Single crystal XRD

Measurlabs offers tailor-made analysis packages for unidentified samples. Our experts will formulate the needed analysis package based on the information provided by the customer. The formulated package aims to provide sufficient information to identify the sample components and their quantities. Most typically, the following methods are used to analyze unknown substances: CHNOS elemental analysis and TGA: These methods will provide information on the sample composition, mainly if the sample is organic or inorganic and if it has one or more constituents. XRD, XRF, ICP, and IC: These methods will be used to provide more detailed qualitative and quantitative information on the inorganic constituents of the sample. 1H & 13C NMR, and GC/HPLC-MS: These methods are used to identify and quantify organic constituents. Our whole analysis catalog can be used to analyze the sample if required. Please contact our experts to start building the unknown sample analysis package designed specifically for your needs. Please also note that the stated required sample amount is the preferred amount. Analysis of smaller sample quantities can also be conducted.

Determination of hydroxyl group (-OH) content in lignin samples by 31P NMR. The method is suitable for lignin that has or might have free hydroxyl groups. The lignin is dissolved in a deuterated solvent (typically CDCl3:Pyridine), and an internal standard is added to the sample. Then, the hydroxyl groups in the sample + internal standard are phosphorylated, and the mixture is analyzed using 31P NMR. The number of free hydroxyl groups can be determined from the NMR spectra by comparing the phosphorus signal of the internal standard to the phosphorus signals of the phosphorylated sample material. The following OH-groups can be quantified (in mmol/g): Aliphatic OH, Phenolic OH, Carboxylic acid , Syringyl OH, Guaiacyl OH, Catechols, p-hydroxyphenyl OH, Total OH. The price can depend on whether your samples require specialized deuterated solvents or preparation conditions (i.e. high temperature or long dissolution time).

High-resolution mass spectrometry (HRMS) is an analytical technique for determining the exact molecular masses of various compounds. The high accuracy makes HRMS ideal for the identification of molecular structures, ranging from small organic molecules to large biological macromolecules. Sample requirements: Information regarding the solubility of the sample in common high-performance liquid chromatography (HPLC) solvents (e.g., H2O, methanol, acetonitrile) or other solvents should be provided., 0.1% formic acid is used as an additive in the test. It is essential to confirm the sample's stability in this acid., Providing the expected molecular weight of the analyte(s) and molecular structure of the sample as a ChemDraw file is beneficial.. Measurement details: Scans can be performed in both positive (+ve) and negative (-ve) ion modes., An ACQUITY RDa Detector is utilized for detection..

Magnetometry provides information on the magnetic properties of the sample material as a function of the magnetic field. A vibrating-sample magnetometer (VSM), also referred to as a Foner magnetometer, is used in the measurement. According to Faraday’s Law of Induction, a changing magnetic field will produce an electric field, which can be measured to obtain information about the magnetic field. Some of the properties that the VSM can measure include magnetic moment, coercivity, and hysteresis loop. Magnetometry is suitable for thin films, bulk materials, liquids, or powders. Projects are priced on a case-by-case basis, with lower per-sample prices for large sample sets. Please contact us for a quote.

Volumetric (static) or dynamic (pulse) chemisorption analysis by CO or H2. The method is mainly used to determine catalyst activity and active sites. When coupled with TPX (temperature programmed experiments, TPO, TPR, TPD), this method can give information about adsorbed species and surface species. Chemisorption can also be conducted with other reactive gases, please contact us for more information.

Diesel exhaust fluid (DEF) is an additive used in diesel-powered vehicles to help the catalytic reduction of nitrous oxides. Thus, the use of AdBlue and other exhaustive fluids improves ambient air quality. DEF testing package according to ISO 22241:2019 includes the measurements listed below: Urea content (ISO 22241-2C), Density at 20 °C (EN ISO 12185) , Refractive index at 20 °C (ISO 22241-2C), Alkalinity as NH₃ (ISO 22241-2D), Biuret (ISO 22241-2E), Aldehydes (ISO 22241-2F), Insoluble matter (ISO 22241-2G), Phosphate (ISO 22241-2H), Determination of Al, Ca, Cr, Cu, Fe, K, Mg, Na, Ni, and Zn content (ISO 22241-2I).

This test is used to evaluate the color fastness of dyed or printed paper or board that is intended to come into contact with food. The applied simulants are Olive oil, 3% acetic acid, Alkaline salt solution (saliva simulant), Distilled water. Color transfer is assessed against a greyscale according to standard EN 646.

X-Ray Reflectometry (XRR) analysis is used to measure the density (g/cm3), thickness (nm), and roughness (nm) of thin films. The method is applicable to the characterization of single- or multilayered thin films, as it provides information on the thickness and density of individual layers of the sample material as well as the roughness of the interphases. Greatest accuracy for XRR thickness measurements is generally achieved for samples containing 1-150 nm thick surface layers with under 5 nm RMS roughness. Thicker films and coatings with rougher surfaces can also be characterized, but the accuracy of thickness determination decreases as the thickness and roughness of the film or film stack increase. >150 mm wafers are typically cut to fit the sample holder. Please let us know if you need testing for larger wafers that cannot be cut into pieces. The available temperature range for XRR measurements is 25-1100 °C, and crystallinity can be studied as a function of temperature. The measurements can be performed under a normal atmosphere, inert gas, or vacuum. Measurements are typically performed using one of the following instruments: Rigaku SmartLab, Panalytical X'Pert Pro MRD, Bruker D8 Discover. Please let us know if you have a preference for a specific instrument.

Analysis to screen a material for the presence of brominated fire retardants (BFRs), including polybrominated biphenyls (PBBs) and polybrominated diphenyl ethers (PBDEs). The test is performed with a pyrolysis gas-chromatography mass spectrometer (py-GC-MS) according to the ISO 7270-1 standard. The sample is pyrolyzed, which is followed by separation and identification with GC-MS. The obtained pyrogram is then compared to a blank sample that does not contain any brominated fire retardants. We also offer the analysis for electrotechnical products as per IEC 62321-6. Please ask our experts for more information about this option.

BET (Brunauer–Emmett–Teller) analysis to determine the specific surface area of solid materials.