcium (Ca) • Copper (Cu) • Iron (Fe) • Magnesium (Mg) • Manganese (Mn) • Total Nitrogen (tot-N) • Ammonium-Nitrogen (NH4-N) • Nitrate-Nitrogen (NO3-N) • Organic-Nitrogen (org.
199 €
Buy

Mass per unit area of nonwovens

EN 29073-1
A test method to determine the mass per unit area of textiles and fabrics by using small samples.
17119 €
Ask more

Mechanical dishwashing resistance of utensils

EN 12875
Method for testing the resistance of domestic articles made from ceramic, glass, glass ceramic, vitreous enamel, metal and plastics under the combined chemical, thermal and mechanical stresses of mechanical dishwashing in domestic dishwashers. It specifies a reference test method for domestic dishwashing only.
295 €
Ask more

Melting point of fibres and threads

Determination of fibre melting point using Kofler bench. The maximum test temperature is 260 °C.
58161 €
Ask more

Microplastics from textiles released by laundering

ISO/DIS 4484-1:2021-10, AATCC TM212-2021
Testing of microplastic release during laundering. Microplastics are identified and counted using FTIR-ATR and SEM-EDX.
9721,123 €
Ask more

Migration of lead and cadmium from ceramic articles intended for food contact

Migration testing of lead and cadmium from ceramic articles according to Commission Directive 2005/31/EC (amending Council Directive 84/500/EEC). This test does not cover the migration of metals from the lip and rim area of ceramic cups, mugs and etc.
158 €
Ask more

Minimum film formation temperature (MFFT)

ASTM D2354
MFFT is the lowest temperature at which a latex, emulsion or adhesive will uniformly coalesce when laid on a substrate as a thin film. An accurate MFFT value allows the formulation of products that cure correctly under specified application conditions.The measurement gives information about the minimum film formation temperature of latexes and polymer dispersions with a standardized method.
286536 €
Ask more

Moisture content in solid recycled fuels by the oven method

MSZ EN 15414-3:2011 (based on EN 14774-3)
The determination of moisture content in solid recycled fuels cointains a gravimetric measurement of the sample prior to the drying in an oven and after it. All evaporated content may not be moisture as recovered materials contain different amounts of volatile compounds.
47159 €
Buy

Moisture content of paper or board

ISO 287
Moisture content of paper or board in standard RT conditions (23 °C/ 50 % RH) can be determined with this testing method.
50110 €
Buy

Monomeric sugars in biomass based solution

Determination of free lignocellulosic monomeric sugars (glucose, mannose, galactose, rhamnose, xylose, arabinose) from the solution using ion chromatography. The results are reported as mg/ml of each monomeric sugar in the sample.
74198 €
Ask more

Nano scratch test of thin films

Nano Scratch Test of thin film samples. Typical measurement includes overview image of the scratch track (surface damage) and determination of critical load values (Lc1, Lc2, Lc3).
429566 €
Buy

NH3 and H2O from biogas or natural gas

Ammonia (NH3) and water (H2O) content from biogas or natural gas sample NOTE: requires fast delivery! Delivery should be organized right after sampling!.
836943 €
Ask more

Number of stitches per unit length and unit area in textiles

EN 14971
The method gives the number of stitches per unit length and unit area in most knitted fabrics.
17119 €
Ask more

Number of threads per unit length of textiles

EN 1049-2
This test is a modification of the ISO 7211-2 standard and it gives the number of threads per unit length of textile woven fabrics.
33136 €
Ask more

Nutritional analysis from food samples (EU 1169/2911)

Regulation EU 1169/2011
The nutritional content should appear on the label of almost every packaged food. Food Information Regulation 1169/2011 defines what information must appear on the label.
220289 €
Buy

Nutritional analysis of pet food

Nutritional analysis of compound feed or complementary feed intended for cats, dogs, and other furry animals according to the Commission Regulation (EU) 2017/2279: • Crude protein • Crude fat • Crude ash • Crude fibre • Moisture.
99 €
Buy

Oil and greases from water sample

SFS 3010 (modif.)
Determination of oil and grease content of a water sample by the method SFS 3010 (mod.). The oil and grease content of the sample is expressed in unit mg/l.
71179 €
Ask more

Oil repellency of textiles + hydrocarbon resistance test

AA TCC-Test 118
This test is used to give indication about textile's oil stain resistance, more specifically its resistance to wetting by hydrocarbons. In this test a series of selected liquid hydrocarbons with different surface tensions are used and the result is given as a numerical value, high values indicating better oil resistance.
30133 €
Ask more

Oil resistance of textiles

EN ISO 14419
This test is used to give indication about textile's oil stain resistance, more specifically its resistance to wetting by hydrocarbons. In this test a series of selected liquid hydrocarbons with different surface tensions are used and the result is given as a numerical value, high values indicating better oil resistance.
30133 €
Ask more

Opacity of paper or board

ISO 2471
This method describes the determination of the opacity (paper backing) of paper by diffuse reflectance. It can be used to determine the opacity of papers or boards which contain fluorescent whitening agents, provided the UV content of the radiation incident on the test piece has been adjusted to conform to that in the CIE illuminant C using a fluorescent reference standard provided by an ISO/TC 6 authorized laboratory as described in in the ISO 2470‑1.
57157 €
Buy

Optical brightness of textiles with UV light

This test is used to detect optical brighteners with an UV light accorg to an inhouse method.
25128 €
Ask more

Osmolality measurement

Ph.Eur. 2.2.35:2011
Determination of osmolality from liquid samples using a freezing point osmometer. Osmolality defines the number of osmols per kilogram of liquid.
97208 €
Buy

Osmolarity measurement

Ph.Eur. 2.2.35:2011
Determination of osmolarity of liquid samples using a freezing point osmometer. Osmolarity defines the number of osmols per liter of liquid.
97208 €
Buy

Overall migration testing – simulant A (10 % EtOH)

EN 1186
The overall migration (OM) is the sum of all the compounds that might migrate from the FCM into food. According to Regulation (EU) No 10/2011 Food simulants A, B and C are assigned for foods that have a hydrophilic character and are able to extract hydrophilic substances.
147 €
Ask more

Overall migration testing – simulant A (10 % EtOH), repeated use

EN 1186
The overall migration (OM) is the sum of all the compounds that might migrate from the FCM into food. According to Regulation (EU) No 10/2011 food simulants A, B, and C, are assigned for foods that have a hydrophilic character and are able to extract hydrophilic substances.
395 €
Ask more

Overall migration testing – simulant A, B, D2 (all foodstuff)

EN 1186
According to Regulation (EU) No 10/2011 materials and articles intended for contact with all types of food shall be tested with food simulant A, B and D2.
690 €
Ask more

Overall migration testing – simulant A, B, D2 (all foodstuff), repeated use

EN 1186
According to Regulation (EU) No 10/2011 materials and articles intended for contact with all types of food shall be tested with food simulants A, B, and D2. With aqueous simulants, compliancy for repeated use will be tested by measuring overall migration three consecutive times from the same test item.
1,983 €
Ask more

Overall migration testing – simulant B (3 % AcOH)

EN 1186
The overall migration (OM) is the sum of all the compounds that might migrate from the FCM into food. According to Regulation (EU) No 10/2011 food simulants A, B and C are assigned for foods that have a hydrophilic character and are able to extract hydrophilic substances.
147 €
Ask more

Overall migration testing – simulant B (3 % AcOH), repeated use

EN 1186
The overall migration limit (OML) is the sum of all the compounds that might migrate from the FCM into food. According to Regulation (EU) No 10/2011 food simulants A, B and C are assigned for foods that have a hydrophilic character and are able to extract hydrophilic substances.
395 €
Ask more

Overall migration testing – simulant C (20 % EtOH)

EN 1186
According to Regulation (EU) No 10/2011 food simulant C shall be used for alcoholic foods with an alcohol content of up to 20 % and those foods which contain a relevant amount of organic ingredients that render the food more lipophilic.
147 €
Ask more

Overall migration testing – simulant C (20 % EtOH), repeated use

EN 1186
According to Regulation (EU) No 10/2011 food simulant C shall be used for alcoholic foods with an alcohol content of up to 20 % and those foods which contain a relevant amount of organic ingredients that render the food more lipophilic.
395 €
Ask more

Overall migration testing – simulant D1 (50 % EtOH)

EN 1186
According to Regulation (EU) No 10/2011 food simulants D1 and D2 are assigned for foods that have a lipophilic character and are able to extract lipophilic substances. Food simulant D1 shall be used for alcoholic foods with an alcohol content of above 20 % and for oil in water emulsions.
147 €
Ask more

Overall migration testing – simulant D1 (50 % EtOH), repeated use

EN 1186
According to Regulation (EU) No 10/2011 food simulants D1 and D2 are assigned for foods that have a lipophilic character and are able to extract lipophilic substances. Food simulant D1 shall be used for alcoholic foods with an alcohol content of above 20 % and for oil in water emulsions.
395 €
Ask more

Overall migration testing – simulant D2 (olive oil)

EN 1186
The overall migration limit (OML) is the sum of all the compounds that might migrate from the FCM into food. According to Regulation (EU) No 10/2011 food simulants D1 and D2 are assigned for foods that have a lipophilic character and are able to extract lipophilic substances.
397 €
Ask more

Overall migration testing – simulant D2 (olive oil), repeated use

EN 1186
The overall migration limit (OML) is the sum of all the compounds that might migrate from the FCM into food. According to Regulation (EU) No 10/2011 food simulants D1 and D2 are assigned for foods that have a lipophilic character and are able to extract lipophilic substances.
1,384 €
Ask more

Overall migration testing – simulant E (Tenax)

According to Regulation (EU) No 10/2011 food simulant E is assigned for testing specific migration into dry foods.
245 €
Ask more

Oxygen transmission rate (OTR) of films and sheetings

ASTM D3985-17; ASTM F 1927-20
Determination of the oxygen transmission rate through films and sheet-like materials. The measurement is done on two parallel samples simultaneously.
286403 €
Buy

Oxygen transmission rate (OTR) of packages

ASTM F1307-2014
This test is designed to measure the oxygen transmission rate of readily formed packages such as cups, bottles, trays, and containers. The test is done with three replica measurements.
693810 €
Buy

PAH analysis from asphalt

US EPA 8270D, US EPA 8082A, CSN EN 15527, ISO 18287, ISO 10382, CSN EN 17322
Determination of PAH compounds in asphalt samples by GC-MS technique. The analysis includes the determination of the following compounds: • naphthalene • acenaphthylene • acenaphthene • fluorene • phenanthrene • anthracene • fluoranthene • pyrene • benzo (a) anthracene • chrysene • benzo (b) fluoranthene • benzo (k) fluoranthene • benzo (a) pyrene • dibenzo (ah) anthracene • benzo (ghi) perylene • indeno (123cd) pyrene • PAH 16, sum Results are reported in unit mg / kg.
95190 €
Buy

PAH analysis from asphalt (express delivery)

US EPA 8270D, US EPA 8082A, CSN EN 15527, ISO 18287, ISO 10382, CSN EN 17322
Determination of PAH compounds in asphalt samples by GC-MS technique with express delivery time for the results. The analysis includes the determination of the following compounds: • naphthalene • acenaphthylene • acenaphthene • fluorene • phenanthrene • anthracene • fluoranthene • pyrene • benzo (a) anthracene • chrysene • benzo (b) fluoranthene • benzo (k) fluoranthene • benzo (a) pyrene • dibenzo (ah) anthracene • benzo (ghi) perylene • indeno (123cd) pyrene • PAH 16, sum Results are reported in unit mg / kg.
142285 €
Buy

Particle analysis from gas

Quantity and elemental analysis for particles in gas.
291399 €
Ask more

Particle size analysis for soil sample

The analysis determines the amount (%) of sand, silt and clay in the soil sample and evaluates the texture class for the soil sample.
83159 €
Ask more

Particle size analysis with SEM

Determining the particle size distribution of a powder using scanning electron microscope (SEM). As a result images and the determined particle size distribution from 100 different particles are delivered.
457679 €
Ask more

Particle size distribution by laser diffraction (aqueous samples)

Determination of particle size distribution (PSD) by Laser Diffraction (LD). Analysis can be done from aqueous dispersions or solid samples that can be dispersed in water.
201338 €
Buy

Particle size distribution by laser diffraction (non-aqueous samples)

Determination of particle size distribution (PSD) by Laser Diffraction (LD). Analysis can be done from dispersions in organic solvents or solid samples that can be dispersed in organic solvent.
257398 €
Buy

Particle size distribution by laser diffraction (solid samples)

Determination of particle size distribution (PSD) by Laser Diffraction (LD). Analysis is performed from solid samples.
143281 €
Buy

Particles size and shape analysis with image analyzer

Particle size distribution (PSD) and shape of the particles is determined using image analysis. Image analysis characterizes particles shape such as fibers, rods, and crystals that can not be characterized meaningfully with traditional optical devices such as laser diffraction.
338440 €
Buy

Pentachlorophenol in a cold water extract of paper and board

ISO 15320
Pentachlorophenol is a compound that is used as a pesticide and a wood preservative. This analysis is used to determine the content of pentachlorophenol in an aqueous extract in pulp, paper and board.
299 €
Ask more

Permanent bend strength of textiles by flexometer method

EN ISO 32100
This test is used for rubber or plastic-coated fabrics to determine their flex resistance in the folded condition. The appearance of the test specimen after a specified number of flex cycles is taken as a measure of the flex resistance in the folded condition.
58161 €
Ask more

Pesticides from food

Determination of selected pesticides using GC-MS and HPLC-MS techniques. The analysis includes the determination of the following compounds: GC-MS: • Aldrin • α-BHC, β-BHC, γ-BHC, δ-BHC • 2.4 DDT • 4.4 DDT • Dieldrin • Endrin • Fenitrothion • Profenophos HPLC-MS: • Acetochlor • Carbaryl • Chlorpyriphos • Diazinone • Imidacloprid • Malathion • Triazophos • Paraquat.
177294 €
Buy

pH of aqueous extracts in cold or hot water of paper, board or pulp

PN-84/P-50109 eqv ISO 6588:1981)
With this test, the pH of water extraction (hot or cold) from a paper, board or pulp sample is measured. The extraction is performed with deionized water, therefore the results may vary slightly from samples that are taken in mill process conditions.
71171 €
Buy

Phthalates from plastic material

Determination of phthalates by GC-MS tecnique. The analysis include compounds listed in below: • Dibutyl phthalate (DBP) • Butyl benzyl phthalate (BBP) • Di(n-octyl) phthalate (DNOP) • Di(2-ethylhexyl) phthalate (DEHP) • Diisodecyl phthalate (DIDP) • Diisononyl phthalate (DINP) • Dicyclohexyl phthalate (DCHP) • Diphenyl phthalate (DPhP) • Di(n-hexyl) phthalate (DNHP) • Phthalic anhydride • Diallyl phthalate (DAP) • Dimethyl phthalate (DMP) • Diisobutyl phthalate (DIBP) • diethyl phthalate (DEP) • Diamyl phthalate (DPP) • N-pentyl-isopentylphtalate • 1,2-benzenedicarboxylic acid, di C7-11 branched and linear alkyl esters (DHNUP) • Di-2-n-butoxyethyl phthalate • Cyclic oligomers of (butylene terephthalate) • Tricyclodecanedimethanol bis(hexahydrophthalate) • 1,2-benzenedicarboxylic acid, di C6-8 branched alkyl esters C7-rich (DIHP) • Diizopentyl phthalate (DIPP) • Dipropyl phthalate (DPP2) • N-pentyl-isopentyl phthalate (PIPP) • Dimethylglycol phthalate (DMEP) • Dibenzyl phthalate (DBP2) • Hexyl-2-ethylhexyl phthalate (HEHP) • Butyl Octyl phthalate (BOP) • Dinonyl phthalate (DNP) • Di(2-ethoxyethyl) phthalate (DEEP) • Dioctyl terephthalate (DOTP) • Diisohexyl phthalate (DMPP) • 1,2-benzenedicarboxylic acid, dihexyl ester, branched and linear.
410548 €
Buy

Pilling test for textiles

EN ISO 12947-3
Determines the fabric's tendency to fuzz, lint and pill with the Martindale or box method.
65168 €
Ask more

Pin adhesion test (PAT) of corrugated cardboard

Pin adhesion test measures the bond strength between the corrugated medium and the liner. On request the measurement can be done on double walled and triple walled corrugated cardboard.
192299 €
Ask more

Plastic identification with FTIR

FTIR (fourier transform infra-red) analysis can be used to identify functional chemical groups in polymers. From this analysis you will receive the FTIR-spectra of your sample and an expert assessment of the polymers in the sample.
120200 €
Ask more

Plastic's and composite's flexural properties with three point bending

ISO 178
Determination of flexural properties of rigid or semirigid plastic or composite material using three point bending measurements according to ISO 178. From this test you will obtain the following parameters: Conventional deflection Flexural Modulus Flexural strength at conventional deflection Flexural strength Flexural strength at break Bending at conventional deflection Bending at break The test is done at 100 mm/min as per ISO 178.
143250 €
Ask more

Polycyclic aromatic hydrocarbon (PAH) analysis from solid and fabric materials

GC-MS analysis of 16 PAH compounds, which are listed as high priority pollutants by ES EPA. The analyzed PAH compounds are: naphthalene, acenaphthylene, acenaphthene, fluorene, phenanthrene, anthracene, fluoranthene, pyrene, benzo[a]anthracene, chrysene, benzo[b]fluoranthene, benzo[k]fluoranthene, benzo[a]pyrene, benzo[ghi]perylene, indeno[1,2,3-c,d]pyrene and dibenz[a,h]anthracene.
148235 €
Ask more

Polycyclic aromatic hydrocarbon (PAH) analysis from water samples

ČSN 75 7554
Chromatographic analysis of 16 PAH compounds, which are listed as high priority pollutants by ES EPA. The analyzed PAH compounds are: naphthalene, acenaphthylene, acenaphthene, fluorene, phenanthrene, anthracene, fluoranthene, pyrene, benzo[a]anthracene, chrysene, benzo[b]fluoranthene, benzo[k]fluoranthene, benzo[a]pyrene, benzo[ghi]perylene, indeno[1,2,3-c,d]pyrene and dibenz[a,h]anthracene.
261374 €
Buy

Powder XRD measurement

Phase identification of the crystalline powder material using x-ray diffraction (XRD). The analysis can also provide unit cell dimensions.
254371 €
Buy

Printing ink set off testing with ethanol solution; analysis with GC-MS

EN 13130-1
Printing ink set-off can occur on the reverse side of printed labels, lids, cups and packaging film, either in a stack, or in the reel after printing. This creates a potential that low molecular weight substances could be transferred to the unprinted surface of the packaging that makes contact with the packed contents.
550 €
Ask more

Printing ink set off testing with food simulant E (Tenax); analysis with GC-MS

EN 13130-1
Printing ink set-off can occur on the reverse side of printed labels, lids, cups and packaging film, either in a stack, or in the reel after printing. This creates a potential that low molecular weight substances could be transferred to the unprinted surface of the packaging that makes contact with the packed contents.
690 €
Ask more

Puncture resistance of corrugated cardboard

ISO 3036:1975
In the puncture test a pyramid puncture head is used to measure the puncture resistance of the board sample. During this process, combined tensile, compression, flexural and shear forces occur.
80110 €
Buy

Puncture resistance of rigid plastics

EN ISO 6603-2 or ASTM D3763
This test is used to determine the puncture properties of rigid plastics. During the test a flat specimen is punctured by a falling impact (from 1 m at a speed of 4.4 m/s) specimen at a standard speed while force and deflection are measured.
214332 €
Buy

Purity assay for solvent sample (GC-FID and Karl Fischer)

Solvent purity assay with GC-FID and Karl Fischer techniques. Determination is performed by analyzing the sample with GC-FID and comparing the area of the solvent signal to the combined area of all peaks.
251411 €
Ask more

Purity assay for solvent sample (GC-FID)

Solvent purity assay with GC-FID technique. Determination is performed by analyzing the sample with GC-FID and comparing the area of the solvent signal to the combined area of all peaks.
211365 €
Ask more

Purity assay for solvent sample (GC-FID, Karl Fischer and ICP-MS)

Determination of solvent purity by GC-FID technique and Karl Fischer titration and metal screening of the sample with ICP-MS technique. Solvent purity assay with GC-FID and Karl Fischer techniques.
537697 €
Ask more

Pyriproxyfen concentration from food sample

The measurement uses the QuEChERS sample preparation method and HPLC-MS analysis to accurately determine the pyriproxyfen concentration in your sample. The result will be given as µg / l or mg / kg depending on whether your sample is liquid or solid.
121182 €
Ask more

Radiocarbon dating

Radiocarbon dating is a destructive method for analyzing the age of biological and organic materials such as fossils and very old objects. Some carbon containing inorganic samples can be analysed as well.
398508 €
Ask more

Raft strength test of alginate oral suspensions

British Pharmacopoeia
British Pharmacopoeia standard measurement for alginate raft-forming oral suspension's raft strength.
429566 €
Ask more

RBS measurement (express delivery)

Determination of the elemental composition (ratio of the elements) using RBS (Rutherford Backscattering Spectrometry). Also depth profiles of the sample surfaces can be determined using RBS.
8291,281 €
Buy

RBS measurement (normal delivery)

Determination of the elemental composition (ratio of the elements) using RBS (Rutherford Backscattering Spectrometry). Also depth profiles of the sample surfaces can be determined using RBS.
372481 €
Buy

Recovery test for concrete or brick with materials distribution, impurities and floating impurities (843/2017)

The Finnish Government Decree on the Recovery of Certain Wastes in Earth Construction (843/2017) is specifying the conditions within which the use of certain waste in earth construction does not require an environmental permit in accordance with the Environmental Protection Act (527/2014). This requires the measurement of a specific set of analyzes from the waste material.
725833 €
Buy

Recovery test for concrete or brick with materials distribution, impurities and floating impurities (843/2017) (express delivery)

The Finnish Government Decree on the Recovery of Certain Wastes in Earth Construction (843/2017) is specifying the conditions within which the use of certain waste in earth construction does not require an environmental permit in accordance with the Environmental Protection Act (527/2014). This requires the measurement of a specific set of analyzes from the waste material.
1,2861,393 €
Buy

Recovery test for pure concrete or pure brick (843/2017)

The Finnish Government Decree on the Recovery of Certain Wastes in Earth Construction (843/2017) is specifying the conditions within which the use of certain waste in earth construction does not require an environmental permit in accordance with the Environmental Protection Act (527/2014). This requires the measurement of a specific set of analyzes from the waste material.
445995 €
Ask more

Recovery test for pure concrete or pure brick (843/2017) (express delivery)

The Finnish Government Decree on the Recovery of Certain Wastes in Earth Construction (843/2017) is specifying the conditions within which the use of certain waste in earth construction does not require an environmental permit in accordance with the Environmental Protection Act (527/2014). This requires the measurement of a specific set of analyzes from the waste material.
888995 €
Ask more

Reducing sugars from feedstock with Luff–Schroorl method

Determination of reducing sugar content, expressed as glucose, from food and feed with Luff–Schroorl titration method.
169289 €
Ask more

Resin acids from water

Determination of resin acids in a water sample by GC-FID technique. Determination normally includes identification of following compounds: • 13-B-7,9 (11) -abietic acid • 7, 9 (11) -abietic acid • 8,15-isopimaradiene-18-acid • Abietic acid • Abieth-8,12-diene-18-acid • Dehydroabietic acid • Diabetic acid • Neoabietic acid • Palustric acid • Pimaric acid • Sandarakoparic acid • Other resin acids • Resin acids, sum Sometimes the list to be reported may vary slightly depending on the sample.
360479 €
Buy

Respirable dust

The measurement determines the amount of respirable dust present in indoor air. The sample is collected using a sample collector and pump.
86304 €
Buy

Restricted substances in metallic jewelry and watches

Testing for harmful substances in metal jewelery and watches according to the requirements of REACH Regulation (EC) No 1907/2006. The test package includes the following tests: • Transfer of nickel from jewelry or watches to the human body.
348456 €
Ask more

Ring crush test of liners

ISO 12192:2002
This test is used to evaluate the compressive strength of paper and board by using the ring crush method. This test is especially useful in determining the suitability of shipping containers made from fibreboard.
86186 €
Buy

Roughness of paper or board

bendtsen, PPS or BEKK ISO 8791-2, ISO 8791-4 or ISO 5627
Multiple methods to determine paper's and board's roughness exist. The most typical tests are: The Bendtsen method (ISO 8791-2) - For papers/boards that have Bendtsen value between 5 to 3000 ml/min.
107207 €
Buy

Rubber abrasion resistance

ISO 4649 method A
The method involves determination of the volume loss due to the abrasive action of rubbing a test piece over a specified grade of abrasive sheet. This method (method A) is for a non-rotating test piece.
357465 €
Ask more

Salicin content from wood extract

Salicin content measurement from biomass or wood based extract sample.
98208 €
Ask more

Salicylic acid from wood extract

Salicylic acid content measurement from biomass or wood based extract sample.
98208 €
Ask more

Salt content (based on Na concentration) from food sample

Determination of sodium (Na) concentration ICP-MS-technique and calculating the salt content on the basis of Na content of sample.
37135 €
Ask more

Sand sieve analysis

In sieve analysis, the grain size of a sample is determined using seven different sized sieves. The results show the percentages of the following grain size fractions in the sample: • 2 mm and larger • 2 – 1 mm • 1 – 0.5 mm • 0.5 – 0.25 mm • 0.25 – 0.1 mm • 0.1 – 0.05 mm • Less than 0.05 mm.
83159 €
Ask more

Scott bond internal strength of paper or board

TAPPI 569 om-09
With this test, the energy required to rapidly delaminate a sheet-type specimen is measured. The z-directional rupture is initiated by the impact of a pendulum having both a controlled mass and a controlled velocity.
114214 €
Buy

Scratch test ASTM 1624

ASTM C1624
Scratch Test according to ASTM C1624. Typical measurement includes overview images of the surface damages and critical loads (Lc1, Lc2, Lc3).
786897 €
Buy

Screening analysis for volatile organic compounds in gas

Screening of Volatile organic compounds (VOC) incl. siloxanes, terpenes, ketones, furans, hydrocarbons (C6-C14) in biogas or natural gas.
1,2361,343 €
Ask more

SCT from paper or board

ISO 9895
SCT (short span compression test) is one of the most commonly used testing methods in determining paper's and cartonboard's compressional strength. In this test, the sample is conditioned in standard conditions (23 °C / 50 % RH), after which the SCT is measured in machine direction (MD) and in cross direction (CD).
71110 €
Buy

Seam slippage resistance of textiles

EN ISO 13936-2
Determination of the resistance of thread systems of woven fabrics to slippage at a sewn seam. This method is suitable for all upholstery and apparel fabrics and stretch fabrics.
82184 €
Ask more

Seam tensile properties of textile products

EN ISO 13935-1 or EN ISO 13935-2
Determines the strength of straight seams in fabrics and apparel when a force is applied perpendicular to the seam. The method is applicable to most fabrics, but typically not for geotextiles, coated textiles, nonwovens, textile-glass woven fabrics and fabrics made from carbon fibres.
82184 €
Ask more

Seaweed based sugars in solution

Analyzing sugar content of seaweed based solution samples. First free monomeric sugarcomponents are determined from the solution using ion chromatograph.
429531 €
Ask more

Seaweed carbohydrate analysis

Analyzing carbohydrate content of seaweed based samples. Solid sample is hydrolyzed, acid insoluble residue is filtered out and the monosugar components are analysed using ion chromatography.
536623 €
Ask more

Seaweed iodine content

Iodine measurement from solid seaweed samples.
46154 €
Ask more

Seaweed pigments in solution

Measuring the content of seaweed based pigments in a solution using ion chromatography. The analysed compounds are chlorophyll a, chlorophyll b, chlorophyll c, fucoxanthin, astaxanthin, lutein, β-carotene and antheraxanthin.
214313 €
Ask more

SEC-MALS of high molar weight polymers

ISO 13885-1
SEC-MALS (size exclusion chromatography - multi-angle light scattering) is a polymer analysis method that is used to characterize molar masses and branching properties of polymers. This analysis gives information about high molecular weight polymer's mass average molar mass Mw, numeric-average molar mass Mn, it's polydispersity index PDI and information about branching.
7002,250 €
Ask more

Secondary ion mass spectrometry (SIMS)

Secondary Ion Mass Spectrometry (SIMS) is a quantitative method to determine the concentration depth profiles of the elements. SIMS can be used for a wide variety of solid-state sample types.

SEM imaging of surfaces

Imaging of the sample with scanning electron microscope (SEM). In a typical measurement, several images with varying magnifications are taken to get a good overall view of the sample surface.
201313 €
Buy

SEM-EDX imaging of surfaces

Imaging of the sample using scanning electron microscope (SEM) with energy-dispersive X-ray spectroscopy (EDX, EDS) . In a typical measurement, several images with varying magnifications are taken to get a good overall view of the sample surface.
297408 €
Buy

Sensory analysis – odour and flavour (DIN 10955)

DIN 10955
The standard specifies test methods for the sensory analysis of packaging materials which are intended for direct food contact.
147 €
Ask more

Sensory analysis – odour and flavour (EN 1230-1 and -2)

EN 1230-1 and -2
This European Standard specifies the test method for assessment of the odour and flavour released by a paper or board sample. It is applicable to all kinds of paper and board, including coated and/or printed material, intended to come into direct or indirect contact with foodstuffs.
147 €
Ask more

Shelf life test for beverages

The three-point shelf life test includes the following microbiological analyses: • Aerobic microorganisms 30 ° C • E. Coli • Yeasts and molds • Salmonella The analyzes are performed at the beginning, middle and at the end of the estimated shelf life.
200378 €
Buy

Shelf life test for prepared meals

The three-point shelf life test includes the following microbiological analyzes: • Aerobic microorganisms 30 °C • Enterobacteria • Bacillus Cereus (preliminary) • Yeasts and molds The analyzes are performed at the beginning, middle and at the end of the estimated shelf life. The price of the analysis includes three measurements.
320495 €
Buy

Siloxanes from biogas or natural gas

ASTM D8230
Biogas or natural gas analysis for Hexamethyltrisiloxane (D3), octamethylcyclotetrasiloxane (D4), Decamethylcyclopentasiloxane (D5), Dodecamethylcyclohexasiloxane (D6), Hexamethyldisiloxane (L2), Octamethyltrisiloxane (L3), Decamethyltetrasiloxane (L4), Dodecamethylpentasiloxane (L5), Trimethylsilanol (SiOH).
661809 €
Buy

Simulated distillation of petroleum fractions (Simdist, Simdis)

ASTM D2887
The method includes the determination of boiling point of petroleum fractions. Sample needs to have boiling range between 55.5 - 750 °C and sufficiently low vapour pressure to allow sample preparation at room temperature.
326483 €
Buy

Single-end breaking force & elongation at break of fibres and threads

EN ISO 2062
This test gives the breaking force and elongation at break of textile yarns according to ISO 2062 standard. During the test, a constant extension rate is used.
63166 €
Ask more

Smoothness of paper with Bekk method

ISO 5627
Measures smoothness of paper or board sample with the Bekk method. This method is recommended with especially smooth grades and is not recommended for samples over 0.5 mm thickness or very permeable samples.
80128 €
Buy

Sodium chlorate (NaClO3) from water based liquid sample (computational)

Computational determination of NaClO3 content from liquid. Sodium chlorate concentration of the sample is calculated from the ClO3 content which is measured with using ion chromatograph (IC) technique.
70176 €
Buy

Sodium chlorate (NaClO3), chlorate (ClO3) and chlorite (ClO2) from water based liquid sample (computational)

Determination of NaClO3, ClO3 and ClO2 content from liquid. Contents of chlorate and chlorite are measured with using ion chromatograph (IC) technique.
97209 €
Ask more

Specific migration testing of any limited compound listed in Annex I of Commission Regulation (EU) No 10/2011

EN 13130-1
We offer specific migration testing for almost all the compounds listed in Commission Regulation (EU) No 10/2011 Annex I. Price and turnaround time depend on the tested substance.

Specific migration testing – 1,3-butadiene [CAS 106-99-0; Ref No 13630; FCM 223]

EN 13130-1
Specific migration of 1,3-butadiene from a plastic food contact material. The compound is listed under FCM 223 in Annex I of European Regulation No 2011/10.
274 €
Ask more

Specific migration testing – elements of Annex II in Commission Regulation (EU) No 10/2011

EN 1186
Specific migration of elements listed in Annex II of Commission Regulation (EU) 2020/1245 of 2 September 2020 amending and correcting Regulation (EU) No 10/2011. The test covers the following elements or parameters: • Lithium (Li) • Sodium (Na) • Magnesium (Mg) • Aluminum (Al) • Potassium (K) • Calcium (Ca) • Chromium (Cr) • Manganese (Mn) • Iron (Fe) • Cobalt (Co) • Nickel (Ni) • Copper (Cu) • Zinc (Zn) • Arsenic (As) • Cadmium (Cd) • Antimony (Sb) • Barium (Ba) • Lanthanum (La) • Europium (Eu) • Gadolinium (Gd) • Terbium (Tb) • Mercury (Hg) • Lead (Pb) • Sum of lanthanide – Eu, Gd, La, Tb.
326 €
Ask more

Specific migration testing – formaldehyde [CAS 50-00-0; Ref No 17260/54880; FCM 98]

EN 13130-1
Specific migration of formaldehyde from a plastic food contact material. The compound is listed under FCM 98 in Annex I of European Regulation No 2011/10.
128 €
Ask more

Specific migration testing – non-intentionally added substances (NIAS), GC-MS, simulant D2e (95% EtOH)

EN 1186
Analysis of non-intentionally added substances (NIAS), which are chemicals that are present in a food contact material (FCM) or food contact article (FCA) but have not been added for a technical reason during the production process. NIAS have various sources and can be grouped into side products, breakdown products, and contaminants.
497 €
Ask more

Specific migration testing – non-intentionally added substances (NIAS), GC-MS, simulant E (Tenax)

EN 1186
Analysis of non-intentionally added substances (NIAS), which are chemicals that are present in a food contact material (FCM) or food contact article (FCA) but have not been added for a technical reason during the production process. NIAS have various sources and can be grouped into side products, breakdown products, and contaminants.
697 €
Ask more

Specific migration testing – non-intentionally added substances (NIAS), LC-QTOF-MS, simulant D2e (95% EtOH)

EN 1186
Analysis of non-intentionally added substances (NIAS), which are chemicals that are present in a food contact material (FCM) or food contact article (FCA) but have not been added for a technical reason during the production process. NIAS have various sources and can be grouped into side products, breakdown products, and contaminants.
570 €
Ask more

Specific migration testing – poly((R)-3-hydroxybutyrate-co-(R)-3-hydroxyhexanoate) (PHBH) [CAS 147398-31-0; FCM 1059]

EN 13130-1
Specific migration of poly((R)-3-hydroxybutyrate-co-(R)-3-hydroxyhexanoate) (PHBH) from a plastic food contact material. The compound is listed under FCM 1059 in Annex I of European Regulation No 2011/10.
2,687 €
Ask more

Specific surface area + pore size analysis (BET)

BET (Brunauer–Emmett–Teller) analysis to determine specific surface area and pore size of solid materials.
250368 €
Buy

Specimen mass loss after the Martindale abrasion test

Determines the mass loss of specimens that have undergone the Martindale abrasion resistance test. The test is applicable to all uncoated fabrics.
134235 €
Ask more

Surface energy determination

Surface energy determination using contact angle measurements with deionized water, diiodomethane and ethylene glycol as wetting liquids. Total surface energies and their polar and dispersive components are determined.
288451 €
Ask more

Tear strength of textiles

DIN EN ISO 13937-3, DIN 53859-5, DIN EN ISO 13937-4, DIN 53363, DIN 53356, DIN EN ISO 4674-1 Process A, ASTM D 2261 - 96, DIN EN ISO 9073-4, AS 2001.2.10, DIN 53354, DIN EN ISO 13934-1, DIN EN ISO 13934-2, DIN EN ISO 1421
Tensile properties and elongaton at break of textiles can be determined with variety of standards depending on the sample type. Tear strength can be used to evaluate the strength characteristics of any textile product.
75183 €
Ask more

Tearing resistance of paper

EN ISO 1974
This method determines the out of plane tearing resistance of paper or boards of low grammage with the Elmendorf method. The result is given in newtons (N).
93193 €
Buy

TEM imaging

Imaging of the sample with transmission electron microscope (TEM). In typical measurement, several images with varying magnifications are taken to get a good overall view of the sample.
689889 €
Buy

TEM imaging + EDX

Imaging of the sample with transmission electron microscope (TEM) and determination of the elemental composition of the sample using electron dispersive X-ray spectroscopy (EDX). In typical measurement, several images with varying magnifications are taken to get a good overall view of the sample.
1,0041,204 €
Buy

Tensile strength (TEA) of paper and paperboard

ISO 1924-2, ISO 1924-3
Physical properties of paper goods should be able function as they are inteded. Small variations in the paper/paperboard can affect the mechanical properties of the product.
70110 €
Buy

Tensile test for fibre reinforced composites, ISO 527-4/5

EN ISO 527-4, EN ISO 527-5
This method is used to study tensile properties of isotropic and orthotropic fibre-reinforced plastic composites according to ISO 527-4 standard.
84260 €
Buy

Tensile test for metals at room temperature

ISO 6892-1
With tensile testing, strength properties of metals and metal extrusion products can be determined. Properties that are deducted from the testing data are eg.
125233 €
Buy

Tensile test of rigid plastics

EN ISO 527-1,2
Tensile test for moulded, such as injection moulded, plastics at room temperature. The test characterises the tensile modulus, yield point and point of break with the standard method EN ISO 527-2.
100208 €
Buy

Textile's resistance to surface wetting with spray test by AATCC 22

AATCC 22
This test indicates the textiles resistance to surface wetting by water. This test can be used for any type of textile or fabric to study surface wetting.
32134 €
Ask more

Textile's resistance to surface wetting with spray test by EN ISO 4920

EN ISO 4920
This test indicates the textiles resistance to surface wetting by water. This test can be used for any type of textile or fabric to study surface wetting.
32134 €
Ask more

Textile's resistance to water penetration

EN 20811 (up to 2.000 mbar)
This method determines the resistance of fabrics to penetration by water with the hydrostatic pressure method. The method is primarily intended for dense fabrics.
82184 €
Ask more

TGA-IR analysis

TGA (Thermogravimetric Analysis) coupled with an IR (Infra-Red) sensor allows identification of gases formed during TGA analysis. In addition to the mass loss curve from TGA, this method will allow identification of volatiles, decompositon and gaseous reaction products.
277387 €
Ask more

Thermal characterization with DSC

ISO 11357-1
Differential Scanning Calorimetry (DSC) can be used to determine transition temperatures and enthalpy changes of solid and liquid samples under controlled temperature changes. Typical research topics are transition temperatures (melting, crystallization, glass transition temperature) and their enthalpies, material's amorphic and crystalline behaviour, hardening and specific heat, material compatibility and the effect of additives.
196298 €
Buy

Thermogravimetric analysis TGA

DIN 51006 2005-07, ISO 11358-1
Thermogravimetry (TGA) is an analysis method where the sample is heated at a controlled rate, or kept at a controlled temperature, while its mass is weighed with an extremely precise scale. TGA may give information about phase transitions, absorption, adsorption, desorption, chemisorption, thermal decomposition, and solid-gas reactions.
196298 €
Buy

Thickness of textile products

EN ISO 5084
The method can be used to determine the thickness of textile products under specified pressure. The test is not applicable to textile floor coverings, geotextiles, nonwovens or coated fabrics.
17119 €
Ask more

Time-of-flight secondary ion mass spectrometry (ToF-SIMS)

Time of Flight- Secondary Ion Mass Spectrometry (ToF-SIMS) is an analytical technique that provides information about the surfaces of solid materials. It can be used for elemental and molecular analysis and surface mapping of a wide variety of solid-state sample types.

ToF-ERDA measurement

Tof-ERDA measurement for thin films. Results include elemental composition (atomic-%), total content (1E15 at/cm2), and depth profiles (concentration as a function of depth) of the measured layer.
476593 €
Buy

Toluene and xylenes

EPA 8015C, EPA 8260 D
Determination of toluene and xylenes in solid or liquid samples. Xylene is analyzed as total xylene, i.e.
86194 €
Buy

Total chlorine from solid samples

DIN 51727
Determination of total chlorine in solid samples according to DIN 51727. The sample is pretreated by burning it calorimetrically, after which the concentration of chlorine is analyzed by LC technique.
250320 €
Buy

Total fluorine from solid samples

DIN 51723
Determination of total fluorine in solid samples according to DIN 51723. The sample is pretreated by burning it in an oxygen bomb, after which the concentration of fluorine is analyzed by ion chromatography (IC).
195328 €
Buy

Total moisture content of solid recovered fuel

CEN/TS 15414-1:2010
The method is used to determine the total moisture of recovered solid fuel sample dried in an oven. The method is applicable to all recovered solid fuels.
83179 €
Buy

Total nitrogen (N-tot) from water sample

SFS-EN ISO 11905-1:1998
Determination of total nitrogen content of a water sample by FIA technique according to SFS-EN ISO 11905-1:1998.
39138 €
Ask more

Total sugars from feedstock with Luff–Schroorl method

Determination of total sugar content, expressed as glucose, from food and feed with Luff–Schroorl titration method.
169289 €
Ask more

Total sulphur compounds in biogas or natural gas

Determination of total sulphur content in biogas / natural gas. Components include • hydrogen sulphide • carbonyl sulphide • methanethiol (methyl mercaptan) • ethanethiol (ethyl mercaptan) • 2-methyl-2-propanethiol (tert-butyl mercaptan) • propanethiol (n-propyl mercaptan) • butanethiol (n-butyl mercaptan) • 2-propanethiol (iso-propyl mercaptan) • dimethyl sulphide • ethyl methyl sulphide (methyl ethyl sulphide) • diethyl sulphide • tetrahydrothiophene (THT) Please mention if you require suitable sample bag for collecting the sample.
7921,095 €
Ask more

Transfer of antimicrobial components from paper or board

EN 1104
Paper or paperboard that comes into contact with food must not release processing aids that have an antimicrobial effect on food. This analysis is used determine the transfer of antimicrobial constituents from paper and board materials and articles intended for food contact.
142 €
Ask more

Transfer of colour of paper or board

PN-EN 646:2019-03
This test is used to evaluate the transfer of color of papers and boards that are inteded to come into contact with foodstuffs against a greyscale to provide a rating for the bleeding.
93193 €
Buy

Transfer of fluorescent whitening of paper or board

PN-EN 648:2007
This test is used to evaluate the fastness of fluorescent whitened paper and board that are inteded to come into contact with foodstuffs against a UV light to provide a rating for the bleeding.
43143 €
Buy

Transverse distortion of textiles

AATCC 179
This test determines the change in skewness in woven and knitted fabrics or twist in garments upon being subjected to repeated automatic domestic laundering procedures.
58161 €
Ask more

Twist in yarns

EN ISO 2061
This test determines the direction of twist in yarns, the amount of twist in turns per unit length and the change in length on untwisting by a direct counting method. The method cannot be used to yarns which stretch more than 0.5% when the tension increases from 0.5 cN to 1.0 cN or yarns with linear density over 2000 tex.
63166 €
Ask more

Uranium (U) from fertilizer raw materials

Analysis includes acid degradation of the sample and determinations of uranium (U) using ICP-SFMS technique. The concentrations of uranium is presented in the results in unit mg / kg d.m.
60170 €
Ask more

Urine resistance of textiles

Determination of urine resistance of textiles by an inhouse method.
42144 €
Ask more
3,4293,529 €
Buy

Vicat softening point from plastics

EN ISO 306
Vicat softening point is the temperature where a flat pointed needle penetrates the sample to a thickness of 1 mm when loaded with a 10 N or 50 N load. In the test, the sample is placed in an oil bath that is heated at a rate of 50 °C / h or 120 °C / h and the needle is placed on the surface of the sample.
107220 €
Buy

Vicker hardness for metals

ISO 6507-1, ASTM E92-17
Vicker hardness is used to observe material's ability to resist plastic deformation from a standard source. The method can be used for all metals.
42149 €
Buy

Vinyl chloride content in plastics

Determination of vinyl chloride (chloroethane, CAS 75-01-4) content in plastics.
303413 €
Buy

Viscosity determination – cone plate rheometry

ASTM D 7395 – 07
Viscosity determination for liquids and suspensions using cone plate rheometer with 500 s-1 shear rate.
92312 €
Ask more

Vitamin A from food sample

Determination of vitamin A in solid samples by HPLC technique.
70178 €
Ask more

Vitamin analysis for food samples

Determination of vitamins from food samples using HPLC technique. Package includes determinations of: • Provitamin A (beta-carotene) • B vitamins (B1, B2, B6, B7 and B12) • Vitamin C • Vitamin E.
480595 €
Buy

Vitamin D from food sample

Determination of vitamin D from solid food samples with HPLC technique.
70178 €
Ask more

VPD-ICP-MS

Determination of trace metal contamination on silicon wafer and thin film surfaces using VPD-ICP-MS method. There are two different options for the VPD-ICP-MS: VPD-ICP-MS for bare-silicon wafer and VPD-ICP-MC for thin film samples.
478953 €
Buy

Water absorptiveness of paper or paperboard with the Cobb method

ISO 535
The test measures the water aborptiveness of sized paper and board. The method is not suitable for grades with grammage less than 50 g/m2 or embossed paper.
80128 €
Buy

Water analysis package (wide)

Analyses to be performed on a water sample: • Oils and greases • Elements (Al, As, Ba, B, Cd, Ca, Cr, Cu, Sn, Fe, Mg, Hg, Pb, K, Se, Na, Sr, Zn) • Bicarbonate (HNO3) • Bromide, Br • Chloride, Cl • Conductivity at 25 °C • Anionic detergents • Cationic detergents • Total hardness • Fluoride, F • Total phosphorus, P • Appearance • Silicate, SiO2 • TDS • Total suspended solids • Sulphate, SO4 • Alkalinity • Nitrate, NO3 • Phenolic compounds.
741969 €
Ask more

Water quality analysis (only microbiological)

Analytical package to determine the quality of potable water. The package includes the following analyses: • Coliformic bacteria • E.
230 €
Buy

Water quality analysis of drinking water (borehole)

Analytical package to determine the quality of borehole water. The package includes the following analyses: • E.
499 €
Buy

Water quality analysis of drinking water (ring well)

Analytical package to determine the quality of borehole water. The package includes the following analyses: • E.
390 €
Buy

Water resistance of the glue bond by immersion of corrugated board

ISO 3038
This test is used to evaluate the strength of a glue bond in a corrugated cardboard after being immersed in water. This test is useful especially for applications where high degree of resistance to wet conditions is required.
86186 €
Buy

Water suction speed of textiles

DIN 53924
This method uses the rising height method to determine the suction speed of textiles against water.
58161 €
Ask more

Water vapor transmission rate (WVTR) of films and sheetings

ASTM F1249
Determination of the water vapour transmission rate (WVTR) according to standard ASTM F1249 of the material. Water vapour transmission rate (WVTR) represents the amount of water vapour that passes through a material or substance over a set period of time.
286403 €
Buy

Water vapor transmission rate (WVTR) of packages

This test is designed to measure the water vapour transmission rate (WVTR) of readily formed packages such as cups, bottles, trays, and containers. The test is done with three replica measurements.
586703 €
Buy

Water vapor transmission rate (WVTR) of textiles

ASTM E96-B
Water vapor transmission rate of textiles is used to evaluate the breathability of fabrics. The test measures the amount of water vapour that goes through the fabric in a controlled environment.
157265 €
Buy

Water vapour transmission rate (WVTR) of paper or board with the gravimetric dish method

PN-ISO 2528:2000
The gravimetric dish method can be used to determine the water vapor transmission rate (WVTR) of materials that have a high water vapor permeability. This method is intended for sheet materials that have water transmission rate over 1 g / m2 / day.
86186 €
Buy

Wet strength of paper or board

ISO 3781:2011
In this test the tensile strength of paper or board is measured after being iimmersed in water for a specified period. This test can be evaluated the suitability of boards and papers that may be exposed to water at some point of their use, such as packagin materials.
150250 €
Buy

Width and length of fabrics

EN 1773
A test method to determine the width and length of textiles and fabrics.
10113 €
Ask more

X-ray photoelectron spectroscopy

XPS is a semi-quantitative technique to measure the elemental composition of the surface of a material. In addition, it can also determine the binding states of the elements.

XPS depth profile + HR measurement

XPS depth profiling combines a sequence of ion gun etch cycles with XPS analyses that provide a quantitative and semi-quantitative composition (mass-%) of the sample surface and layer thicknesses.

XRD analysis for bentonite

EN 13925/2006
Quantitative mineralogical analysis by X-ray powder diffraction (XRD) on bentonite samples to identify and quantify the concentration of occurring minerals. The analysis is performed according to EN 13925.
469590 €
Buy

XRF analysis (Si, Al, Ca, Ti, P, Mn, Cr and C) for SiFe samples

X-ray fluorescence measurement for SiFe samples. The analysis includes the determination of the following elements: Si, Al, Ca, Ti, P, Mn, Cr and C.
350420 €
Buy

XRR of thin films

X-ray reflectometry (XRR) analysis of thin film samples. Results include density (g / cm3), thickness (nm), and roughness (nm) values.
185298 €
Buy

Yarn evenness determination

Determination of the evenness of yarns by an inhouse method.
42144 €
Ask more

Yellowness of paper or board

DIN 6167
The influence of temperature, chemical reactions, radiation, etc make white or colorless materials, for example, art material, paper, and paints yellow. The yellowness number indicates the change in the yellow value of a sample due to one or more of the above-mentioned reasons.
57157 €
Buy

Zeta potential measurement

Determination of the zeta potential of the particle-solvent interface.

Questions? We're happy to help.

Person on a computer
1.Order one of our testing services or ask for help.
Delivery package
2.Send us your samples.
Laboratory technician conducting measurements
3.We measure your materials or products.
Report inside an envelope
4.You receive the test report and the results in your email.

Ask for a quote

Contact us below to get a quote for testing services in one business day.

You can also email us at info@measurlabs.com or call us at +358 50 336 6128

We always reply within one business day.