Horizontal Flame Propagation UN/ECE Regulation No. 118 annex 6
The burning rate of horizontally mounted materials designed to be used in vehicles and buses must be tested with the UN/ECE R118 annex 6 test before they can be approved for use. Measurlabs offers this and the other tests as per R118 with accreditation.
In the test method, the exposed side of the test specimen is burned from underneath and the burning rate is measured and expressed in mm/min.
- Suitable sample matrices
- Materials and products used in vehicles and buses
- Minimum sample amount
- Six samples with dimensions of 356x100 mm and thickness up to 13 mm. For non-isotropic materials 6 samples in each direction must be prepared.
- Typical turnaround time
- 3 weeks after receiving the samples
- Quality system
- Accredited test method
- Method expert
- Ville Roininen
Results in four easy steps
1Select the tests you need
2Get an order confirmation
3Ship your samples to us
4Receive your test report