Laboratory testing services

Smoke and toxicity testing by IMO 2010 FTP Code Part 2 is performed on surface materials to assess their suitability for marine use. The specimen is placed in a horizontal position under a cone radiator inside a … Read more

Diesel exhaust fluid (DEF) is an additive used in diesel-powered vehicles to help the catalytic reduction of nitrous oxides. Thus, the use of AdBlue and other exhaustive fluids … Read more

The method measures the diffuse blue light reflectance factor of paper and board by the ISO 2470-1 standard. The test is limited to white and near-white samples. The measurement is used to determine the whiteness level of … Read more

This test is used to evaluate the transfer of color from paper or board that is intended to come into contact with food. The applied simulants are Olive oil, 3% acetic acid, Alkaline salt solution (saliva simulant), … Read more

Quantitative mineralogical analysis by X-ray powder diffraction (XRD) on bentonite samples to identify and quantify the concentration of occurring minerals. The analysis is performed according to EN 13925. The results of the analysis are … Read more

X-ray reflectometry (XRR) analysis of thin film samples. Results include density (g/cm³), thickness (nm), and roughness (nm) values. For film thickness measurements, the thickness should generally be below 100 nm and at least one order of magnitude larger than the … Read more

Optical emission spectrometry (OES) is used to determine the chemical composition of a plate-like copper sample. The elemental composition results are expressed as mass percentages. Read more

This test is used to determine the folding endurance of paper or board using the Köhler-Molin, Lhomargy, MIT, and Schopper testers. During the test, a narrow strip of paper is folded forwards and backward in a standardized manner, so that it … Read more

During this analysis, the surface of a smooth and hard sample is imaged with an atomic force microscope (AFM). Topological images are provided from several locations around the sample. The measurement area is 5 x 5 micrometers, if not agreed otherwise. Read more

Determination of the residual or impurity level of mineral oil MOSH/MOAH in paper and board. The results are reported as the amounts/concentrations of groups of MOSH and MOAH. The groups are formed based on the number of … Read more

This test can be used to determine the linear density of all kinds of yarns in package form with the rope method. The method is applicable to single yarns, folded yarns, and cabled yarns. However, the method … Read more

Determination of Al, As, Ba, B, Cd, Ca, Cr, Cu, Sn, Fe, … Read more

Determination of degree of curl after one-sided wetting as per TAPPI 466 standard for paper or board samples. Read more

The burning rate of horizontally mounted materials designed to be used in vehicles and buses must be tested with the UN/ECE R118 annex 6 test before they can be approved for … Read more

Grammage measures the weight of the sample in relation to its area. Grammage values are commonly used to categorize different board and paper grades. In this method, the components … Read more

Determination of total organic carbon (TOC) content of water samples. The results of the analysis will be present in mg/l. Read more

A dilatometer is used to determine the linear thermal expansion of a material as a function of temperature. The temperature range of the measurement is generally between 25 °C and 1,600 °C. There … Read more

The substances of very high concern (SVHC) analysis provides comprehensive material screening for SVHC substances as listed in the Registration, Evaluation, and Authorization of Chemical Substances (REACH). The maximum allowed … Read more

Determination of CH₄, CO₂, and H₂S in gas samples with µGC/µTCD. The price applies to non-flammable gasses. Please contact our experts if you are interested in the analysis of flammable gasses. Read more

Melatonin content of solid or liquid (e.g. nasal spray) supplement product. Read more

This analysis package is used to determine the amount of polycyclic aromatic hydrocarbons in food, feed, and supplement products. The package covers the following substances, known together as PAH4: benzo(a)pyrene … Read more

Determination of microplastics present in food samples using Raman spectroscopy. The results of the analysis will specify different types of polymers by size, for example, 1–10 µm, 10–100 µm, and 100–1000 µm. Read more

The melting behavior of fusible materials used in vehicles must be tested as per UN/ECE R118 annex 7. In this test, it is monitored whether the specimen … Read more

Bending stiffness testing is performed to evaluate cardboard's stiffness by measuring the resistance to bending with 4-point loading. The results express the bending stiffness of the material in the machine direction and the cross … Read more

Determination of certain aromatic amines derived from azo dyes in accordance with the standard EN 14362. Read more

Printing ink set-off can occur on the reverse side of printed labels, lids, cups, and packaging film, either in a stack or in the reel after printing. This creates a potential for … Read more

Determination of the elemental composition (ratio of the elements) using RBS (Rutherford Backscattering Spectrometry). Also, depth profiles of the sample surfaces can be determined using RBS. The method is suitable for e.g. thin films, coatings, and … Read more

In this test, the tensile strength of paper or board is measured after the material has been immersed in water for a specified period. The test can be used to evaluate the functionality of board and paper that may be exposed to water at … Read more

Test package for mycotoxins listed in Commission Regulation (EU) 2023/915 (previously 1881/2006), including the following determinations: Aflatoxin B1, … Read more

Determination of a metal concentration on an ALD thin film using LA-ICP-MS. The measurement includes the analysis of one element, which is selected upon odering. Values will be reported in ppm (μg/g). Read more

Analysis of benzoic and sorbic acids from food products using an HPLC-UV method. The analysis method has been accredited for the food matrix. Read more

Specific migration of elements listed in Annex II of Commission Regulation (EU) 2020/1245 of 2 September 2020 amending … Read more

ISO 10993-23 tests for irritation encompass a range of testing options for assessing the impacts of medical devices on the patient's tissues. Tests can be performed in vitro or in vivo, depending on the requirements … Read more

This test measures the air permeability of fabrics according to standard EN ISO 9237. Most types of fabrics, including industrial fabrics for technical purposes, nonwovens, and made-up textile articles, are suited for the test. The … Read more

Determines the strength of straight seams in fabrics and apparel when a force is applied perpendicular to the seam. The method is applicable to most fabrics, but typically not … Read more

This test determines the distortion of a woven fabric in which the weft yarns are perpendicular to the warp yarns. Read more

This test is used to detect optical brighteners with UV light according to an in-house method. Optical brightening agents (OBAs) are often added to fabrics by manufacturers to increase their perceived whiteness or brightness. Read more

IMO 2010 FTP Code Part 8 testing for upholstered furniture is used to assess the suitability of materials for maritime use. The results can be used for type approval (wheel mark). The testing is performed on the actual … Read more

This test is designed to measure the oxygen transmission rate of finished packages, including cups, bottles, trays, and containers. Two replica measurements are included in the test price. Temperature can be … Read more

The QuEChERS sample preparation method and HPLC-MS analysis are used to accurately determine the pyriproxyfen concentration of a sample. The result will be given as µg/l or mg/kg, depending on whether the sample is liquid or solid. Read more

Specific migration of formaldehyde [CAS 50-00-0; Ref No 17260/54880; FCM 98] from a plastic food contact material. The compound is listed under FCM 98 in Annex I of European Regulation No 2011/10. Formaldehyde is … Read more

Accredited testing of the performance of type II face masks according to EN 14683 standard. The tests include bacterial filtration efficiency (BFE), differential pressure (DP) … Read more

Analysis of the migration of non-intentionally added substances (NIAS) into food simulant E. NIAS have various sources and can be grouped into side … Read more

General compliance testing package for repeated-use plastic food contact materials (FCMs) according to regulations … Read more

Migration testing of lead and cadmium from ceramic articles according to Commission Directive 2005/31/EC (amending Council Directive 84/500/EEC). This test does not … Read more

Determination of particle size distribution (PSD) by Laser Diffraction (LD). Analysis can be performed on dispersions or solids that can be dispersed in water or … Read more

Test to determine the mechanical and physical properties and safety of cutlery and feeding utensils intended … Read more

This analysis package contains the quantification of the following substances, included in the REACH Authorization List: Substance Abbreviation CAS number Bis(2-ethylhexyl) phthalate DEHP 117-81-7 Benzyl butyl phthalate BBP 85-68-7 Dibutyl … Read more

The analysis includes the preparation of a cross-section sample using Broad Ion Beam (BIB). After preparation, the cross-section is imaged with a scanning electron microscope (SEM), and elemental … Read more

Bursting strength measures the maximum hydraulic pressure that a material withstands without breaking. The bursting strength of corrugated cardboard is measured from the top and bottom sides of the sample, and the result is given as an … Read more

With this test, the conductivity of water extraction (hot or cold) from a paper, board, or pulp sample is measured. The extraction is performed with deionized water, therefore the results may vary … Read more

VPD ICP-MS allows the determination of trace metal contamination on the surface of bare silicon wafers and thin films. The full surface of the wafer is scanned during the analysis. VPD ICP-MS analysis is performed using acid to dissolve the top surface of the wafer (~2 nm). The … Read more

Screening of pesticide residues from various matrices, including food, feed, and supplements. Pesticides are extracted using acetonitrile according to the QuEChERS (Quick, Easy, Cheap, Effective, Rugged, and Safe) … Read more

Standard EN 228 outlines the testing requirements and methods for gasoline quality testing. The following tests are included in the … Read more

N-nitrosamines and N-nitrosatable substances are present, usually in trace quantities, in various environmental media, certain food products, cosmetics, and rubber products. In particular, those found in … Read more

A cross-section sample is prepared using freeze fracturing: the sample is frozen in liquid nitrogen (-195 C°), followed by cracking. The cracked surface is then imaged with a scanning electron microscope (SEM). … Read more

Determination of vinyl chloride (chloroethane, CAS 75-01-4) content in plastics. Both ECHA and the US EPA have identified vinyl chloride as a carcinogen. Read more

Cement material heat of hydration test using Isothermal Conduction Calorimetry (ICC) according to standard EN 196-11. Read more

Particle size distribution (PSD) is determined from scanning electron microscope (SEM) images of the particles. The method is most suitable for particle sizes between 200 nm and 200 µm. Depending on the particle shapes, the method includes … Read more

Specific migration of elements listed in Annex II of Commission Regulation (EU) 2020/1245 of 2 September 2020 amending and correcting Regulation … Read more

Histamine is a biogenic amine formed by the decarboxylation of histidine by microbial activity, which causes allergy-like symptoms upon consumption. Preserved fishery products have been identified as a potential source of histamine-related … Read more

Accredited testing of the bacterial filtration efficiency (BFE) of face masks according to EN 14683 standard. Read more

This metal screening analysis includes the semi-quantitative determination of 70 elements. The method can be used, for example, to determine the background concentrations of metals in environmental samples or to study the elemental distribution of unknown … Read more

The Hertzberg staining test is used to determine the main fiber content of papers and boards. In the test, a saturated solution of zinc chloride, iodine, and potassium iodide is used to color the … Read more

Specific migration testing of terephthalic acid [CAS 100-21-0; Ref No 24910] and isophthalic acid [CAS 121-91-5; Ref No 19150] by European Union Regulation No … Read more

According to Regulation (EU) No 10/2011, food simulant C shall be used to assess overall migration into alcoholic foods with an alcohol content of up to 20 % and those foods which contain a relevant amount of … Read more

The chemical oxygen demand (COD) of pulp process liquid is measured according to the ISO 6060 standard to evaluate the environmental burden of the water sample. The sample must be kept at a temperature … Read more

Lignin sample molar mass distribution analysis using size exclusion chromatography (SEC) coupled with a UV detector at wavelength 256 nm. The lignin is dissolved in a suitable solvent before analysis. The SEC system is calibrated with a … Read more

Measurement to determine the powder flowability index according to ASTM D6393 standard for bulk solids characterization. The method includes the measurement and calculation of the following: Angle of repose, Aerated bulk density, Packed bulk … Read more

Accredited testing of the performance of type II face masks according to EN 14683 standard. The tests include bacterial filtration efficiency (BFE), … Read more

The method can be used to determine the thickness of textile products under specified pressure. The test is not applicable to textile floor coverings, geotextiles, nonwovens or coated fabrics. Read more

Viscosity determination for liquids and suspensions using a rotary rheometer up to 200 s-1 shear rate and 200 °C. The test price includes a shear rate ramp in one test temperature. For custom programs, please be in contact with the … Read more

This test is used to evaluate textile's electrostatic properties by measuring the electrical resistance. Read more

The overall migration limit (OML) is the sum of all the compounds that might migrate from an FCM into food. According to Regulation (EU) No 10/2011, food simulants D1 and D2 are assigned … Read more

With the 53830-4 standard the linear density of single and plied elasto-yarns can be determined according to the short-length method. The method is applicable to elasto-yarns including core-spun yarns … Read more

Determination of Be, Ba, Co, Al, Mg, Cu, Li, Mn, Ag, Sn, Ti, V, Zn, Tl, B, Hg, Mo, Fe, Ca, K, U, P, Cd, Na, Cr, Ni, Pb, Sb, As, and Se in water … Read more

As a part of ISO 12947, this method is used to asses the appearance changes of textiles that have undergone the Martindale abrasion test. The test is applicable to all … Read more

ICP-OES measurement package for waste and construction material samples. The assay includes the pre-treatment of the sample with aqua regia … Read more

The analysis includes the preparation of a cross-section sample using a Focused Ion Beam (FIB) and the imaging of the cross-section surface with a Scanning Electron Microscope (SEM). Read more

Determination of the fluoride (F-) content in a water sample by ion chromatography (IC) technique. Results will be reported in unit mg/l. Read more

The amount of respirable dust in indoor air is measured using SEM and a precision scale. The sample is collected using a sample collector and pump, which are sent to the customer for sampling. The aerodynamic diameter of respirable dust particles is < 4 … Read more

Determination of the amount of hydrogen fluoride (HF) in a gas sample. Testing is performed by pumping the gas through a gas trap, after which the content of the trap is analyzed. The required pump and gas trap will be delivered to the customer before … Read more

XPS is a semi-quantitative technique allowing to measure the elemental composition of the surface of materials. In addition, it can also determine the binding and electronic state of the atoms. XPS is a surface-sensitive technique. Typical … Read more

Determination of free lignocellulosic monomeric sugars (glucose, mannose, galactose, xylose, arabinose) from the solution using ion chromatography. The results are reported as mg/ml of each monomeric sugar in the sample. Read more

Determination of the speed of transfer of optical brightening agents (OBAs) from paper and board. The test is performed against UV light to provide a rating for the bleeding of the … Read more

Determination of resin fatty acids by GC-MS. The measurement includes the determination of the following compounds: • Dichloro-9,10-stearic acid • Linoleic acid • Linolenic acid • Oleic acid • Palmitic acid • Palmitoleic acid • Stearic acid • Abietic … Read more

ICP-MS elemental analysis for geological samples (rocks, ore, mining samples) with Aqua Regia digestion. Includes following elements: Ag, Al, As, Ba, Be, Bi, Ca, Cd, Ce, Co, Cr, Cs, Cu, Fe, Ga, Ge, Ge, Hf, In, … Read more

Determination of total sugar content, expressed as glucose, of food and feed with the Luff–Schoorl titration method. Read more

This test is suitable for plastic food contact materials that are meant to be used repeatedly in contact with foods that can be simulated with food simulant B. According to Regulation (EU) No … Read more

Qualitative identification of chemical groups in solid samples by Fourier-transform infrared spectroscopy (FTIR). Results will be delivered as an FTIR spectrum. In addition, a comparison to an FTIR library … Read more

This test is used to measure the overall migration of potentially harmful substances from reusable plastic FCMs into simulant D1. According to Regulation (EU) No 10/2011, food simulants D1 … Read more

ICP-OES measurement … Read more

This test determines the resistance of color of all kinds of textiles to the combined effect of artificial sweat and artificial daylight (D65). Read more

Analysis to confirm that lactose-free products do not contain lactose above 0.1 grams per 100 g of food. Enzymatic assay. Read more

The method gives the number of stitches per unit length and unit area in most knitted fabrics. Read more

Determination of fluorine content in solid fuels according to the EN 15408 method. The fluorine content of the sample will be obtained by distillation with overheated water vapor of a solution in phosphoric … Read more

Standard analysis for manure/compost. The package includes the analyzes listed below: • Specific weight • Total Nitrogen • Soluble Nitrogen • K and P • Water soluble Phosphorous • Moisture • Loss on ignition Manure samples should be taken … Read more

Determination of carbon, hydrogen, nitrogen, sulfur, and oxygen content of the organic sample. CHNS analysis (”LECO analysis”) is performed using Dumas combustion method, where the sample is combusted at elevated temperature followed by gas … Read more

Determination of the amount of water-soluble chloride in solid matrices. Chloride is extracted from the dried sample with water in a single-stage shaking test at room temperature (20 ± 5°C) … Read more

This test gives the breaking force and elongation at break of textile yarns according to ISO 2062 standard. During the test, a constant extension rate is used. The method … Read more

The overall migration limit (OML) is the sum of all the compounds that might migrate from the FCM into food. According to Regulation (EU) No 10/2011, food simulants D1 and D2 are assigned for foods that have a … Read more

We offer specific migration testing for almost all the compounds listed in Commission Regulation (EU) No 10/2011 … Read more

According to Regulation (EU) No 10/2011, food simulant E is assigned for testing the migration of potentially harmful substances into dry foods. Read more

Metal analysis package for a lignin sample including the following elements: Al, Cd, Co, Pb, Hg, P, Na, Zn, Sb, Ca, Cu, Mg, Mo, K, Ti, As, Cr, Fe, Mn, Ni, Si and V. The analysis is performed with ICP. Read more

Determination of the water (H₂O) ppm-level content of biogas or natural gas sample. Determination will require a sample collected into a gas cylinder under at least 5 bar pressure. Read more

The fabric's tendency to fuzz, lint, and pill is determined with the Martindale or box method. Read more

The test gives the tensile strength of single and plied yarns with the knot method. Read more

Determines the mass loss of specimens that have undergone the Martindale abrasion resistance test. The test is applicable to all uncoated fabrics. Read more

Determination of particle size distribution (PSD) by laser diffraction (LD). The analysis is performed on solid samples. The method can analyze particle sizes from 0.4 µm to 2,000 µm. … Read more

The test is used to determine the ash content of a solid recovered fuel sample according to EN 15403 or ISO 21656 methods. The ashing temperature is typically 550 °C but … Read more

Analysis of heavy metal (Pb, Cd, As, Hg) traces from a food, feed, or supplement sample. Read more

Accredited testing of the differential pressure of face masks according to the EN 14683 standard. Read more

Determination of crystallinity (crystalline, amorphous) of particles using XRD and identification of the percentage of particles measuring < 500 nm. The analysis is performed … Read more

Specific migration of 1,1,1-trimethylolpropane (CAS 77-99-6; Ref No 13380, 25600, 94960; FCM 141; TMP) from a plastic food contact material. The compound is listed under FCM … Read more

Determination of the degree of substitution of chemically modified carbohydrate samples with the ³¹P NMR method. Suitable for mono-, di-, oligo- and polysaccharides. Price includes sample preparation through … Read more

This test determines the color resistance of textiles designed to change color (photochromatic textiles) upon brief exposure to light. Read more

The CIE whiteness test measures the whiteness of paper or board under the CIE D65 daylight standard. The method gives the complete visible spectral range (VIS) information about whiteness, unlike the ISO ( ISO 2470 ) method, which operates only … Read more

In this absorption test, castor oil is used to evaluate the oil absorbance of a paper or board product. During the analysis, oil is applied on top of the sample with an L&W Cobb sizing tester, and the mass of oil absorbed … Read more

Grazing Incidence X-ray diffraction (GI-XRD) measurement of thin film samples. Read more

Printing ink set-off can occur on the reverse side of printed labels, lids, cups, and packaging films, either in a stack or in the reel after printing. This creates a potential risk … Read more

Determination of volatile organic compounds (VOC) in water using the GC-MS technique. The analysis determines the concentrations of 67 volatile compounds including BTEX, DIPE, … Read more

This analysis is used to determine the amount of salicin contained in biomass or wood-based extracts. Read more

This test is used to determine the alkali reserve of papers and boards, especially those that contain alkaline pigments or other alkaline materials. Read more

The method determines the cation content in the ultrapure water samples using ion chromatography (IC). The analysis includes the determination of Ammonium (NH4+), Calcium (Ca2+), Lithium (Li+), Magnesium (Mg2+), Potassium (K+) and Sodium (Na+). The sample must … Read more

This method is used to determine the gross heat of combustion of solid building products at constant volume in a bomb calorimeter. Results are reported in J/kg. If the product is … Read more

Particle size distribution (PSD) and shapes of the particles are determined using image analysis. The method is suitable for particles sized 2-3000 µm. Image analysis characterizes particle shapes, such as fibers, rods, … Read more

Quantification of nitrogen in liquid samples using the Kjeldahl method. This test is suitable for liquid samples, such as pulp processing solutions and water. Results are given as mg/l. Read more

According to Regulation (EU) No 10/2011, materials and articles intended for contact with all types of food shall be tested with food simulants A (10% ethanol), B (3% acetic acid), and D2 (olive … Read more

Determination of the antibacterial activity of textiles and fabrics with the Agar method. This method is suitable for textiles that have not been treated with antibacterial substances that react with … Read more

Determination of PFAS compounds in water, soil, or sediment. You can choose the standard analysis package (13 PFAS compounds) or the extended one (24 PFAS compounds) from the dropdown list upon … Read more

Determination of sulfur compounds in biogas or natural gas. The analysis includes the determination of the following components: hydrogen sulfide, carbonyl sulfide, methanethiol (methyl mercaptan), ethanethiol (ethyl … Read more

Determination of NaClO₃, ClO₃, and ClO₂ content of a liquid sample. Contents of chlorate and chlorite are measured by using the ion … Read more

This analysis is the next step for the "Qualitative analysis of nanoparticles using SEM according to EFSA guideline". Qualitative analysis determines if the sample contains particles … Read more

This test measures the water absorption properties of paper and board. The method is not suitable for grades with grammage less than 50 g/m² or embossed paper. It is also unsuitable for highly water-absorbing papers, … Read more

Carotenoids are pigments present in various food products either naturally or as additives, for example as food colorants. This test package includes the determination of the following carotenoids: Apocarotenal (trans-β-apo-8'-carotenal) [CAS: 1107-26-2], … Read more

Determination of the oxygen transmission rate of films and sheet-like materials. The test is performed on two parallel samples simultaneously. … Read more

Determination of ethylene oxide and 2-chloroethanol from food (raw material) samples. Results are reported as the sum of ethylene oxide and 2-chloroethanol expressed as ethylene oxide. Read more

The Edgewise crush test (ECT) measures the edge strength of boards. The results give an indication of the board's resistance to crushing during processing and use. In the ECT test, the test specimen is loaded perpendicularly to the open … Read more

This method determines the resistance of fabrics to penetration by water with the hydrostatic pressure method. The method is primarily intended for dense fabrics. Read more

This test is performed to determine the amount of inhalable dust present in indoor air. The sample is collected using a sample collector and pump, which are sent to the customer upon ordering at no extra cost. Inhalable dust particles have an aerodynamic … Read more

This test determines the penetration of greases and oil, commonly found in foodstuffs. The test can be used to evaluate and grade the usability of greaseproof papers and vegetable … Read more

Determination of the evenness of yarns by an in-house method. Read more

Determination of total fluorine (F) content in plastic according to the EN 15408 mod. method. The fluorine content of the sample is obtained using oxygen bomb combustion treatment followed by ion chromatography (IC). Possible sample … Read more

Determination of metal concentrations on ALD thin films using LA-ICP-MS. The standard analysis package includes the quantification of the following elements: Ca, Cr, Cu, Co, Er, Fe, Ge, Pb, Mn, Mo, Ni, K, Na, Sn, Ti, Ta, Zn, … Read more

This method is used for testing the resistance to compression of complete, filled transport packages. A stacking test on complete, filled transport packages is also performed using the same apparatus. Read more

The EN ISO 9239-1 fire test is used to evaluate the ability of flooring to withstand flames and radiant heat. The flame spread, smoke generation, and lowest radiant heat to sustain burning are … Read more

The measurement includes the analyses listed below: Phosphorous acid and its salts, Phosphonic acid expressed as fosetyl, Fosetyl (ethyl hydrogen phosphonate), Fosetyl-Al (sum of fosetyl, phosphonic acid, and their salts, expressed as … Read more

Measurement to determine the alpha-chaconine and alpha-solanine concentrations in food samples (potato). If other glycoalkaloid determinations are needed, please contact the Measurlabs contact person. Read more

In this test, a horizontally oriented test specimen is exposed to a small flame ignition source with a nominal thermal power of 50 W. Together with the vertical burning test, the results … Read more

In the test, a vertically oriented test specimen is exposed to a small flame ignition source with a nominal thermal power of 50 W. Together with the horizontal burning … Read more

Analysis of non-intentionally added substances (NIAS), which are chemicals that are present in a food contact material (FCM) or food contact article (FCA) but have … Read more

Determination of the intermingling point of yarns by an in-house method. Read more

With this test, the pH of water extraction (hot or cold) from a paper, board, or pulp sample is measured. The extraction is performed … Read more

Differential Scanning Calorimetry (DSC) is used to determine transition temperatures and enthalpy changes of solid and liquid samples under controlled temperature changes. The analysis can be used to determine the … Read more

Determination of fiber length by an in-house method. Read more

Parts 1 and 2 of the EN 1021 standard are used to assess the ignitability of upholstered seating. A smoldering cigarette and … Read more

Tensile test for extrusion and injection molded plastics at room temperature. The test characterizes the tensile modulus, yield point, and point of break in accordance with the EN ISO 527-2 standard. The price includes the … Read more

Heat deflection temperature (HDT), also known as heat distortion temperature, describes the plastic's resistance to deformation by a given load at an elevated temperature. It can also give insight into the injection … Read more

Analysis of mycotoxin citrinin [CAS: 518-75-2] from food, feed, and supplement products. The maximum level of citrinin in food supplements based on rice fermented with red yeast (Monascus purpureus) has been defined as 100 µg/kg in Commission Regulation (EU) … Read more

Tear strength is used to evaluate the mechanical strength characteristics of textiles. Tensile properties and elongation at break can be determined by a variety of standards depending … Read more

The ICP-MS technique provides information on the concentrations of metals in a sample. The measurement includes the following elements: Na, Mg, K, Ca, Li, Be, B, Al, Si, P, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Ga, As, Se, Rb, Sr, Zr, Nb, … Read more

In this analysis, a large area of a sample is screened with a scanning electron microscope (SEM) to find an area of interest containing cracks or impurities. Such areas are likely to be found in a few locations around the sample and might be challenging to … Read more

With this test, the coefficient of static friction of most paper-based packaging materials can be measured. The testing standard will be chosen depending on the … Read more

This test is used to give indication about textile's oil stain resistance, more specifically its resistance to wetting by hydrocarbons. In this test a series of selected liquid hydrocarbons with different surface tensions are used and … Read more

This test is a combination of two testing standards that are used to assess the dimensional changes in textiles and clothes after a dry cleaning process. The results are … Read more

This test determines the direction of the twist in yarns, the number of twists in turns per unit length, and the change in length on untwisting by a direct counting method. The method cannot be used for yarns that stretch more than 0.5% when the tension … Read more

This test is used to determine the water absorbency of various textiles and fabric materials. A drop of water is placed on the sample, and the time it takes for the drop to be fully absorbed into the material is measured. The result is given in … Read more

Screening of volatile organic compounds (VOC) including siloxanes, terpenes, ketones, furans, and hydrocarbons (C6-C14) in biogas or natural gas. A sampling kit is available upon … Read more

Analysis of alkaloids produced by the ergot fungus Claviceps purpurea (ergometrine, ergotamine, ergosine, ergocristine, ergocryptine, ergocornine, as well as the corresponding -inine epimers) in food or supplement products. In accordance with EU … Read more

Total reflection X-ray fluorescence (TXRF) allows for surface elemental composition measurement. It is often used to map trace contaminations. Detection limit: 109 – 1011 at/cm2 Depth resolution: about 3-9 nm (depending on the material) Read more

This analysis is used to determine the concentrations of carbon, hydrogen, nitrogen, and sulfur in solid recovered fuel samples. The method is suitable … Read more

Fire classification of construction materials is generally performed by the European classification standard EN 13501-1. The price of this product includes the … Read more

ICP-OES heavy metal measurement for soil, sludge, or sediment samples. … Read more

Determination of the elemental composition (ratio of the elements) using RBS (Rutherford Backscattering Spectrometry). Also, depth profiles of the sample surfaces can be determined using RBS. The method is suitable for e.g. thin films, coatings, … Read more

Measurlabs offers tailor-made analysis packages for unidentified samples. Our experts will formulate the needed analysis package based on the information provided by the customer. The formulated package aims to provide sufficient information to … Read more

GC-MS analysis of 16 PAH compounds, which are listed as high-priority pollutants by the US-EPA. The analyzed PAH compounds are: naphthalene, acenaphthylene, acenaphthene, fluorene, phenanthrene, … Read more

Carbon-13 NMR spectroscopy measurement for samples that can be dissolved in deuterated solvents. The price includes sample preparation, deuterated solvent (D₂O, DMSO-d, or CDCl₃), NMR tube, measurement, and basic data processing. The results are delivered as an image … Read more

With this analysis, the volatile organic compounds (VOC) present in a biogas sample can be quantified. Typically, the boiling range of the detected VOCs is 60-280 °C. Samples are collected using a pump and an adsorbent tube. … Read more

Imaging of the sample with transmission electron microscope (TEM) and determination of the elemental composition of the sample using electron dispersive X-ray spectroscopy (EDX). In typical measurement, several images with varying magnifications are taken to get a good … Read more

X-ray fluorescence measurement for SiFe samples. The analysis includes the determination of the following elements: Si, Al, Ca, Ti, P, Mn, Cr and C. The results of the measured elements are reported in … Read more

This test is used to measure the color of paper and board by the diffuse reflectance method with spectral gloss elimination as outlined in standards ISO 5631-1 and ISO 5631-2. The method is not suitable for papers that … Read more

Sterility testing measures the growth of microorganisms on a product after the product has been sterilized. ISO 11737-2 is a harmonized standard for evaluating … Read more

This test is used to determine the effect of a vertical impact on the horizontal edge of finished and filled cardboard containers. In the test, the packaging is placed on a carriage that is rolled against an impact apparatus. … Read more

The filament count of fibers and threads in textile samples is determined by an in-house method. Read more

Accredited testing of the microbiological cleanliness (Bioburden) of face masks according to EN 14683 standard. The results include the viable aerobic bacteria, yeasts and molds. The colony-forming units (CFU) are … Read more

Analysis of deoxynivalenol (DON) from food, feed, and supplement products. DON is a mycotoxin produced by certain Fusarium fungi. According to EU regulations, materials that potentially require testing include: Unprocessed cereals, Pasta, Bread, Processed, … Read more

Vertically supported textiles and films are to be tested by IMO 2010 FTP Code Part 7 to assess their suitability for marine use. Test results can … Read more

A test method to determine the width and length of textiles and fabrics. Read more

This test measures the ignitability of building materials when exposed to a small flame. The main purpose of the test is to classify building products according to Euroclass B, Bfl, BL, C, Cfl, CL, D, … Read more

This test determines the resistance of color of all kinds of textiles to artificial natural daylight (D65) up to note 7 of the standard. Read more

This measurement detects the migration of heavy metals and aluminum to cold water from paper or board intended as food contact material. The method is … Read more

Quantification of heating value, CH4, CO2, O2, N2, H2, and C2–C5 alkanes in natural gas and biogas … Read more

The biobased carbon content of liquid biofuels indicates the proportion of organic carbon that originates from renewable resources. The method is based on analyzing different carbon isotopes … Read more

Determination of fatty acid profile of crude lipid extract, fats, or oils with GC-MS or GC-FID. The measurement includes the … Read more

Determination of a solid surface's contact angle with one liquid. Practically any liquid can be used as long as the liquid does not affect the surface and the surface tension of the liquid is known. Read more

With this test, the dimensional changes of a paper sample are measured after immersion in water. The measurements are … Read more

Quantification of CH₄ (methane), CO₂ (carbon dioxide), O₂ (oxygen), N₂ (nitrogen), H₂ (hydrogen), H₂S (hydrogen sulfide), and H₂O (water) in natural- and biogas samples with gas chromatography. Additional possibilities to analyze siloxanes … Read more

Analysis of anticholinergic tropane alkaloids in food or supplement products. The testing package includes the following parameters: Atropine (racemic mixture of (-)-hyoscyamine and (+)-hyoscyamine) [CAS: 101-31-5/51-55-8], Scopolamine [CAS: 138-12-5], Sum of atropine and … Read more

In TGA, the sample is heated at a controlled rate or kept at a controlled temperature while its mass is weighed with an extremely precise scale. The analysis may give information about phase transitions, absorption, adsorption, desorption, … Read more

The shelf-life of prepared meals is assessed by performing the following microbiological analyses: • Aerobic microorganisms 30 °C • Enterobacteria • Bacillus Cereus (preliminary) • Yeasts and molds The analyses are performed at the beginning, middle, and … Read more

This test is used to evaluate the compressive strength of paper and board by using the ring crush method. This test is especially useful for determining the usability of shipping containers made from fiberboard. Read more

Surface resistivity testing of clothing or gloves. Standardised test method for protective clothing with electrostatic dissipation for preventing incendiary discharge. Read more

The basic analysis package for manure or compost includes the analyses listed below: • Specific weight • Dry matter • Soluble Nitrogen • Total Nitrogen • P and K Manure samples should be taken within 1 to 2 weeks of application. Composts may … Read more

General compliance testing package for single-use plastic food contact materials (FCMs) by regulation (EU) 10/2011 and … Read more

This test measures the energy required to rapidly delaminate a sheet-type specimen. A z-directional rupture is initiated by the impact of a pendulum having both a controlled mass and a controlled velocity. The … Read more

The test gives the tensile strength of single and plied yarns with the loop method. Read more

Determination of Al, B, Bi, Ca, K, Mg, Na, S, Se, Si, Te, Ti, and Zr from … Read more

Determination of microplastics in water or soil using Raman spectroscopy. The results of the analysis will specify different types of polymers by size, for example, 1–10 µm, 10–100 µm, and 100–1000 µm. Read more

The influence of temperature, chemical reactions, radiation, etc. can make white or colorless materials such as art equipment, paper, and paints yellow. The yellowness number indicates the change in the yellow value of a sample due to one … Read more

Analysis of non-intentionally added substances (NIAS), which are chemicals that are present in a food contact material (FCM) or food contact article (FCA) … Read more

Analysis package of sugars from food or feed sample with HPLC-RID. Read more

Analysis of the total content of glucosinolates using a UV spectrophotometric method designed for rapeseed and other similar materials. Read more

Extended analysis package for phthalates from various matrices using the GC-MS technique. The following compounds can be detected: Compound Abbreviation CAS number Dibutyl phthalate DBP 84-74-2 Diisobutyl phthalate DIBP 84-69-5 … Read more

A test method to determine the mass per unit area of textiles and fabrics using small samples. Read more

This test measures the light-blocking properties of textiles (typically curtains or drapes) against light passing through them. Testing is performed according to standard AATCC 203. Testing is conducted with … Read more

With tensile testing, the strength of metals and metal extrusion products can be determined. Properties that are deducted from the test data include tensile strength, yield strength, and modulus of elasticity. … Read more

Determination of fatty acid profile from a very small amount (20 mg) of food or feed. Fat extraction is included in the price. Read more

Determination of B and P in Borophosphosilicate glass. Read more

Pyrrolizidine alkaloids are naturally occurring substances produced by various plants as a defense mechanism against insect herbivores. The Scientific Panel on Contaminants in the Food Chain (CONTAM Panel) of EFSA has concluded that there is a possible … Read more

Testing for physical and mechanical properties of toys related to e.g. choking hazards, sharp edges, and loose components. Read more

Acrylamide is a chemical that naturally forms in starchy food products during high-temperature cooking, including frying, baking, and roasting. According to the scientific opinion of the European Food Safety Authority (EFSA), acrylamide exposure might … Read more

The method determines the anion content in the ultrapure water samples using ion chromatography (IC). The analysis includes the determination of bromide (Br-), chloride (Cl-), fluoride (F-), nitrate (NO3-), nitrite (NO2-), phosphate (PO43-), and sulfate (SO42-). … Read more

This measurement determines the spectral transmittance or reflectance of a liquid sample. Based on these properties, the absorbance can be calculated. The wavelength spectrum is from 210 - 380 nm for UV radiation and 380 - 780 … Read more

Testing to determine the resistance to microwave heating of cookware made of ceramic, glass, glass-ceramic, or plastics. The test applies to articles that are intended for multiple uses in a … Read more

The method measures the coefficients of starting and sliding friction of plastic film and sheeting when sliding over the same or another material. The testing procedure is based on the ISO 8295 standard. The … Read more

This test is used to assess the overall migration of compounds from reusable plastic FCMs with food simulant A. According to Regulation (EU) No 10/2011, food simulants A, B, and C are … Read more

This method is used to determine the total moisture of recovered solid fuel samples by drying them in an oven. The test is applicable to all recovered solid fuels. Some matrices might contain VOC … Read more

The analysis is intended for ethanol used as a blending component for petrol. All the parameters mentioned in standard EN 15376 are included in the analysis. Read more

It is a non-destructive technique in which picosecond acoustic pulses penetrate into thin films or nanostructures to reveal internal features such as film thickness as well as cracks, delaminations, and voids. Read more

The impact strength of rigid plastics can be measured with the Charpy and Izod methods. In these tests, a pendulum is used to break the sample specimen. 10 … Read more

The Vicat softening point is the temperature at which a flat-pointed needle penetrates the sample to a thickness of 1 mm when loaded with a 10 N or 50 N load. In the test, the sample is placed in an oil bath that is heated at a rate of … Read more

This test measures the color fastness of textiles in domestic and commercial laundering processes according to the EN ISO 105-C standard. The … Read more

Measurement of roughness or edge sharpness by optical profilometry. Read more

ICP-SFMS measurement package for liquid chemicals. The analysis includes the measurement of the following elements using the high-resolution ICP-SFMS technique: Al, As, B, Ba, Ca, Cd, Co, Cr, Cu, Fe, Hg, K, Mg, Mn, Mo, … Read more

Determination of the grammage of paper, board and corrugated board. Read more

Determination of reducing sugar content, expressed as glucose, from food and feed with the Luff–Schroorl titration method. Read more

Analysis of a single element (Al, Ca, Cr, Cu, Fe, K, Mg, Na, Ni, Zn, etc.). The sample matrix has to be always agreed upon in advance. The matrix might affect the analysis price. Read more

Horizontal method for the detection and enumeration of Enterobacteriaceae (EN ISO 21528). For microbiology analyses, a sample preparation cost of €39 will be invoiced per order. Read more

Quality analysis of a food supplement including the following determinations: Heavy metals (As, Cd, Hg, and Pb), Aerobic microbes, E. coli, Salmonella, Coliform bacteria, S. aureus, Yeasts and molds. Upon request, the … Read more

The biocompatibility of medical devices is generally assessed according to international ISO 10993 standards. We can help with the tests needed for evaluating biocompatibility, including, for … Read more

This test is used for rubber or plastic-coated fabrics to determine their flex resistance in the folded condition. The appearance of the test specimen after a specified number of flex cycles … Read more

Standard DIN 10955 specifies test methods for the sensory analysis of food contact materials and articles that are intended for direct food contact. … Read more

In this abrasion resistance test, the volume loss that a test piece experiences when subjected to abrasive action is measured. A specified grade of abrasive sheet and a non-rotating test piece are used. The result can be reported as a … Read more

Determination of PAH compounds in asphalt samples using the GC-MS technique. The analysis includes the determination of the following compounds: naphthalene [CAS: 91-20-3], acenaphthylene [CAS: … Read more

This method uses the rising height method to determine the suction speed of textiles against water. Read more

The biobased carbon content indicates the proportion of total organic carbon that originates from renewable resources. The analysis includes the removal of inorganic carbon before testing, where necessary. The … Read more

Testing according to the standard EN 14350 for the mechanical and physical properties and safety of drinking equipment intended for … Read more

Determination of yarn shrinkage in cold water by an in-house method. Read more

Determination of the amount of volatile organic compounds (VOC) released by solid or liquid samples. The measurement is performed by placing the investigated sample in a chamber, through which nitrogen … Read more

This test is a combination of two standards that are together used to determine dimensional changes in textiles and clothing after ironing. The results are expressed as percentages (%) … Read more

MMeasurement determines ten common plastic types (PE, PP, PS, ABS, PVC, PET, PC, PMMA, PA6, PA66) with pyrolysis-GC/MS. In the method, microplastics are separated from the sample and reported in µg/l of individual … Read more

Imaging of the sample with transmission electron microscope (TEM). In typical measurement, several images with varying magnifications are taken to get a good overall view of the sample. Read more

Grazing Incidence X-ray diffraction (GI-XRD) measurement of thin films + X-ray reflectometry (XRR) analysis of thin films. Results include density (g/cm³), thickness (nm), and roughness (nm) values. For XRR, the thickness should generally be below 100 nm and … Read more

Determination of antiseptic resistance of textiles by an in-house method. Read more

Determination of the heterotrophic microbial count in water samples according to standard method EN ISO 6222. The results of the analysis will be presented in cfu/ml. Read more

Determination of allergens gluten and gliadin from food, feed, or supplement sample with enzyme-linked immunosorbent assay (ELISA) Read more

This test is used to assess the safety of reusable plastic FCMs when they repeatedly come into contact with foods that can be simulated with food simulant C. According to Regulation (EU) No … Read more

This test is used to determine the effect of artificial daylight (D65) on the color of paper or board. During the test, the sample is exposed to filtered xenon arc light to … Read more

Bulk is the ratio of paper's or board's thickness to its basis weight. Read more

In this analysis, the density of plastics and polymers is determined by the immersion method. The method is suitable for plastic granulates and for products and materials delivered as sheets that can be cut … Read more

Amazon requires a Certificate of Analysis (CoA) for supplements intended for sexual enhancement to prove that the product does not contain any of the following … Read more

The burning rate of vertically mounted materials designed to be used in vehicles and buses must be tested with the UN/ECE R118 annex 8 test before they can be approved for use. Measurlabs … Read more

In this analysis, the surface roughness value (RMS) of the sample is determined with atomic force microscopy (AFM). The price includes three measurement points from the sample. The measurement area is 5 x 5 micrometers, if not agreed otherwise. In … Read more

According to Regulation (EU) No 10/2011, food simulants D1 and D2 are assigned for testing migration into foods that have a lipophilic character and are able to extract lipophilic substances. Food simulant D1 … Read more

Specific migration of 1,3-butadiene [CAS 106-99-0; Ref No 13630; FCM 223] from a plastic food contact material. The compound is listed under FCM 223 in Annex I of European Regulation No … Read more

Determination of allergens from food, feed, or supplement sample with enzyme-linked immunosorbent assay (ELISA). The following allergens are available for analysis: Peanut, Soy protein, Gliadin/gluten, Casein, Cashew, Egg white, Fish, … Read more

Salicylic acid content measurement for biomass or wood-based extract samples. Read more

Determining the content of S, Na, K, Ca, Fe, Cu, Mg, Mn, Si, and P in a wood or pulp powder sample. The sample is microwave-digested using a solution of HF, HNO₃, and HCl before the analysis. The elements are then detected using … Read more

1000 hours of exposure in QUV accelerated artificial weathering, including measurement of L* a* b* color coordinates and calculation of ΔE*ab Read more

Determination of the concentrations of Co, Si, P, S, B, and Na in solid chemicals. This method is meant for chemicals like CoNO3. The results include the concentration of the main component (Co) and the concentrations of … Read more

XPS is a semi-quantitative technique allowing to measure the elemental composition of the surface of materials. In addition, it can also determine the binding state of the atoms. If you wish to perform this test, please ask the … Read more

Analysis of mycotoxin ochratoxin A from food, feed, and supplement products. Regulation (EU) 2023/915 (previously (EC) 1881/2006) sets maximum limits for the amount of ochratoxin A in high-risk food products, including cereals, dried raisins, … Read more

This test indicates the textiles resistance to surface wetting by water. This test can be used for any type of textile or fabric to study surface wetting. However, this … Read more

This method provides the measurement of the specular gloss of paper at an angle of 75° to the normal of the paper surface. Although its chief application is for coated papers, the test may also be used for glossy uncoated papers such as … Read more

Solid state carbon-13 (13C) NMR spectroscopy measurement for solid fine powder samples. The price includes an NMR tube, measurement, and basic data processing. Any possible grinding or ball milling needs to be done before delivering samples to … Read more

During this lignin carbohydrate analysis, the lignin sample is first hydrolyzed, after which the acid-insoluble fraction is filtered and monomeric sugars are analyzed with ion chromatography. Monomeric sugars included in the analysis are glucose, … Read more

Iodine content measurement from solid seaweed samples. Read more

Inhibitory effect of water samples on the light emission of Vibrio fischeri (freshly prepared bacteria) according to ISO 11348-1. Read more

Testing for harmful substances in metal jewelery and watches according to the requirements of REACH Regulation (EC) No 1907/2006. The test package includes the following tests: • Transfer of nickel from jewelry or … Read more

In this test, a vertically oriented test specimen is exposed to a small flame ignition source with a nominal thermal power of 500 W. Together with the horizontal … Read more

Determination of resin acids in a water sample by GC-FID technique. The analysis usually includes the identification of the following compounds: • 13-B-7,9 (11) -abietic acid • 7, 9 (11) -abietic acid • 8,15-isopimaradiene-18-acid • Abietic acid • … Read more

According to Regulation (EU) No 10/2011 materials and articles intended for contact with all types of food shall be tested with food simulants A, B, and D2. With aqueous … Read more

Determination of yarn's boil shrinkage with an in-house method. Read more

The test is used to quantify the microplastics released from textiles during laundering. Microplastic particles are identified and counted using FTIR-ATR and SEM-EDX methods. The analysis is … Read more

This test is used to provide insight into the performance of coated fine papers, adhesion at carton side seams, and more. In the test, a tape is placed on both sides of the test specimen, the sample … Read more

Determination of Chromium-6 (Cr-VI) in soil, sediment, or sludge using an ion chromatographic method according to standard methods EN 15192 and EPA 3060A. The results of the analysis are … Read more

This measurement determines the transmission rate of carbon dioxide (CO2) through a single or multi-layered plastic film or sheeting with an infrared detector. The … Read more

This test can be used to determine the hardness of plastics with the ball indentation or Shore hardness method. The test is performed at room temperature and includes three measurements per sample. Hardness data may be used … Read more

This test is used to determine the breaking force and elongation of fabrics and textiles. This test is not recommended for fabrics with high stretch (over 11%), but it can be used for most other … Read more

This test is used to evaluate the non-combustible properties of construction materials. The test is included in the EN 13501-1 fire classification standard for classifications A1, A2, A1fl, A2fl, A1L, and A2L. During the … Read more

Determination of the hydrogen sulfide (H₂S) content of natural gas or biogas samples. Please contact Measurlabs experts to check the suitability of other sample vessels for the analysis. Read more

In this test, a pyramid-shaped puncture head is used to measure the puncture resistance of a board sample. During this process, combined tensile, compression, flexural, and shear forces occur. The result is given as the … Read more

Testing to determine the blocking resistance of rubber- or plastic-coated fabrics. Read more

X-Ray Fluorescence (XRF) is used to quantitatively determine the following minerals from iron ore: Al₂O₃, CaO, Cr₂O₃, Fe, K₂O, MgO, Mn, Na₂O, NiO, P, S, SiO₂, V₂O₅ and TiO₂. The method used is based on the ISO 9516-1 standard Read more

Overall migration (OM) is the sum of all the compounds that might migrate from the FCM into food. According to Regulation (EU) No 10/2011, food simulants A, B, and C are assigned for foods that have a hydrophilic … Read more

Cannabinoids are a class of terpenes present in the hemp plant, some of which possess various biological properties. Due to this, the levels of certain cannabinoids in food products are controlled under EU regulation. According to Commission Regulation (EU) 2023/915, … Read more

This test determines the tensile properties of plastic films and sheeting. Determinable properties include tensile strength, yield strength, yield strain, strain at break, and modulus of elasticity. Results include the … Read more

The analysis includes the preparation of a cross-section sample using Broad Ion Beam (BIB). After preparation, the cross-section surface is imaged with a Scanning Electron Microscope (SEM). Read more

This gravimetric oil content measurement contains hexane (or light-petroleum) sample extraction. After the extraction, the solvent is evaporated and the … Read more

Determination of the water vapor transmission rate (WVTR) according to standard ASTM F1249. WVTR describes the amount of water vapor that passes through a material or … Read more

Testing for the migration of aluminum, antimony, arsenic, barium, boron, cadmium, chromium (III), chromium (VI), cobalt, copper, lead, manganese, mercury, nickel, selenium, strontium, tin, organic tin, … Read more

1000 hours of exposure in QSUN xenon-arc chamber with filter Daylight Q (daylight SPD) Read more

Method for testing the resistance of domestic articles made from ceramic, glass, glass ceramic, vitreous enamel, metal, and plastics under the … Read more

Skin sensitization testing by the ISO 10993-10 standard is part of assessing the biocompatibility of medical devices. Testing is required for all medical devices that come into contact with the human body … Read more

Determination of particle size distribution (PSD) by dynamic light scattering (DLS). Analysis can be done from dispersions or solids that can be dispersed in water or organic solvents. The method is … Read more

Oil characteristic groups are determined with clay-gel adsorption chromatography by the ASTM D2007 standard method. The quantities of saturated, aromatic, polar, and asphaltene/pre-asphaltene compounds … Read more

SEC-MALS (size exclusion chromatography with multi-angle light scattering) is a polymer analysis method that is used to characterize the molar masses and branching properties of polymers. This analysis gives information about a high … Read more

Nutritional analysis of compound feed or complementary feed intended for cats, dogs, and other furry animals according to the Commission Regulation (EU) 2017/2279. The following parameters are included: • Crude protein • Crude fat • Crude ash • Crude … Read more

Magnetometry provides information on the magnetic properties of the sample material as a function of the magnetic field. A vibrating-sample magnetometer (VSM), also referred to as a Foner magnetometer, is used in the … Read more

Directive 94/62/EC limits the content of heavy metals such that the sum of the concentrations of lead (Pb), cadmium (Cd), mercury (Hg), and hexavalent chromium (Cr (VI)) in packaging or packaging components shall not exceed … Read more

The measurement is performed using a high-resolution ICP-MS technique (ICP-SFMS), which can identify very low elemental concentrations. The measurement includes only the selected element … Read more

This test utilizes an in-house standard to determine the dimensional change in textile, fabric, or clothing articles after a hand wash. Results are expressed in percentages of shrinkage or extension. Read more

IMO 2010 FTP Code Part 9 fire testing assesses the suitability of bedding components for marine use. Test results can be used for type approval (wheel mark). During testing, the ignitability of mattresses, quilts, blankets, … Read more

Analysis package in accordance with the Finnish Ministry of the Environment's sediment dredging and placement instructions. The analysis package includes the following determinations: Dry matter, Heavy metals (As, Cd, Cu, Hg, Cr, Pb, Ni, Zn), Organotin compounds … Read more

Test package for single-use nitrile gloves for food contact compliancy according to BfR XX1/1 and 1935/2004. The … Read more

Measurement determines ten common plastic types (PE, PP, PS, ABS, PVC, PET, PC, PMMA, PA6, PA66) with pyrolysis-GC/MS. In the method, microplastics are separated from the sample and reported in µg/l of individual … Read more

Phase identification and quantification (Rietveld analysis) of a crystalline powder material using X-ray diffraction (XRD). The analysis can also provide unit cell dimensions. The analysis is only suitable for materials with at least one crystalline phase. The … Read more

The European Food Safety Authority (EFSA) has concluded that certain perfluoroalkyl substances (PFAS) such as PFOS, PFOA, PFNA, and PFHxS can cause adverse effects on serum cholesterol, the liver and the immune … Read more

Determination of the acid-insoluble and acid-soluble lignin content of biomass samples. A solid biomass sample is hydrolyzed, and the acid-insoluble residue is filtered out to determine the amount of Klason … Read more

Time-of-flight elastic recoil detection analysis (ToF-ERDA) can be used to measure thin films. It can provide the elemental composition of the material and can be used for depth profiling. Tof-ERDA is capable of detecting all elements and distinguishing between … Read more

Determination of Sb, As, Hg, Cd, Co, Cr, Cu, Pb, Ni, Zn, and V from water samples with the ICP-MS technique. The concentration of … Read more

The flat crush test (FCT) is a commonly used mechanical test conducted on board materials, such as corrugated cardboard. During the test, the sample is loaded perpendicular to its surface. The resistance the board presents to the … Read more

Cytotoxicity tests by ISO 10993-5 are performed to assess the impacts that a medical device has on cell viability. In vitro cytotoxicity tests are necessary for the approval of any medical device that comes into contact with … Read more

A refractometric method for measuring the refractive index of molded parts, casts, or extruded sheets or films, using a refractometer. The test is suitable for isotropic transparent, translucent, colored, opaque, and anisotropic materials. … Read more

Lignin sample ash content measurement at 525°C. The result is expressed as a mass percentage of the ash from the initial sample on a dry matter basis. Read more

Determination of inhalable and respirable dust fractions present in indoor air. The aerodynamic diameters of the inhalable and respirable dust particles are < 100 µm and < 4 µm, … Read more

A test method to determine the mass per unit area of nonwoven textiles and fabrics by using small samples. Read more

Ellipsometry is an optical technique that characterizes polarized light reflected from a sample's surface. The thickness or the refractive index of the layer can be measured with this technique. This ellipsometry measurement is used to characterize thin films … Read more

The smoothness of a paper or board sample is determined with the Bekk method. This test is recommended especially for smooth grades and is not recommended for samples over 0.5 mm thick or very permeable papers. The results … Read more

The Finnish Government Decree on the Recovery of Certain Wastes in Earth Construction … Read more

This test is used to determine the quantity of acid-insoluble ash in paper, board, or pulp samples. Testing is performed according to the ISO 776 standard. Read more

Solvent purity assay with GC-FID and Karl Fischer techniques . Determination is performed by analyzing the sample with GC-FID and comparing the … Read more

Surface energy determination using contact angle measurements. Read more

British Pharmacopoeia standard measurement for alginate raft-forming oral suspension's raft strength. Read more

The osmolality of liquid samples is determined using a freezing point osmometer. Osmolality defines the number of osmols per kilogram of liquid. Osmolality reflects the total number of dissolved ionic and molecular compounds present in a kilogram of the solution. … Read more

Nutritional value testing package for alcoholic beverages, including the following parameters: Proteins, Fat (incl. saturated fat), Carbohydrates (incl. sugars), Salt (2.5 x Na), Ethanol content, Energy calculation. While it is not … Read more

The biocompatibility of face masks must be analyzed if the materials of the face masks have not been previously tested for cytotoxicity and dermal irritation, and accepted to be used … Read more

Determination of metal concentrations on ALD thin films using LA-ICP-MS. The measurement includes the analysis of the following elements: Ag, Al, As, Au, B, Ba, Be, Bi, Br, Ca, Cd, Ce, Co, Cr, Cs, Cu, Dy, Er, Eu Fe, Ga, Gd, Ge, Hf, … Read more

Pentachlorophenol (PCP, CAS 87-86-5) is a compound that is used as a pesticide and a wood preservative. This analysis is used to determine the pentachlorophenol content in an aqueous … Read more

Determination of the resistance of thread systems of woven fabrics to slippage at a sewn seam. This method is suitable for all upholstery and apparel fabrics and stretch fabrics. Read more

Determination of the amount of toluene and xylenes in solid or liquid samples. The measurement is performed using gas chromatography. Xylene is analyzed as total xylene, i.e. the result is expressed as the sum of all three isomers. Read more

This testing method is used to determine the moisture content of paper or board in standard RT conditions (23 °C/ 50 % RH). The measurement is performed after exposing the sample to these conditions for a minimum of 4 hours. Read more

Testing for the release of primary aromatic amines (PAA) classified as CMR 1A or 1B according to Regulation (EC) No 1272/2008. Extraction is performed with either cold water (EN 645) or hot water (EN 647). … Read more

Determination of water-soluble fluoride in solid matrices. The fluoride is extracted from the dried sample with water in a single-stage shaking test at room … Read more

Nutrient measurement package for soil, sludge, or sediment … Read more

Quantification of NH₃ (ammonia) and H₂O (water) in natural- and biogas samples. The analysis should be performed as soon as possible after sampling for accurate analysis results. Read more

Caffeine content determination for natural (e.g. tea, coffee) and fortified sources (e.g. soft drinks), cosmetics, and other suitable matrices. Read more

Quantification of CH₄ (methane), CO₂ (carbon dioxide), O₂ (oxygen), N₂ (nitrogen), H₂ (hydrogen), H₂O (water), and C2-C5 alkanes in natural gas and biogas samples with gas … Read more

Identification of chemical groups in aqueous solutions using Fourier-transform infrared spectroscopy (FTIR). Results will be delivered as raw data and spectra. A batch includes the analysis of … Read more

MFFT is the lowest temperature at which a latex, emulsion, or adhesive will uniformly coalesce when laid on a substrate as a thin film. An accurate MFFT value allows the formulation of products that … Read more

This test is used to indicate the textile's oil stain resistance, more specifically its resistance to wetting by hydrocarbons. A series of selected liquid hydrocarbons with different surface … Read more

In this test, the grease resistance of paper is evaluated using castor oil, n-heptane, and toluene mixtures as per the TAPPI 559 standard. A drop of the test liquid is dropped on the paper, and after 15 seconds the … Read more

This contaminant screening of a food supplement includes the following determinations: Heavy metals (As, Cd, Hg, and Pb), Aflatoxin B1, B2, G1, G2, … Read more

This test is used to determine the puncture properties of rigid plastics. During the test, a flat sample specimen is punctured by a falling impact object (from 1 m at a speed of 4.4 m/s) at a standard speed while the force … Read more

Amazon requires a Certificate of Analysis (CoA) for supplements intended for weight loss and weight management to prove that the product … Read more

Radiocarbon dating is an analytical technique for analyzing the age of biological and organic materials such as fossils and very old objects. Some carbon-containing inorganic samples can be analyzed as well. The method is suitable for samples that are older than the 18th … Read more

The Finnish Government Decree on Landfills (331/2013) requires a specific set of analyses to be performed on waste materials before their disposal in a landfill. Analyses for … Read more

Secondary ion mass spectrometry (SIMS) is a depth profiling method that can be used for a wide variety of solid materials to determine impurities or dopants. All elements from hydrogen to uranium can be detected. Standards are needed to get … Read more

Method for testing the resistance of domestic articles made from ceramic, glass, glass ceramic, vitreous enamel, metal, and plastics under the … Read more

In SEM imaging, several images with varying magnifications are taken to get a good representative view of the sample surface. The resolution is higher than in traditional microscopy. Read more

Determination of the oil and grease content of a water sample by the method SFS 3010 (mod.). Results are expressed in mg/l. The results include the total amount of hydrocarbons, mineral oils, and calculated fat … Read more

Colorfastness describes a textile's ability to retain its original color when exposed to different types of chemical, mechanical, or environmental stress. We offer color fastness … Read more

Standard EN 590 outlines the testing requirements and methods for diesel fuel quality testing. The following tests … Read more

Overall migration (OM) is the sum of all the compounds that might migrate from a food contact material into food. According to Regulation (EU) No 10/2011, food simulants A, B, and C are assigned for foods that … Read more

Analysis package of biogenic amines for food and feed. The package includes the determination of the following substances: Tryptamine [CAS: 61-54-1], Phenylethylamine [CAS: 64-04-0], Putrescine [CAS: 110-60-1], Cadaverine [CAS: 462-94-2], Histamine [CAS: 51-45-6], … Read more

Determination of selected PFAS compounds using the LC-MS technique. The analysis package includes the determination of 22 substances including Perfluorooctane sulphonic acid (PFOS), Perfluorooctanoic acid (PFOA), and … Read more

With the DIN 53830-3 standard, the linear density of single and plied yarns can be determined using the short-length method. The method applies to simple, plied, and textured yarns. Read more

Standards EN 1230-1 and EN 1230-2 specify the testing procedure for assessing the odor and flavor released by food contact materials made of paper or board. This analysis applies … Read more

This analysis is used to determine the gross calorific value (the heating value) of a solid biofuel at constant volume and the reference temperature of 25°C in a bomb calorimeter calibrated by combustion … Read more

Chromatographic analysis of 16 PAH compounds, listed as high-priority pollutants by US EPA. The analyzed PAH compounds are: Naphthalene (CAS: 91-20-3), Acenaphthylene (CAS: 208-96-8), Acenaphthene (CAS: … Read more

Determination of selected metals (Al, As, Cd, Co, Cr, Cu, Fe, Hg, Mn, Ni, Pb, Zn, V) in oil or solvent samples using high-resolution ICP-MS (ICP-SFMS) technique. … Read more

Analysis of mycotoxins T-2 and HT-2 from food, feed, and supplement products. EFSA has found T-2 toxin and HT-2 toxin to be commonly present in products including oats, cereal flakes, bread, and certain supplements. Indicative levels that should not … Read more

Vickers hardness is used to assess a material's ability to resist plastic deformation from a standard source. Vickers hardness testing is suitable for all metals. In the test, a standard-sized test head is pressed against the sample and … Read more

Analysis of aflatoxin B1, B2, G1, and G2 in food, feed, and supplement products. Aflatoxins are mycotoxins produced by certain Aspergillus fungi. According to EU food contaminant regulations, materials that potentially … Read more

The sample cross-section is prepared with a focused ion beam (FIB) and then imaged with a high-resolution transmission electron microscope (HR-TEM). The resulting image resolution is very high, … Read more

This test is a combination of three ISO standards that are together used to asses dimensional changes in textiles after domestic … Read more

The measurement determines the content of dissolved silicon in ultrapure water using a UV-Vis spectroscopy (molybdenum heteropolyblue method). The silicon detection limit is 0.7 ppb. The sample must be collected in a suitable sample container … Read more

Determination of calcium (Ca), phosphorus (P), sodium (Na), magnesium (Mg), zinc (Zn), manganese (Mn), copper (Cu), selenium (Se), and cobalt (Co) in food samples with the ICP-MS-technique. Other elements can be added to the analysis package if needed. The price … Read more

Surface flammability testing by IMO 2010 FTP Code Part 5 is to be performed on surface materials to assess their suitability for use in shipbuilding. The specimen is inserted in the specimen holder together with a … Read more

This test determines the coating adhesion strength of coated fabrics. Knowing the adhesion strength of the coating to the fabric is important, because poor adhesion strength may often result in the failure of the product. Read more

Determination of the degree of curl of paper or board by using a vertically suspended test piece as per standard ISO 11556. Curl is defined as deviation from a flat surface. … Read more

The term bioburden describes the presence of microorganisms on a product, raw material, or surface. Bioburden testing has an important role in the quality control of medical devices, … Read more

This method is used to determine the flat crush resistance of a corrugating medium after being fluted to A-flute geometry with a laboratory fluting device. The Concora corrugating medium test can be used for any corrugating medium that … Read more

This test utilizes an in-house standard to determine the dimensional change in textile, fabric, or clothing articles after being exposed to cold water. Read more

SCT (short-span compression test) is one of the most commonly used testing methods for determining the compression strength of paper or cardboard. In this test, the sample is conditioned in standard conditions (23 … Read more

Determination of the zeta potential of the particle-solvent interface. Analysis can be performed on dispersions or solids that can be dispersed in water or organic solvents. Read more

This test is used to measure the tensile strength and elongation of paper or board in the machine direction (MD) and the cross direction (CD). Even small variations in tensile strength can affect the functionality of the product. … Read more

Specific migration of mineral oil hydrocarbons (MOH), including mineral oil saturated hydrocarbons (MOSH) with polyolefin oligomeric hydrocarbons (POSH) and mineral oil aromatic hydrocarbons (MOAH) from … Read more

The Finnish National Regulation 268/1992 (CTM) applies to contact materials manufactured in Finland or imported directly from third countries which do not have harmonized EU legislation. … Read more

XRF is a quantitative and qualitative method that can be used to analyze solid and liquid materials. This method is intended for a standard screening of homogeneous materials that do not … Read more

This test utilizes an in-house standard to determine the dimensional change in textile, fabric, or clothing articles after being exposed to dry air. Read more

This test indicates the textiles resistance to surface wetting by water. This test can be used for any type of textile or fabric to study surface wetting. However, this test cannot be … Read more

Determination of the flexural properties of rigid and semi-rigid plastics and composite materials using three-point bending tests according to ISO 178. … Read more

Specific migration testing of epoxy derivatives used in the manufacturing of epoxy resins and polycarbonate plastics. EU legislation bans the use of some epoxy derivatives in food … Read more

This test determines the change in skewness in woven and knitted fabrics or twist in garments upon being subjected to repeated automatic domestic laundering procedures. Read more

With the measurement the contents of 36 elemental impurities can be measured from ultra-pure water with ICP-MS. The measurement includes the following elements: Al, Sb, As, Ba, Be, Bi, B, Cd, Ca, Cr, Co, Cu, Ga, Ge, Au, Fe, Pb, Li, Mg, Mn, … Read more

Multiple methods to determine paper's or board's roughness exist. The most typical tests are: - The Bendtsen method (ISO 8791-2) - For papers and boards that have a Bendtsen value between 5 and 3000 ml/min. Not suitable for papers with high air permeability. … Read more

Time of flight - secondary ion mass spectrometry (ToF-SIMS) is an analytical technique that provides information about the extreme surfaces of solid materials. It can be used for elemental and molecular analysis as well as surface mapping. It can also be used as a … Read more

This test is used to determine the compression properties of rigid and semi-rigid plastics according to the ISO 604 standard. A range of test speeds and specimen dimensions are included in the standard method. For comparative results, … Read more

The basic analysis package for manure or compost includes the analyses listed below: • Specific weight • Dry matter • Soluble Nitrogen • Total Nitrogen • P, K, Ca, Mg, Na, Cu, Mn, Zn and B Manure samples should be taken within 1 to 2 weeks of … Read more

This method is used to study the tensile properties of isotropic and orthotropic fiber-reinforced plastic composites according to the ISO 527-4 standard. Read more

Qualitative nanoparticle analysis determines if the sample includes particles with a size < 500 nm. Results include several SEM images containing both overview images and images of the … Read more

Nano Scratch Test of thin film samples. Typical measurement includes overview image of the scratch track (surface damage) and determination of critical load values. Read more

The grease resistance of paper and board is determined by establishing the time taken for a simulated “fat material” (palm kernel oil) to penetrate (break through) the sheet of paper or board. … Read more

The analysis is used to detect the concentrations of Mn, Si, P, S, B, and Na in solid chemicals. Suitable sample materials include MnNO3, from which the concentration of the main component (Mn) and the select impurities are … Read more

The pin adhesion test measures the bond strength between the corrugated medium and the liner. It is used to analyze the strength of adhesives. Upon request, the measurement can be performed on … Read more

Contaminants detected by light filth analysis include insect fragments, animal hair, whole insects, and other extraneous material such as feather barbules, mites, metal, rubber, plastic, and paint chips. Read more

BET (Brunauer–Emmett–Teller) analysis to determine specific surface area and pore size of solid materials. Read more

This test is used to evaluate the strength of a glue bond in corrugated cardboard after being immersed in water. This test is especially useful for applications where a high degree of resistance to wet … Read more

This abrasion resistance test with the Martindale method is used to determine the specimen abrasion breakdown by inspection at fixed intervals. All uncoated textile fabrics can be tested. Read more

Determination of urine resistance of textiles by an in-house method. Read more

This test measures the textile's resistance to water with the hydrostatic pressure method according to AATCC 127 standard. During the test, one surface of the sample is subjected to hydrostatic pressure, which is increased at a … Read more

This test determines the resistance of color of all kinds of textiles to artificial natural daylight (D65) up to note 6 of standard ISO 105-B02. Read more

Analysis of the sugar content of seaweed-based solution samples. First, free monomeric sugar components are determined from the solution using ion chromatography. Then, the sample is acid hydrolyzed and the monosaccharide components are analyzed … Read more

Water vapor transmission rate testing is used to evaluate the breathability of textiles. The ASTM E96 test measures the amount of water vapor that passes through the fabric in a controlled environment. The … Read more

Determination of primary aromatic amines (PAAs) from an aqueous extract of paper and board using reference method EN 17163. The analysis is available for cold and hot water … Read more

Content of polycyclic aromatic hydrocarbons in a paper or paperboard sample intended as a food contact material. Read more

Quantification of siloxanes in biogas or natural gas samples with gas chromatography: • Hexamethyltrisiloxane (D3) • Octamethylcyclotetrasiloxane (D4) • Decamethylcyclopentasiloxane (D5) • Dodecamethylcyclohexasiloxane (D6) • … Read more

This method determines the tearing resistance of low-grammage paper or board with the Elmendorf method. During the test, an initial cut is made on the test specimen. This cut is then torn for a given distance using a pendulum. The work required to tear the … Read more

This test is a modification of the ISO 7211-2 standard and it gives the number of threads per unit length of textile woven fabrics. Read more

The test determines the ash content of paper, board, and pulp upon being ignited at 525 °C. The results express the mass of the inorganics in your sample. Read more

Determination of fatty acid profile of crude lipid extract, fats, or oils with GC-MS or GC-FID. For other matrices, an additional fee for lipid extraction will be applied. The measurement includes the determination … Read more

Paper or paperboard that comes into contact with food must not release processing aids that have an antimicrobial effect on food. The requirement is outlined, for example, in German BfR … Read more

2D NMR spectroscopy provides more information about the structure of a molecule than one-dimensional NMR and is especially useful in the analysis of larger and more complicated molecules. Some of the most common 2D NMR experiments include COSY, TOCSY, ROESY, NOESY, HMBC, … Read more

Nutritional content should appear on the label of almost every packaged food. Food Information Regulation (EU) 1169/2011 … Read more

Specific migration of poly((R)-3-hydroxybutyrate-co-(R)-3-hydroxyhexanoate) (PHBH, CAS 147398-31-0; FCM 1059) from a plastic food contact material. The … Read more

Measurement determines ten common plastic types (PE, PP, PS, ABS, PVC, PET, PC, PMMA, PA6, PA66) with pyrolysis-GC/MS. In the method, microplastics are separated from the sample and reported in µg/l of individual polymer types … Read more

This analysis is used to determine the carbohydrate content of seaweed-based samples. A solid sample is hydrolyzed, the acid-insoluble residue is filtered out, and monosaccharide components are analyzed using ion chromatography. Ash content is determined … Read more

According to Regulation (EU) No 10/2011, ammonium salts of authorized acids, alcohols, and phenols are authorized in the same way as specified metals. Hence, ammonium is also included in point 1 of Annex II with an SML … Read more

XPS depth profiling is the alternating between ion gun etching cycles and XPS analysis cycles. The technique provides semi-quantitative information on the elemental composition (at.%) as a function of depth. The … Read more

Chemical characterization by the ISO 10993-18 standard is performed to identify the constituents of a medical device and to estimate and control the risks associated with its chemical … Read more

This test is designed to measure the water vapor transmission rate (WVTR) of packages, such as cups, bottles, trays, and containers. The analysis includes three replica … Read more

Materials for maritime use are tested according to the IMO 2010 FTP Code (International Maritime Organization Fire Testing Procedures Code). Results can be used for type approval (wheel mark). Part 1 of the code describes the … Read more

This test determines the 2-point bending resistance of paper or board by using a Taber-type tester. The bending resistance at 15° or 7.5° can be determined and expressed in terms of the bending … Read more

Glow Discharge Optical Emission Spectroscopy (GD-OES) is a quantitative technique used to profile the elemental composition of a sample in depth. It is mainly used for quick depth profiling of thick materials, thus providing their elemental composition as a depth profile. It is commonly … Read more

Determination of yarn shrinkage in dry air by an inhouse method. Read more

The Finnish Government Decree on Landfills (331/2013) requires the producer or holder of waste materials to provide the landfill operator with … Read more

Recyclability testing of paper and cardboard according to the CEPI recyclability laboratory test method (version 2, October 2022). Testing includes: Disintegration, Filtrate analysis, Determination of the coarse reject, Determination of the … Read more

Determination of hydrogen peroxide (H₂O₂) concentration of aqueous solutions. Determination is performed using titrimetric method with potassium permanganate solution. Read more

The gravimetric dish method can be used to determine the water vapor transmission rate (WVTR) of materials that have a high water vapor … Read more

Primary aromatic amines (PAA) are a class of compounds that are generated when residual isocyanate groups in food contact materials react with the water in foods. Certain PAAs are known carcinogens, and these are … Read more

Amazon requires a Certificate of Analysis (CoA) for supplements intended for sports nutrition to prove that the product does not contain any of the following … Read more

Determination of fiber melting point using the Kofler bench. The maximum testing temperature is 260 °C. Read more

Imaging of the sample using a scanning electron microscope (SEM) with energy-dispersive X-ray spectroscopy (EDX or EDS). In a typical measurement, several images are taken with varying magnifications to get a good overall view of the sample surface. Read more

This test assesses the specific migration of 1,4-butanediol [CAS 110-63-4; Ref No 13720/40580; FCM 254] from a plastic sample intended as a food contact material. Listed as FCM 254 in European Regulation No … Read more

This test is used to assess the reaction of building products (excluding flooring) to fire when exposed to a thermal attack by a single burning item (SBI). In the test, the spread of flames and smoke is … Read more

This test is used to determine the crease recovery angle of textiles. Read more

Cross-sectional high-resolution TEM-EDX with focused ion beam (FIB) preparation is a powerful combination of sample preparation and imaging techniques. A cross-section of the sample is prepared with a … Read more

Determination of Length Weighted Geometric Mean Diameter (LWGMD) using an SEM-based method adapted from EU Commission Regulation (EC) No 761/2009. The price includes the pressing of the sample at 10 MPa. A test … Read more

Burst strength measures the maximum hydraulic pressure that the sample withstands without breaking. Paper's or board's burst strength is the most commonly used test value alongside SCT (short-term compression strength ). With this test, you will … Read more

The Kappa number describes the lignin content or bleachability of pulp. With this test, the kappa number is determined as per the ISO 302 standard, which applies to all kinds of chemical and … Read more

Accredited testing of the blood splash resistance of face masks according to EN 14683 standard. Read more

The nutritional content should appear on the label of almost every packaged food. Food Information Regulation (EU) 1169/2011 … Read more

The determination of moisture content in solid recycled fuels contains a gravimetric measurement of the sample prior to drying in an oven and after it. All evaporated content may not be … Read more

Microplastics analysis with µRaman directly from a filter. Analysis of solid sample (3D imaging Raman). Read more

Simulated distillation (SimDist or Simdis) according to the ASTM D7169 standard helps determine the boiling point of petroleum fractions. Sample needs to be soluble to CS2. … Read more

In this test, a horizontally oriented test specimen is exposed to a small flame ignition source with a nominal thermal power of 50 W after being conditioned as per the UL 94 standard. This test is used to classify … Read more

This method is used to determine the opacity (paper backing) of paper by diffuse reflectance. The test is suitable for papers and boards that contain fluorescent whitening agents, as long as the UV content of the radiation incident on the test … Read more

Identification of certain aroma compounds by the GC-MS technique. The method is based on comparing the GC-MS signal to the corresponding isotopically labeled standard for each aroma compound. Examples of identifiable compounds: • … Read more

1H NMR spectroscopic measurement for samples that can be readily dissolved in deuterated solvents. The price includes sample preparation, deuterated solvent (D₂O, DMSO-d, or CDCl₃), NMR tube, measurement, and basic data processing. The processed spectrum is delivered … Read more

This antibacterial activity test can be used for all textile products, including nonwovens. The method is also applicable to textiles that have been treated with antibacterial agents. Read more

Analysis of dioxins and PCBs (dioxin-like substances) as defined by the World Health Organization (WHO). The analysis package contains the following determinations: TEQ-WHO values: Dioxins, Dioxin-like PCBs, Dioxins + … Read more

The method is used to determine aromatic and olefinic hydrocarbon, oxygenate, and calculated oxygen amounts in gasoline. Other … Read more

Determination of osmolarity of liquid samples using a freezing point osmometer. Osmolarity defines the number of osmols per liter of liquid. Osmolarity reflects the total number of dissolved ionic and molecular substances present in the solution in molarity. The … Read more

Karl Fischer titration is a classic titration method in chemical analysis that uses coulometric or volumetric titration to determine trace amounts of water in a sample. Read more

Determination of amino acids from waste water. The analysis includes the determination of the following amino acids: • Alanine • Arginine • Asparagine • Aspartate • Citrulline • Cystine/Cysteine* • Glutamate • Glutamine • Glycine • Histidine • … Read more

Air permeability is an important property for some paper grades, such as paper bags that are filled industrially. Measurlabs offers air permeance testing with the Bendtsen and Gurley methods. The Bendtsen method (ISO 5636-3) is suitable for papers … Read more