Dissolved silicon in ultrapure water

This metal screening analysis includes the semi-quantitative determination of 70 elements. The method can be used, for example, to determine the background concentrations of metals in environmental samples or to study the elemental distribution of unknown samples. Screening is also often performed to assess which metals should be analyzed by a quantitative method. The measurement is performed using a high-resolution ICP-MS technique (ICP-SFMS), which can identify very low elemental concentrations. A semi-quantitative determination of the following elements is included: Ag, Al, As, Au, B, Ba, Be, Bi, Br, Ca, Cd, Ce, Co, Cr, Cs, Cu, Dy, Er, Eu, Fe, Ga, Gd, Ge, Hf, Hg, Ho, I, Ir, K, La, Lu, Mg, Mn, Mo, Na, Nb, Nd, Ni, Os, P, Pb, Pd, Pr, Pt, Rb, Re, Rh, Ru, S, Sb, Sc, Se, Si, Sm, Sn, Sr, Ta, Tb, Te, Th, Ti, Tl, Tm, U, V, W, Y, Yb, Zn and Zr. However, please note that some elements may not be determinable due to matrix interference. During this semi-quantitative analysis, the instrument is calibrated for about 30 elements. The rest of the analytes are quantified using sensitivity factors for calibrated elements with similar mass and first ionization potential, considering isotope abundances. Quantitative analysis is also available at an additional price. During this analysis, all elements are calibrated (excluding halogens and Os). Please ask for an offer for this service.

Determination of Be, Ba, Co, Al, Mg, Cu, Li, Mn, Ag, Sn, Ti, V, Zn, Tl, B, Hg, Mo, Fe, Ca, K, U, P, Cd, Na, Cr, Ni, Pb, Sb, As, and Se in water samples with ICP-MS-technique. The sample is homogenized and acidified (HNO3), after which the analysis is performed from the liquid phase. The displayed price applies to natural waters. (for example, river or lake water) If the sample contains a lot of solids or the matrix is significantly different from natural water (for example, wastewater and industrial waters), different analysis methods need to be used. The concentration of each element is reported in µg/l.

Determination of 36 elements in ultra-pure water with the ICP-MS technique. The measurement includes the following elements: Al, Sb, As, Ba, Be, Bi, B, Cd, Ca, Cr, Co, Cu, Ga, Ge, Au, Fe, Pb, Li, Mg, Mn, Mo, Ni, Nb, Pt, K, Ag, Na, Sr, Ta, Tl, Sn, Ti, W, V, Zn, and Zr. The expected LOQ varies from 0.001 to 0.009 ppb, depending on the element and the exact sample matrix. Samples must be collected in suitable containers designed for ultrapure water. Measurlabs can provide the required sample vessels.

We have various testing services available for ultrapure water. Pricing depends on the selected parameters and the number of samples. Please contact Measurlabs to get an offer. Note that we will provide suitable shipping containers based on the analyses that are ordered. Trace elements by ICP-MS For the determination of elemental impurities, we offer a basic 36-element and an extended 67-element package. The basic package includes the following 36 elements: Li, Be, B, Na, Mg, Al, K, Ca, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Ga, Ge, As, Sr, Zr, Nb, Mo, Ag, Cd, Sn, Sb, Ba, Ta, W, Pt, Au, Tl, Pb, and Bi. The extended analysis includes the following elements in addition to the basic package: Ce, Cs, Dy, Er, Eu, Gd, Hf, Ho, In, Ir, La, Lu, Hg, Nd, Os, Pd, Pr, Re, Rh, Rb, Ru, Sm, Sc, Se, Te, Tb, Th, Tm, U, Yb, and Y. Reporting limits depend on the element and specific sample matrix, but typically vary between 0.001 ppb and 0.6 ppb. For this analysis, samples must be delivered in Teflon containers. Hardness Hardness value can be calculated based on the ICP-MS results. Silicon and silica (Si, SiO2) Our service catalog includes the determination of total, dissolved, and colloidal silica (SiO2). Total silicon is analyzed using the ICP-OES technique, and dissolved silicon by UV-VIS (molybdenum heteropoly blue method). Colloidal silica is calculated as the difference between total silica and dissolved silica. Total organic and inorganic carbon (TOC and TIC) We offer TOC determination for ultrapure water samples with a 5 ppb quantification limit. For this analysis, samples must be delivered in certified 40 ml TOC vials. Total inorganic carbon (TIC) analysis can also be performed using a TOC analyzer. Anions by ion chromatography (IC) For anions, we have a basic package and a separate package for organic anions. The basic package includes the following anions: bromide(Br⁻), chloride (Cl⁻), fluoride (F⁻), nitrate (NO₃⁻), nitrite (NO₂⁻), phosphate (PO₄³⁻), and sulfate (SO₄²⁻). Analysis of organic anions includes: acetate, formate, glycolate, propionate, and butyrate. Reporting limits depend on the anion and sample matrix, but typically vary between 0.02 and 1 ppb for basic anions and are around 25 ppb for organic anions. For this analysis, samples must be delivered in HDPE bottles. Cations by ion chromatography (IC) The analysis package for cations includes the determination of the following cations: ammonium (NH4+), calcium (Ca2+), lithium (Li+), magnesium (Mg2+), potassium (K+), and sodium (Na+). Reporting limits typically vary between 2 ppb and 5 ppb. Samples must be delivered in HDPE bottles. PFAS compounds (24 compounds) Analysis includes PFOS, PFOA, PFNA, PFHxS, and 20 other selected PFAS compounds. The complete list of compounds can be provided upon request. The reporting limit is typically 1 ng/L. The sample must be delivered in a plastic PFAS-free bottle, preferably made from HDPE.

ICP-OES measurement package for soil, sludge, or sediment samples. Pre-treatment of the sample with aqua regia decomposition is included in the price. The following elements are quantified using the ICP-OES technique: Ag, As, Ba, Be, Cd, Co, Cr, Cu, Fe, Hg, Li, Mn, Mo, Ni, Pb, Sb, Sn, Sr, Tl, V, and Zn. The concentrations are expressed in mg/kg d.m. Also, nutrient measurement package for soil, sludge, or sediment samples using the ICP-OES method. This package includes the analysis includes the pre-treatment of the sample with aqua regia decomposition and the measurement of the following elements using the ICP-OES technique: Al, B, Bi, Ca, K, Mg, Na, S, Se, Si, Te, Ti, and Zr. The analysis is also available with an express turnaround time. Ask our experts for more information. More specific packages, such as heavy metals or nutrients, can also be provided for soil, sediment, or sludge samples.

Determination of carbon, hydrogen, nitrogen, sulfur, and oxygen content of an organic sample. CHNS analysis (”LECO analysis”) is performed using a flash combustion method, where the sample is combusted under 25 kPa of O2 at an elevated temperature (1,000 °C), followed by gas chromatography separation and detection using a thermal conductivity detector. Oxygen is analyzed by reduction on granulated carbon at 1480 °C, utilizing high-temperature thermal decomposition and conversion of oxygen into carbon monoxide before gas chromatography separation and detection with a thermal conductivity detector. The sample can be either solid or liquid, but water in the sample affects the results. In the case of aqueous samples, it is possible to dry the sample before analysis. The displayed price includes the full CHNOS package with two parallel measurements and applies to conventional organic samples. The results are reported as wt-% of the initial sample. The addition of ash, drying, and dry loss measurements will increase the minimum required sample material to 300 mg. The analysis gives the total carbon, hydrogen, nitrogen, sulfur, and oxygen content of the material, but it does not identify any chemical structures. The measurement can be combined with other methods, such as GC-MS, 1H, and 13C NMR, to perform substance structure identification. Analysis can be split into the following packages: CHN, O, and S.

Commission Regulation (EU) No 2023/915 specifies maximum levels for heavy metals in various foods, and Directive 2002/32/EC does the same for various feeds. This analysis can be used to quantify traces of the heavy metals lead (Pb), cadmium (Cd), arsenic (As), and mercury (Hg) in food, feed, and dietary supplements. The method applied is ICP-MS according to the EN 15763 standard.

Pyrolysis gas chromatography-mass spectrometry (py-GC-MS) analysis to determine the identity of an unknown polymer sample. During the measurement, the sample is instantaneously heated in an inert atmosphere or vacuum. This causes the sample to decompose into smaller molecular fragments, which are then analyzed with GC-MS. Different types of polymers can be identified by their unique decomposition products. This includes, but is not limited to: PE, PP, PS, ABS, PMMA, PET, PC, PVC, polyamides, natural & synthetic rubbers, and more. The price includes the basic preparation and qualitative analysis of the sample. More extensive sample preparation and quantitative analyses are subject to additional costs.

We offer several accredited methods for determining the total fluorine (TF) content of combustible materials: EN 14582, based on combustion ion chromatography (CIC). The method is recommended by the Nordic Council of Ministers as a quick and powerful total fluorine screening technique., EN 15408 using oxygen bomb combustion treatment followed by ion chromatography (IC). This method can be applied to plastic sheets and granules, and it is also possible to determine the total content of S, Cl, and Br., ASTM D7359-23, based on oxidative pyrohydrolytic combustion, followed by CIC.. The most suitable method is typically selected based on the sample matrix. However, please let us know if you wish a specific standard to be followed. Sample preparation (air drying and milling of the sample to particles <1 mm) is included in the displayed price. This analysis is commonly used to evaluate packaging materials' compliance with the PFAS restriction outlined in the new EU Packaging and Packaging Waste Regulation (PPWR). If TF content does not exceed 50 mg/kg (ppm), the material can be considered compliant without further testing.

The following analyses are included in this nanoparticle analysis package, intended to characterize nanoforms according to the REACH Regulation. Particle size distribution and aspect ratios by SEM-EDX Preparation with isopropanol, Sample dispersion on a slide, with centrifugation, SEM analysis and particle count by image analysis, Nanoparticle detection and classification according to the 2022 EC recommendation on the definition of nanomaterial, Reporting of PSD parameters for ~300 particles, including the following: PSD diagram, accumulated and individual., Feret min (min, d10, d25, d50, d75, d90, d95, max), Feret max (min, d10, d25, d50, d75, d90, d95, max), Equivalent circular diameter (min, d10, d25, d50, d75, d90, d95, max), Aspect ratio (calculated based on individual Feret min and Feret max measurements), Number based nano-fraction (%).. Crystal phase analysis by XRD/Rietveld method Sample preparation: drying, grinding, X-ray preparation, XRD analysis over an angular range extending from 10° to 90°, Identification of the crystalline phases present in the sample, Semi-quantitative analysis of phase distribution, using the Rietveld method, Interpretation of diffractograms. Chemical composition/purity by ICP-AES and CHNS analysis ICP-AES quantification of inorganic and metallic elements: Ag, Al, As, B, Ba, Be, Bi, Ca, Cd, Co, Cr, Cu, Fe, K, Li, Mg, Mn, Mo, Na, Ni, P, Pb, S, Se, Sb, Si, Sn, Sr, V, Zn, Ti, and Tl, Determination of C, H, N, and S with an elemental analyzer. Volume-specific surface area (VSSA) and VSSA diameter calculations (optional) BET specific surface area measurement of powder by nitrogen adsorption, True (skeletal) density measurement by He pycnometry, excluding intergranular and intragranular porosity, Both analyses include sample preparation. You can request a quote for the analysis using the form below. Please note that the OECD 125 guideline does not apply to this analysis.