Microplastics with py-GC/MS in sediment, soil, or sludge

Analysis to screen a material for the presence of brominated flame retardants (BFRs), including polybrominated biphenyls (PBBs) and polybrominated diphenyl ethers (PBDEs). The test is performed with a pyrolysis gas chromatography-mass spectrometer (py-GC-MS) according to the ISO 7270-1 standard. The sample is pyrolyzed, which is followed by separation and identification with GC-MS. The obtained pyrogram is then compared to a blank sample that does not contain any fire retardants. We also offer the analysis for electrotechnical products as per IEC 62321-6. Please ask our experts for more information about this option.

We have various testing services available for ultrapure water. Pricing depends on the selected parameters and the number of samples. Please contact Measurlabs to get an offer. Note that we will provide suitable shipping containers based on the analyses that are ordered. Trace elements by ICP-MS For the determination of elemental impurities, we offer a basic 36-element and an extended 67-element package. The basic package includes the following 36 elements: Li, Be, B, Na, Mg, Al, K, Ca, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Ga, Ge, As, Sr, Zr, Nb, Mo, Ag, Cd, Sn, Sb, Ba, Ta, W, Pt, Au, Tl, Pb, and Bi. The extended analysis includes the following elements in addition to the basic package: Ce, Cs, Dy, Er, Eu, Gd, Hf, Ho, In, Ir, La, Lu, Hg, Nd, Os, Pd, Pr, Re, Rh, Rb, Ru, Sm, Sc, Se, Te, Tb, Th, Tm, U, Yb, and Y. Reporting limits depend on the element and specific sample matrix, but typically vary between 0.001 ppb and 0.6 ppb. For this analysis, samples must be delivered in Teflon containers. Hardness Hardness value can be calculated based on the ICP-MS results. Silicon and silica (Si, SiO2) Our service catalog includes the determination of total, dissolved, and colloidal silica (SiO2). Total silicon is analyzed using the ICP-OES technique, and dissolved silicon by UV-VIS (molybdenum heteropoly blue method). Colloidal silica is calculated as the difference between total silica and dissolved silica. Total organic and inorganic carbon (TOC and TIC) We offer TOC determination for ultrapure water samples with a 5 ppb quantification limit. For this analysis, samples must be delivered in certified 40 ml TOC vials. Total inorganic carbon (TIC) analysis can also be performed using a TOC analyzer. Anions by ion chromatography (IC) For anions, we have a basic package and a separate package for organic anions. The basic package includes the following anions: bromide(Br⁻), chloride (Cl⁻), fluoride (F⁻), nitrate (NO₃⁻), nitrite (NO₂⁻), phosphate (PO₄³⁻), and sulfate (SO₄²⁻). Analysis of organic anions includes: acetate, formate, glycolate, propionate, and butyrate. Reporting limits depend on the anion and sample matrix, but typically vary between 0.02 and 1 ppb for basic anions and are around 25 ppb for organic anions. For this analysis, samples must be delivered in HDPE bottles. Cations by ion chromatography (IC) The analysis package for cations includes the determination of the following cations: ammonium (NH4+), calcium (Ca2+), lithium (Li+), magnesium (Mg2+), potassium (K+), and sodium (Na+). Reporting limits typically vary between 2 ppb and 5 ppb. Samples must be delivered in HDPE bottles. PFAS compounds (24 compounds) Analysis includes PFOS, PFOA, PFNA, PFHxS, and 20 other selected PFAS compounds. The complete list of compounds can be provided upon request. The reporting limit is typically 1 ng/L. The sample must be delivered in a plastic PFAS-free bottle, preferably made from HDPE.

This metal screening analysis includes the semi-quantitative determination of 70 elements. The method can be used, for example, to determine the background concentrations of metals in environmental samples or to study the elemental distribution of unknown samples. Screening is also often performed to assess which metals should be analyzed by a quantitative method. The measurement is performed using a high-resolution ICP-MS technique (ICP-SFMS), which can identify very low elemental concentrations. A semi-quantitative determination of the following elements is included: Ag, Al, As, Au, B, Ba, Be, Bi, Br, Ca, Cd, Ce, Co, Cr, Cs, Cu, Dy, Er, Eu, Fe, Ga, Gd, Ge, Hf, Hg, Ho, I, Ir, K, La, Lu, Mg, Mn, Mo, Na, Nb, Nd, Ni, Os, P, Pb, Pd, Pr, Pt, Rb, Re, Rh, Ru, S, Sb, Sc, Se, Si, Sm, Sn, Sr, Ta, Tb, Te, Th, Ti, Tl, Tm, U, V, W, Y, Yb, Zn and Zr. However, please note that some elements may not be determinable due to matrix interference. During this semi-quantitative analysis, the instrument is calibrated for about 30 elements and the rest of the analytes are quantified using sensitivity factors for calibrated elements with similar mass and first ionization potential considering isotope abundances. Quantitative analysis is also available at an additional price. During this analysis, all elements are calibrated (excluding halogens and Os). Please ask for an offer for this service.

Our targeted PFAS analysis options for wastewater, process water, and other highly contaminated water samples include the following:  In-house method based on EPA 1633 with 49 target compounds and a reporting limit of 1-2 ng/l. The analysis is suitable for both treated and untreated wastewater and is often used when evaluating the PFAS-removal efficiency of the treatment process. , Official EPA 1633 method that targets the 40 compounds specified in the standard. The price for this measurement is slightly higher than that for the in-house method., In-house method based on EPA 533 or ISO 21675 with 57 target compounds and a reporting limit of 0.2 ng/l for most compounds. . Please note that the reporting limits can be higher for extremely contaminated samples. Full target compound lists for each method are available upon request. When requesting an offer, please describe the expected contamination level of your samples and any specific requirements regarding testing standards or target compounds. This helps us confirm method suitability and prepare an accurate quote.

Determination of Be, Ba, Co, Al, Mg, Cu, Li, Mn, Ag, Sn, Ti, V, Zn, Tl, B, Hg, Mo, Fe, Ca, K, U, P, Cd, Na, Cr, Ni, Pb, Sb, As, and Se in water samples with ICP-MS-technique. The sample is homogenized and acidified (HNO3), after which the analysis is performed from the liquid phase. The displayed price applies to natural waters. (for example, river or lake water) If the sample contains a lot of solids or the matrix is significantly different from natural water (for example, wastewater and industrial waters), different analysis methods need to be used. The concentration of each element is reported in µg/l.

Our δ2H (δD) stable isotope analysis determines the ratio of 2H to 1H (deuterium to protium) in a given sample material by a continuous flow isotope ratio mass spectrometer (IRMS). The results are reported per mille (‰), measuring the deviation of the ratio of the isotopes in comparison to a standard reference material. More than 30 IAEA, USGS, and in-house isotopic standards are available to accommodate a wide range of expected ratios. The price and turnaround time displayed apply to conventional sample matrices. The analysis is suitable for a wide range of sample materials, including, but not limited to: water, sediment, soil, plant tissue, animal tissue, bone, and other organic materials. All of our stable isotope analyses are conducted by ISO 17025-accredited facilities. Please contact us using the form below to arrange testing on your samples.

ICP-OES measurement package for soil, sludge, or sediment samples. Pre-treatment of the sample with aqua regia decomposition is included in the price. The following elements are quantified using the ICP-OES technique: Ag, As, Ba, Be, Cd, Co, Cr, Cu, Fe, Hg, Li, Mn, Mo, Ni, Pb, Sb, Sn, Sr, Tl, V, and Zn. The concentrations are expressed in mg/kg d.m. Also, nutrient measurement package for soil, sludge, or sediment samples using the ICP-OES method. This package includes the analysis includes the pre-treatment of the sample with aqua regia decomposition and the measurement of the following elements using the ICP-OES technique: Al, B, Bi, Ca, K, Mg, Na, S, Se, Si, Te, Ti, and Zr. The analysis is also available with an express turnaround time. Ask our experts for more information. More specific packages, such as heavy metals or nutrients, can also be provided for soil, sediment, or sludge samples.

Determination of carbon, hydrogen, nitrogen, sulfur, and oxygen content of an organic sample. CHNS analysis (”LECO analysis”) is performed using a flash combustion method, where the sample is combusted under 25 kPa of O2 at an elevated temperature (1000 °C), followed by gas chromatography separation and detection using a thermal conductivity detector. Oxygen is analyzed by reduction on granulated carbon at 1480 °C, utilizing high-temperature thermal decomposition and conversion of oxygen into carbon monoxide before gas chromatography separation and detection with a thermal conductivity detector. The sample can be either solid or liquid, but water in the sample affects the results. In the case of aqueous samples, it is possible to dry the sample before analysis. The displayed price by includes the full CHNOS package with two parallel measurements and applies to conventional organic samples. The results are reported as wt-% of the initial sample. The ash, drying and dry loss measurements will increase the minimum required sample material need to 300 mg. The analysis gives the total carbon, hydrogen, nitrogen, sulfur, and oxygen content of the material, but it does not identify any chemical structures. The measurement can be combined with other methods, such as GC-MS, 1H, and 13C NMR, to perform substance structure identification. Analysis can be split into the following packages: CHN, O, and S.

Analysis of gaseous samples using Raman spectroscopy.

Pyrolysis gas chromatography-mass spectrometry (py-GC-MS) analysis to determine the identity of an unknown polymer sample. During the measurement, the sample is instantaneously heated in an inert atmosphere or vacuum. This causes the sample to decompose into smaller molecular fragments which are then analyzed with GC-MS. Different types of polymers can be identified by their unique decomposition products. This includes, but is not limited to: PE, PP, PS, ABS, PMMA, PET, PC, PVC, polyamides, natural & synthetic rubbers, and more. The price includes the basic preparation and qualitative analysis of the sample. More extensive sample preparation pr quantitative analyses are subject to additional costs.