Elemental analysis of plastics and polymers by ICP-SFMS (selected elements)

Determination of the total organic fluorine (TOF) content in combustible materials by combustion ion chromatography (CIC). TOF analysis gives information about the total amount of organic fluorinated compounds. It can also be used to evaluate the presence of per- and polyfluoroalkyl substances (PFAS) in the material, even though individual PFAS compounds can't be analyzed with this method. The analysis is suitable for many different materials. Please describe the sample in detail when requesting an offer to help us prepare a quote quickly.

Analysis for quantifying dioxins and furans (PCDD/F) in various packaging materials (e.g. food and cosmetics packaging) and their raw materials, including plastics, paper, and rubber. Dioxins and furans are a family of chlorine-containing chemicals considered bioaccumulating, persistent organic pollutants (POPs) that can be toxic even at low doses. While regulatory limits apply mainly to food and feed, packaging materials can be a source of indirect exposure to dioxins and furans. Recycled materials tend to pose relatively high risks, depending on the quality of the raw material and the effectiveness of the decontamination process. The following substances are included in the analysis: Dibenzo-p-dioxins (PCDDs) Polychlorinated dibenzofurans (PCDFs) 2,3,7,8-TCDD. 2,3,7,8-TCDF. 1,2,3,7,8-PeCDD. 1,2,3,7,8-PeCDF. 1,2,3,4,7,8-HxCDD. 2,3,4,7,8-PeCDF. 1,2,3,6,7,8-HxCDD. 1,2,3,4,7,8-HxCDF. 1,2,3,7,8,9-HxCDD. 1,2,3,6,7,8-HxCDF. 1,2,3,4,6,7,8-HpCDD. 1,2,3,7,8,9-HxCDF. OCDD. 2,3,4,6,7,8-HxCDF. 1,2,3,4,6,7,8-HpCDF. 1,2,3,4,7,8,9-HpCDF. OCDF. Testing is often performed for the following reasons: Analyzing recycled PE, PP, and LDPE intended for cosmetics packaging according to CosPaTox guidelines., Analyzing paper and board bleached with elementary chlorine according to the requirements of TemaNord 2008:515 guidelines..

Cyclosiloxanes are the primary building blocks of siloxane polymers and, ultimately, silicone rubber. Hence, cyclosiloxanes can remain in the final silicone article as residual impurities. Several cyclosiloxanes (D4, D5, D6; see table below) are considered harmful to the environment and human health. These three substances are listed in the REACH Candidate List of substances of very high concern (SVHC). Substance Abbreviation CAS N:o Octamethylcyclotetrasiloxane D4 556-67-2 Decamethylcyclopentasiloxane D5 541-02-6 Dodecamethylcyclohexasiloxane D6 540-97-6 The Nordic Swan Ecolabel criteria for greaseproof paper sets the limit values for D4, D5, and D6 impurities in silicone coating as 400 ppm per substance and 1000 ppm for the sum of D4, D5, and D6. In addition to the restricted substances listed above, this analysis package includes the quantification of cyclosiloxanes D3, D7, and D8.

Analysis of PAH compounds in plastic, rubber, paper, board, and products made from these raw materials (e.g., textiles, toys, packaging materials) as required by the REACH Regulation. Test package includes the following substances: Benzo(a)pyrene [benzo(def)chrysene] [CAS: 50-32-8] , Benzo(e)pyrene [CAS: 192-97-2] , Benzo(a)anthracene [CAS: 56-55-3] , Chrysene [CAS: 218-01-9] , Benzo(b)fluoranthene [CAS: 205-99-2] , Benzo(j)fluoranthene [CAS: 205-82-3] , Benzo(k)fluoranthene [CAS: 207-08-9], Dibenzo(a,h)anthracene [CAS: 53-70-3].

Determination of total organic fluorine (TOF) in paper, polymers, and textiles TOF analysis gives information about the total amount of organic fluorinated compounds. It can also be used to evaluate the overall presence or absence of PFAS compounds even though this method cannot identify individual PFAS. Do not hesitate to contact us for more information and a quote for your sample batch.

Phthalates are a group of chemicals widely used as plasticizers, which make plastics more flexible and durable. They have also been used as additives in products such as cosmetics and personal care items. Several phthalates have been identified as endocrine-disrupting agents or as chemicals toxic to reproduction. Exposure to phthalates can occur through: Oral exposure Food: Exposure occurs via migration from food packaging., Children's toys: Children often put toys in their mouths.., Inhalation: Breathing in dust from vinyl flooring or fragrances (like perfumes) can cause exposure to phthalates via inhalation., Skin contact: Phthalates present in cosmetics, lotions, and soaps can be absorbed through the skin.. For other listed matrices apart from cosmetics, the analysis package covers the following substances included in the REACH Authorization List: Substance Abbreviation CAS number Diisobutyl phthalate DIBP 84-69-5 Dibutyl phthalate DBP 84-74-2 Benzyl butyl phthalate BBP 85-68-7 Bis(2-ethylhexyl) phthalate DEHP 117-81-7 Di(n-octyl) phthalate DNOP 117-84-0 Diisononyl phthalate DINP 68515-48-0 Diisodecyl phthalate DIDP 26761-40-0 Products that contain restricted phthalates in concentrations higher than 0.1% may be removed from the market. The analysis package for cosmetic products contains the following phthalates: Substance Abbreviation CAS number Bis(2-ethylhexyl) phthalate DEHP 117-81-7 Benzyl butyl phthalate BBP 85-68-7 Dibutyl phthalate DBP 84-74-2 Diisononyl phthalate DINP 68515-48-0 Di(n-octyl) phthalate DNOP 117-84-0 Diisodecyl phthalate DIDP 26761-40-0 All the above-mentioned substances are prohibited in cosmetic products (Annex II of Regulation (EC) No 1223/2009).

This metal screening analysis includes the semi-quantitative determination of 70 elements. The method can be used, for example, to determine the background concentrations of metals in environmental samples or to study the elemental distribution of unknown samples. Screening is also often performed to assess which metals should be analyzed by a quantitative method. The measurement is performed using a high-resolution ICP-MS technique (ICP-SFMS), which can identify very low elemental concentrations. A semi-quantitative determination of the following elements is included: Ag, Al, As, Au, B, Ba, Be, Bi, Br, Ca, Cd, Ce, Co, Cr, Cs, Cu, Dy, Er, Eu, Fe, Ga, Gd, Ge, Hf, Hg, Ho, I, Ir, K, La, Lu, Mg, Mn, Mo, Na, Nb, Nd, Ni, Os, P, Pb, Pd, Pr, Pt, Rb, Re, Rh, Ru, S, Sb, Sc, Se, Si, Sm, Sn, Sr, Ta, Tb, Te, Th, Ti, Tl, Tm, U, V, W, Y, Yb, Zn and Zr. However, please note that some elements may not be determinable due to matrix interference. During this semi-quantitative analysis, the instrument is calibrated for about 30 elements and the rest of the analytes are quantified using sensitivity factors for calibrated elements with similar mass and first ionization potential considering isotope abundances. Quantitative analysis is also available at an additional price. During this analysis, all elements are calibrated (excluding halogens and Os). Please ask for an offer for this service.

Determination of carbon, hydrogen, nitrogen, sulfur, and oxygen content of an organic sample. CHNS analysis (”LECO analysis”) is performed using a flash combustion method, where the sample is combusted under 25 kPa of O2 at an elevated temperature (1000 °C), followed by gas chromatography separation and detection using a thermal conductivity detector. Oxygen is analyzed by reduction on granulated carbon at 1480 °C, utilizing high-temperature thermal decomposition and conversion of oxygen into carbon monoxide before gas chromatography separation and detection with a thermal conductivity detector. The sample can be either solid or liquid, but water in the sample affects the results. In the case of aqueous samples, it is possible to dry the sample before analysis. The price includes two parallel measurements. The results are reported as wt-% of the initial sample. The ash, drying and dry loss measurements will increase the minimum required sample material need to 300 mg. The analysis gives the total carbon, hydrogen, nitrogen, sulfur, and oxygen content of the material, but it does not identify any chemical structures. The measurement can be combined with other methods, such as GC-MS, 1H, and 13C NMR, to perform substance structure identification. Possible element packages: O, CHNS, and CHNOS.

Determination of mineral oil saturated hydrocarbons (MOSH) with polyolefin oligomeric saturated hydrocarbons (POSH) and mineral oil aromatic hydrocarbons (MOAH) in various matrices, including: Food contact materials (e.g., paper, board, plastics, rubber), Printing inks (incl. carbon black), Cosmetic products and raw materials, Lubricating oils and greases, white oils. The results are reported as the concentrations of fractions of MOSH/POSH and MOAH, with grouping based on the number of carbon atoms in the substances. The reported fractions are listed in the table below: MOSH/POSH (C10-C50), total MOAH (C10-C50), total MOSH/POSH (≥C10-≤C16) MOAH (≥C10-≤C16) MOSH/POSH (>C16-≤C20) MOAH (>C16-≤C25) MOSH/POSH (>C20-≤C25) MOAH (>C25-≤C35) MOSH/POSH (>C25-≤C35) MOAH (>C35-≤C50) MOSH/POSH (>C35-≤C40) MOSH/POSH (>C40-≤C50) In case the sample contains high amounts of MOSH, POSH, or poly alpha olefins (PAO), the levels should be indicated before shipping samples. Moreover, the LOQ is higher for samples with high MOSH, POSH, or PAO content due to dilution. Additionally, the safety data sheets (SDS) should be supplied with the samples when available.

Determination of the oxygen transmission rate of plastic films and sheet-like materials. The test is performed on two parallel samples simultaneously. Measurement conditions (temperature and relative humidity) can be chosen according to the intended use of the material. Oxygen permeability is typically measured at 23 °C and 0% relative humidity as per standard ASTM D3985. In moist conditions, for example at 38 °C and 90% relative humidity, standard ASTM F1927 is used. Please disclose the desired temperature (from 10 °C to 38 °C) and relative humidity (either 0% or from 20% to 90%) upon ordering. This measurement is suitable for plastic films with OTR values between 0.05 to 20 000 cm³/(m² * day).