Pharmaceuticals and hormones in concentrate from reject water and wastewater

The analysis determines the concentration of substances listed in Annex I to Directive (EU) 2024/3019 on urban wastewater treatment. Substances that can be very easily treated: Amisulprid (CAS: 71675-85-9), Carbamazepine (CAS: 298-46-4), Citalopram (CAS: 59729-33-8), Clarithromycin (CAS: 81103-11-9), Diclofenac (CAS: 15307-86-5), Hydrochlorothiazide (CAS: 58-93-5), Metoprolol (CAS: 37350-58-6), Venlafaxine (CAS: 93413-69-5). Substances that can be easily disposed of: Benzotriazole (CAS: 95-14-7), Candesartan (CAS: 139481-59-7), Irbesartan (CAS: 138402-11-6), 4-Methylbenzotriazole (CAS No 29878-31-7), 5-methyl-benzotriazole (CAS No 136-85-6), The sum of 4-Methylbenzotriazole & 5-methyl-benzotriazole can be reported if requested. More compounds can be added to the analysis package upon request. This analysis is intended for untreated wastewater. We also offer an analysis with the same target analytes for treated wastewater to determine how effectively the substances are removed during the treatment process. Read more about the testing requirements imposed by the new Urban Wastewater Treatment Directive here.

Analysis to determine the concentrations of organic substances (pharmaceuticals and drug precursors) listed in the revised Urban Wastewater Treatment Directive (EU) 2024/3019. The analysis includes eight substances that can be very easily treated: Amisulprid (CAS: 71675-85-9), Carbamazepine (CAS: 298-46-4), Citalopram (CAS: 59729-33-8), Clarithromycin (CAS: 81103-11-9), Diclofenac (CAS: 15307-86-5), Hydrochlorothiazide (CAS: 58-93-5), Metoprolol (CAS: 37350-58-6), Venlafaxine (CAS: 93413-69-5). And four substances that can be easily disposed of: Benzotriazole (CAS: 95-14-7), Candesartan (CAS: 139481-59-7), Irbesartan (CAS: 138402-11-6), Mixture of 4-Methylbenzotriazole (CAS No 29878-31-7) and 5-methyl-benzotriazole (CAS No 136-85-6). An example test report (with mock data) illustrating the reporting format is available: Example report – Pharmaceuticals in treated wastewater. This method is suitable for treated wastewater samples with low total solids and dissolved solids content, but we also offer analyses for untreated wastewater. Please check the suitability of the sample matrix with the testing expert when requesting an offer.

Determination of the following elements in wastewater and water solutions with high solid matter content with ICP-OES/MS (AFS is used for Hg measurement): Element LOQ (µg/L) Ag 1 Al 5 As 1 B 10 Ba 1 Be 0.2 Ca 50 Cd 0.2 Co 0.5 Cr 5 Cu 1 Fe 5 Hg 0.05 K 15 Li 1 Mg 10 Mn 0.5 Mo 1 Na 30 Ni 3 P 20 Pb 1 Sb 1 Se 5 Sn 1 Ti 5 Tl 0.5 U 0.1 V 5 Zn 2 The sample is digested with HNO3 in an autoclave before analysis. Detection limits may vary depending on sample properties. This method is suitable for wastewater samples that are relatively neutral (pH ~ 5-9). If the sample material is more acidic or alkaline, please select "Elemental analysis of liquid chemicals and process liquids by ICP-SFMS" instead of this method. An express turnaround option (~1 week) is available for a 50% surcharge. Ask our experts for more information through the form below.

This metal screening analysis includes the semi-quantitative determination of 70 elements. The method can be used, for example, to determine the background concentrations of metals in environmental samples or to study the elemental distribution of unknown samples. Screening is also often performed to assess which metals should be analyzed by a quantitative method. The measurement is performed using a high-resolution ICP-MS technique (ICP-SFMS), which can identify very low elemental concentrations. A semi-quantitative determination of the following elements is included: Ag, Al, As, Au, B, Ba, Be, Bi, Br, Ca, Cd, Ce, Co, Cr, Cs, Cu, Dy, Er, Eu, Fe, Ga, Gd, Ge, Hf, Hg, Ho, I, Ir, K, La, Lu, Mg, Mn, Mo, Na, Nb, Nd, Ni, Os, P, Pb, Pd, Pr, Pt, Rb, Re, Rh, Ru, S, Sb, Sc, Se, Si, Sm, Sn, Sr, Ta, Tb, Te, Th, Ti, Tl, Tm, U, V, W, Y, Yb, Zn and Zr. However, please note that some elements may not be determinable due to matrix interference. During this semi-quantitative analysis, the instrument is calibrated for about 30 elements. The rest of the analytes are quantified using sensitivity factors for calibrated elements with similar mass and first ionization potential, considering isotope abundances. Quantitative analysis is also available at an additional price. During this analysis, all elements are calibrated (excluding halogens and Os). Please ask for an offer for this service.

Simultaneous determination of the following elements in water samples with the ICP-MS technique (AFS is used for Hg): Element LOQ (µg/L) Ag 1 Al 5 As 1 B 10 Ba 0.5 Be 0.2 Ca 50 Cd 0.02 Co 0.5 Cr 0.2 Cu 1 Fe 2 Hg 0.005 K 50 Li 1 Mg 3 Mn 0.5 Mo 1 Na 30 Ni 2 P 50 Pb 0.5 Sb 0.05 Se 1 Sn 1 Ti 1 Tl 0.5 U 0.1 V 1 Zn 2 The sample is homogenized and acidified (HNO3), after which the analysis is performed from the liquid phase. The displayed price applies to natural waters (for example, river or lake water). If the sample contains a lot of solids or the matrix is otherwise significantly different from natural water (for example, wastewater and industrial water), different analysis methods need to be used, which will affect the price and the quantification limits. The concentration of each element is reported in µg/l.

Analysis of gaseous samples using Raman spectroscopy.

Pyrolysis gas chromatography-mass spectrometry (py-GC-MS) analysis to determine the identity of an unknown polymer sample. During the measurement, the sample is instantaneously heated in an inert atmosphere or vacuum. This causes the sample to decompose into smaller molecular fragments, which are then analyzed with GC-MS. Different types of polymers can be identified by their unique decomposition products. This includes, but is not limited to: PE, PP, PS, ABS, PMMA, PET, PC, PVC, polyamides, natural & synthetic rubbers, and more. The price includes the basic preparation and qualitative analysis of the sample. More extensive sample preparation and quantitative analyses are subject to additional costs.

This analysis provides quantitative information about the crystalline and amorphous phases within your sample using high-resolution synchrotron X-ray diffraction (XRD). A standard analysis includes: Quantification of crystalline phases as weight percentages, Quantification of the total amorphous content, High-resolution powder diffraction data and the resulting diffractogram, A comprehensive test report detailing the findings. For more advanced needs, we also offer total scattering/pair distribution function (PDF) analysis to reveal the local atomic structure in amorphous or nano-structured materials. Do not hesitate to ask for a quote.

GC-MS analysis of 16 PAH compounds, which are listed as high-priority pollutants by the U.S. Environmental Protection Agency (EPA). The analyzed PAH compounds are: naphthalene [CAS: 91-20-3], acenaphthylene [CAS: 208-96-8], acenaphthene [CAS: 83-32-9], fluorene [CAS: 86-73-7], phenanthrene [CAS: 85-01-8], anthracene [CAS: 120-12-7], fluoranthene [CAS: 206-44-0], pyrene [CAS: 129-00-0], benz(a)anthracene [CAS: 56-55-3], chrysene [CAS: 218-01-9], benzo(b)fluoranthene [CAS: 205-99-2], benzo(k)fluoranthene [CAS: 207-08-9], benzo (a) pyrene [CAS: 50-32-8], dibenzo(ah)anthracene [CAS: 53-70-3], benzo (ghi) perylene [CAS: 191-24-2], indeno (123cd) pyrene [CAS: 193-39-5].

This analysis package covers the persistent organic pollutants (POPs) most relevant to plastic waste, including plastics from waste electrical and electronic equipment (WEEE). The package is designed to support risk assessments under the POPs Regulation (EU) 2019/1021. The analysis is divided into the following subsets: Polybrominated diphenyl ethers (PBDEs), Hexabromocyclododecane (HBCDD), Short- and medium-chain chlorinated paraffins (SCCPs and MCCPs), Polychlorinated biphenyls (PCBs), dioxins and furans, Dechlorane Plus, UV-328. Individual subsets can be ordered on their own or in any combination at a reduced price. A package covering all POPs listed in Regulation (EU) 2019/1021 is also available. Solid samples must be ground before analysis. Milling can be provided at an additional cost, but it will extend the turnaround time.