Explosion parameters of combustible dust

Initial explosibility screening, also known as a "go/no go test", to determine whether a fine powder is capable of generating an explosive dust atmosphere. The following determinations are included: Sample preparation and treatment, Grain size analysis with the sieve method, Basic chemical analysis (moisture, volatile matter, ash, fixed carbon), Explosion screening tests according to ISO/IEC 80079-20-2, comprising Hartman tube ignition tests and, if required, a 20-liter sphere ignition test.. As a result, you will get an ISO 17025-accredited test report stating whether or not the sample is classified as combustible dust. We also offer additional tests to determine combustible dust's explosion and ignition parameters. Please ask our experts for more information.

Smoke and toxicity testing by IMO 2010 FTP Code Part 2 is performed on surface materials to assess their suitability for marine use. The specimen is placed in a horizontal position under a cone radiator inside a smoke-density chamber. During the test, the specimen starts to emit smoke, which is collected in the closed chamber. The density of smoke is detected optically. When making toxicity measurements with FTIR, the concentrations of carbon monoxide (CO), hydrogen chloride (HCl), hydrogen bromide (HBr), hydrogen fluoride (HF), hydrogen cyanide (HCN), nitrogen oxides NO_x (NO + NO₂), and sulfur dioxide (SO₂) are measured. Classification criteria for smoke An average (D_m) of the maximum of D_s of three tests at each test condition should be within the following limits: D_m 200 for materials used as the surface of bulkheads, linings, or ceilings, D_m 400 for materials used as a primary deck covering, D_m 500 for materials used as a floor covering , D_m 400 for plastic pipes and electric cables. Classification criteria for toxicity The gas concentrations measured at each test condition should be within the following limits: CO 1450 ppm, HCl 600 ppm, HBr 600 ppm, HF 600 ppm, HCN 140 ppm , NO_x 350 ppm , SO₂ 120 ppm (200 ppm for flooring).

Diesel exhaust fluid (DEF) is an additive used in diesel-powered vehicles to help the catalytic reduction of nitrous oxides. Thus, the use of AdBlue and other exhaustive fluids improves ambient air quality. DEF testing package according to ISO 22241:2019 includes the measurements listed below: Urea content (ISO 22241-2C), Density at 20 °C (EN ISO 12185) , Refractive index at 20 °C (ISO 22241-2C), Alkalinity as NH₃ (ISO 22241-2D), Biuret (ISO 22241-2E), Aldehydes (ISO 22241-2F), Insoluble matter (ISO 22241-2G), Phosphate (ISO 22241-2H), Determination of Al, Ca, Cr, Cu, Fe, K, Mg, Na, Ni, and Zn content (ISO 22241-2I).

This test is used to evaluate the color fastness of dyed or printed paper or board that is intended to come into contact with food. The applied simulants are Olive oil, 3% acetic acid, Alkaline salt solution (saliva simulant), Distilled water. Color transfer is assessed against a greyscale according to standard EN 646.

X-Ray Reflectometry (XRR) analysis is used to measure the density (g/cm3), thickness (nm), and roughness (nm) of thin films. The method is applicable to the characterization of single- or multilayered thin films, as it provides information on the thickness and density of individual layers of the sample material as well as the roughness of the interphases. Greatest accuracy for XRR thickness measurements is generally achieved for samples containing 1-200 nm thick surface layers with under 5 nm RMS roughness. Thicker films and coatings with rougher surfaces can also be characterized, but the accuracy of thickness determination decreases as the thickness and roughness of the film or film stack increase. >150 mm wafers are typically cut to fit the sample holder. Please let us know if you need testing for larger wafers that cannot be cut into pieces. The available temperature range for XRR measurements is 25-1100 °C, and crystallinity can be studied as a function of temperature. The measurements can be performed under a normal atmosphere, inert gas, or vacuum. Measurements are typically performed using one of the following instruments: Rigaku SmartLab, Panalytical X'Pert Pro MRD, Bruker D8 Discover. Please let us know if you have a preference for a specific instrument.

The burning rate of horizontally mounted materials designed to be used in vehicles and buses must be tested with the UN/ECE R118 annex 6 test before they can be approved for use. Measurlabs offers this and the other R118 tests with accreditation. In the test method, the exposed side of the test specimen is burned from underneath and the burning rate is measured and expressed in mm/min.

A dilatometer is used to determine the linear thermal expansion of a material as a function of temperature. The temperature range of the measurement is generally between 25 °C and 1,600 °C. There is also an option to perform the test in a cryogenic atmosphere, which ranges from -175 °C to 300 °C. The typical heating rate is 3 °C/min. As a result of the measurement, you will get the coefficient of thermal expansion (CTE) and the absolute change in sample length, both as a function of temperature. The testing can be performed in various atmospheres, including air, argon, CO₂, N₂, and O₂. Please contact us to get a quote. The price will depend on the testing conditions, so please specify them as precisely as possible.

The melting behavior of fusible materials used in certain motor vehicles must be determined according to Annex 7 of UN/ECE Regulation 118. In the test, it is monitored whether the specimen ignites, creates flaming droplets, and if these droplets ignite cotton wool placed under the specimen. For the material to pass the test, there must be no formation of flaming drops that ignite the cotton wool. Measurlabs can offer accredited test reports for the UN/ECE R118 Annex 7 test, as well as the Annex 6 and Annex 8 tests. Non-isotropic materials must be tested from both sides, which means that double the number of samples is required.

The peroxide value (PV) measures hydroperoxides formed as a result of the autoxidation of unsaturated fatty acids in food and feed products. Accumulation of autoxidation products affects sensory quality and is potentially harmful to human and animal health, making PV an important quality indicator in the food industry. Autoxidation reactions occur at different rates during the manufacturing, storage, and use of food and feed, but are generally sped up with elevated temperatures and exposure to light. This method includes an extraction step, after which the determination of peroxide value is performed on the extracted fat or oil. The method is suitable for all food and feed products that contain fat.

IMO 2010 FTP Code Part 8 testing for upholstered furniture is used to assess the suitability of materials for maritime use. The results can be used for type approval (wheel mark). The testing is performed on the actual product or a small-scale test chair consisting of the cover and filling components of the product. Materials needed for the test are as follows x 3: Cover: 800 mm x 650 mm, Back-filling: 450 mm x 300 mm x 75 mm , Seat-filling: 450 mm x 150 mm x 75 mm. During the cigarette test, a cigarette is lighted and positioned axially along the junction between the seat and the back. The test assembly is not allowed to smolder after one hour from the beginning of the test. In the burner tube test, a burner tube with a propane flame is allowed to burn for 20 seconds, positioned axially along the junction between the seat and the back. No flaming or progressive smoldering is allowed to continue for more than 120 seconds after the removal of the burner tube.