13C stable isotope analysis

This metal screening analysis includes the semi-quantitative determination of 70 elements. The method can be used, for example, to determine the background concentrations of metals in environmental samples or to study the elemental distribution of unknown samples. Screening is also often performed to assess which metals should be analyzed by a quantitative method. The measurement is performed using a high-resolution ICP-MS technique (ICP-SFMS), which can identify very low elemental concentrations. A semi-quantitative determination of the following elements is included: Ag, Al, As, Au, B, Ba, Be, Bi, Br, Ca, Cd, Ce, Co, Cr, Cs, Cu, Dy, Er, Eu, Fe, Ga, Gd, Ge, Hf, Hg, Ho, I, Ir, K, La, Lu, Mg, Mn, Mo, Na, Nb, Nd, Ni, Os, P, Pb, Pd, Pr, Pt, Rb, Re, Rh, Ru, S, Sb, Sc, Se, Si, Sm, Sn, Sr, Ta, Tb, Te, Th, Ti, Tl, Tm, U, V, W, Y, Yb, Zn and Zr. However, please note that some elements may not be determinable due to matrix interference. During this semi-quantitative analysis, the instrument is calibrated for about 30 elements and the rest of the analytes are quantified using sensitivity factors for calibrated elements with similar mass and first ionization potential considering isotope abundances. Quantitative analysis is also available at an additional price. During this analysis, all elements are calibrated (excluding halogens and Os). Please ask for an offer for this service.

Determination of the total organic fluorine (TOF) content in combustible materials by combustion ion chromatography (CIC). TOF analysis gives information about the total amount of organic fluorinated compounds. It can also be used to evaluate the presence of per- and polyfluoroalkyl substances (PFAS) in the material, even though individual PFAS compounds can't be analyzed with this method. The analysis is suitable for many different materials. Please describe the sample in detail when requesting an offer to help us prepare a quote quickly.

Determination of carbon, hydrogen, nitrogen, sulfur, and oxygen content of an organic sample. CHNS analysis (”LECO analysis”) is performed using a flash combustion method, where the sample is combusted under 25 kPa of O2 at an elevated temperature (1000 °C), followed by gas chromatography separation and detection using a thermal conductivity detector. Oxygen is analyzed by reduction on granulated carbon at 1480 °C, utilizing high-temperature thermal decomposition and conversion of oxygen into carbon monoxide before gas chromatography separation and detection with a thermal conductivity detector. The sample can be either solid or liquid, but water in the sample affects the results. In the case of aqueous samples, it is possible to dry the sample before analysis. The price includes two parallel measurements. The results are reported as wt-% of the initial sample. The ash, drying and dry loss measurements will increase the minimum required sample material need to 300 mg. The analysis gives the total carbon, hydrogen, nitrogen, sulfur, and oxygen content of the material, but it does not identify any chemical structures. The measurement can be combined with other methods, such as GC-MS, 1H, and 13C NMR, to perform substance structure identification. Possible element packages: O, CHNS, and CHNOS.

Quantitative mineralogical analysis by X-ray powder diffraction (XRD) on bentonite samples to identify and quantify the concentration of occurring minerals. The analysis is performed according to EN 13925. The results of the analysis are expressed as percentages, for example: % of Smectite, % of Quartz, % of Calcite, % of Opal, % of Feldspar. The uncertainty of the measurement is 10–20%.

Spark-OES is a commonly used method to determine the elemental composition of metals and alloys. The method provides a better alternative to other similar analysis techniques (ICP-OES, ICP-MS, XRF) due to its speed and low detection limits. All metallic elements and some non-metallic elements, such as C, N, and S, can be detected in the ppm range. The method is suitable for solid metal pieces with a minimum size of 1 x 1 cm. Sample preparation is included in the analysis.

ICP-MS elemental analysis for geological samples (rocks, ore, mining samples) with aqua regia digestion. The analysis includes the following elements: Ag, Al, As, Au, B, Ba, Be, Bi, Ca, Cd, Ce, Co, Cr, Cs, Cu, Fe, Ga, Ge, Hf, Hg, In, K, La, Li, Mg, Mn, Mo, Na, Nb, Ni, P, Pb, Pd, Pt, Rb, Re, S, Sb, Sc, Se, Sn, Sr, Ta, Te, Th, Ti, Tl, U, V, W, Y, Zn and Zr. The following rare earth elements (REE) are also included: Dy, Er, Eu, Gd, Ho, Lu, Nd, Pr, Sm, Tb, Tm, and Yb. Gold determinations by this method are semi-quantitative due to the small sample weight used. The price does not include pretreatment, such as crushing or sieving. Shipping included up to 5 kg total weight, extra cost for larger shipments.

Determination of the biomass fraction of CO₂ emissions generated from mixed fuel incineration, as required by the EU Emissions Trading System (ETS). CO₂ originating from non-fossil sources like biomass has an emission factor of zero under EU ETS and is therefore not counted towards carbon emissions. This means that the biomass fraction of mixed fuels, such as municipal waste or solid recovered fuel (SRF), must be determined to calculate reportable emissions accurately. In this analysis, the proportion of biogenic carbon dioxide in total emitted CO₂ from the incineration process is measured using the radiocarbon (¹⁴C) method. The measurement is based on the ASTM D6866 standard. This standard is equally rigorous and based on the same methodology as EN ISO 13833, which is mentioned in Commission Implementing Regulation (EU) 2018/2066 on the monitoring and reporting of greenhouse gas emissions. Testing is relevant for industrial plants that use mixed fuels and participate in emissions trading, as well as for municipal waste incineration (MWI) plants, which have been required to monitor and report emissions according to EU ETS since the beginning of 2024.

Analysis of gaseous samples using Raman spectroscopy.

ICP-MS elemental analysis for geological samples (rocks, ore, mining samples) with Four Acid digestion. The analysis includes the following elements: Ag, Al, As, Ba, Be, Bi, Ca, Cd, Ce, Co, Cr, Cs, Cu, Fe, Ga, Ge, Ge, Hf, In, K, La, Li, Mg, Mn, Mo, Na, Nb, Ni, P, Pb, Rb, Re, S, Sb, Sc, Se, Sn, Sr, Ta, Te, Th, Ti, Tl, U, V, W, Y, Zn and Zr The following rare earth elements (REE) are also included: Dy, Er, Eu, Gd, Ho, Lu, Nd, Pr, Sm, Tb, Tm, and Yb Lead (Pb) isotope analysis is available for an extra cost (20 €) The price does not include pretreatment, such as crushing or sieving. Additional logistics costs are billed if the sample weighs more than 5 kg.

Determination of the hydrogen sulfide (H₂S) content of natural gas or biogas samples. Please contact Measurlabs experts to check the suitability of other sample vessels for the analysis.