Biocompatibility evaluation of breathing gas pathways according to ISO 18562

The purpose of cleaning validation studies is to show that reusable medical devices can be reprocessed effectively between uses so that patients are not exposed to pathogens. Depending on the device’s intended use and classification, appropriate reprocessing steps may include cleaning, disinfection, and/or sterilization. For cleaning validation more specifically, the testing procedure consists of three steps: Simulated contamination with artificial soils that accurately reflect clinically relevant soils, such as blood and other bodily fluids. , Cleaning (manual and/or automated), carefully following the manufacturer's instructions for parameters such as detergents, cleaning tools, water quality, and temperature. , Inspection, both visually and using quantitative methods relevant to the test soil (e.g., proteins, total organic carbon, or hemoglobin), to assess whether residual contaminants remain on the device.. Successful cleaning validation is often sufficient for non-critical reusable devices, such as blood pressure cuffs, monitors, and clutches. Semi-critical and critical devices will require further disinfection and/or sterilization validation studies, which we can also offer. The displayed example price covers a manual cleaning validation study with 6 reprocessing cycles and cleanability evaluations with visual inspection & protein content measurement. Test protocol formulation and reporting are also included.

ISO 10993-23 is an internationally recognized standard for assessing the irritation potential of medical devices when they come into contact with skin, mucosal membranes, or subcutaneous tissues. Irritation tests performed according to the standard are commonly used to demonstrate compliance with EU MDR and FDA requirements. The appropriate testing approach is chosen based on the body contact site: Skin irritation tests evaluate whether a medical device or material causes localized skin irritation when it comes into direct contact with the skin. Testing can be conducted using in vivo or in vitro methods, depending on the device and the market area. , Intracutaneous reactivity tests apply to medical devices or materials that penetrate the skin or come into contact with deeper tissues. The goal is to determine whether extracts from such devices cause localized inflammatory responses in the dermis or subcutaneous layers.. The device itself is tested with a direct contact method, when possible. Alternatively, polar and non-polar solvents are used to prepare extracts that simulate potential leachables from the device. The displayed example price includes an in vivo direct skin irritation test performed under GLP. For a more accurate quote, do not hesitate to contact us with a description of your device and any additional requirements you may have for testing (e.g., market area, quality systems, in vivo vs. in vitro methods).

We offer comprehensive test packages for verifying the quality of type II and type IIR face masks according to the EN 14683 standard. The tests included in the packages are required to label face masks with the CE marking. Medical face masks are divided into Types I and II according to their bacterial filtration efficiency. Type I masks are not intended for healthcare professionals, but for the public to prevent the spread of infectious diseases. Type II masks are further classified based on whether they are splash-resistant (Type IIR) or not (Type II). To comply with the European Standard EN 14683, Type II face masks must undergo the following quality tests: Bacterial filtration efficiency (BFE) - The ability of the face mask to filter the bacterium Staphylococcus aureus. The BFE is expressed as the percentage of colony-forming units (cfu) that have passed via aerosol through the facemask. If a face mask consists of two or more areas with different characteristics, these areas will be tested separately., Breathability (Differential pressure) - The amount of differential pressure required to draw air through a measured surface area at a constant flow rate., Microbial cleanliness (Bioburden) - The measurement of colony forming units per gram as per EN ISO 11737-1., Biocompatibility - The medical face mask manufacturer shall complete a biocompatibility evaluation according to ISO 10993-1 as a surface device with limited contact. The applicable toxicology testing regimen shall also be determined.. In addition to the above, Type IIR masks require the following test: Splash resistance - Performed according to ISO 22609, this test determines the ability of a face mask to resist penetration of splashes of liquid at different pressures.. The lower displayed price applies to the Type II mask test package, while the higher price also includes the splash resistance test required for Type IIR masks.

The bacterial reverse mutation (AMES) test is used to evaluate the genotoxic effect of a medical device or its extract when in contact with a bacterial suspension. The test is conducted according to OECD 471 and ISO 10993-3 by exposing a bacterial suspension of Salmonella spp and Escherichia coli to 5 concentrations of the medical device or its pure extracts. The AMES test is a preliminary "screening test" for genotoxicity. A full genotoxicity evaluation usually includes testing the device with two in vitro methods, of which AMES is typically performed first. An additional in vivo method can be used if needed. Measurlabs can support you with the full genotoxicity evaluation. Please contact our experts for a quote.

Pyrogenicity assessment by ISO 10993-11 to evaluate the material-mediated pyrogenic (i.e., fever-inducing) potential of medical devices. Material-mediated pyrogenicity tests focus on non-endotoxin-related substances, including bacterial exotoxins, endogenous pyrogens, prostaglandin, neurotransmitters, and metal salts. These can be studied using in vitro assays, where the fever-inducing potential is evaluated using cells, or in vivo rabbit pyrogen tests, where the animal's body temperature is monitored upon exposure to device extracts. Measurlabs provides testing using the following methods: Material-mediated pyrogenicity - In vivo (rabbit), Material-mediated pyrogenicity - In vitro (MAT, Monocyte Activation Test). Please ask for a quote for your medical device. We also offer Bacterial endotoxin tests (ISO 11737-3) to evaluate endotoxin-related pyrogenicity.

Sterility testing measures the growth of microorganisms on a product after the product has been sterilized. ISO 11737-2 is a harmonized standard for evaluating the sterility of medical devices by the EU Medical Device Regulation, as well as an FDA-recognized consensus standard for supporting 510(k) submissions. A sterile device or product is free from viable microorganisms. The purpose of sterilization is to inactivate microbiological contaminants to transform devices from a non-sterilized to a sterilized state. Sterility can be assessed when defining, validating, or maintaining a sterilization process. Testing according to ISO 11737-2 includes method validation by determining the initial bacterial count of control suspensions and testing the suitability of the culture media for aerobic and anaerobic bacteria and fungi. Also, the suitability of the test for the specific product is assessed. This example testing package includes the following: Testing of 3 identical specimens, Detecting the presence of aerobic and anaerobic microbes and fungi (yeast and molds), Validation of the sterility determination technique, The results are given as negative (no growth observed) or positive (growth observed). The price includes one result per micro-organism per product.. We can also offer a custom sterility test package for your needs, especially for large sample volumes. Please ask our experts for a quotation and estimated turnaround time

Medical devices sterilized with ethylene oxide are tested according to ISO 10993-7 to ensure that residual chemical concentrations are not high enough to make normal product use unsafe. Testing is required for the regulatory approval of applicable devices in the EU (under the MDR) and the US (510(k) submission to the FDA). Ethylene oxide can be used when steam sterilization is not appropriate for the device. ISO 10993-7 sets maximum daily doses for ethylene oxide (EO) and ethylene chlorohydrin (ECH) in mg/d, based on the device's exposure duration category (limited, prolonged, or permanent). Residual amounts shall not exceed these maximums. During the assessment, the product is extracted with water, and the amount of EO and ECH is determined chromatographically. Extractions are made until the cumulative exposure does not increase. The displayed example price covers both ethylene oxide sterilization and analysis of sterilization residues (EO and ECH). Price includes a 6-hour sterilization cycle for one euro pallet (80x120x190cm) with 3 extractions. Please ask for a quote for your medical device.

A biological evaluation plan (BEP) is a critical part of assessing the safety of a medical device. It involves a detailed examination of various aspects such as the device's design & structure, its material composition, manufacturing process & potential contaminants, the intended use, existing test results, and clinical history. The BEP ensures that the device undergoes sufficient biocompatibility testing, with parameters selected from the ISO 10993-1 standard. As a manufacturer, you will need to have a BEP during the regulatory approval process to demonstrate the safety of your medical device. The BEP should be developed during the initial design phase of the medical device. At this stage, manufacturers can identify potential biological risks associated with the device's intended use, materials, and components. A new BEP or updates to the existing one may also be needed if changes are made to the device's design or material composition at a later point. At Measurlabs, we can provide a BEP for a range of medical devices while also guiding manufacturers throughout the process. Do not hesitate to contact us if you are developing a new device, seeking regulatory approval, making changes to an existing product, conducting post-market surveillance, or performing preclinical testing.  We are also happy to create an offer for biocompatibility testing according to the BEP, as well as a biological evaluation report (BER) to summarize the results of the biological evaluation.

Hemocompatibility testing is performed to evaluate the interaction between a medical device or material and blood. The goal is to ensure that the device does not cause adverse effects, such as clot formation, red blood cell damage (hemolysis), platelet activation, or immune responses. Regulatory bodies in the EU and the US (under MDR and FDA rules, respectively) require a hemocompatibility evaluation for all medical devices that come into direct or indirect contact with blood.  Measurlabs offers a comprehensive range of hemocompatibility tests using methods outlined in the ISO 10993-4 standard: Hemolysis testing with direct and indirect methods to evaluate the device’s potential to cause damage to red blood cells, leading to hemolysis and hemoglobin release. Hemolysis testing is mandatory for all blood-contacting devices, regardless of whether contact is direct or indirect., Complement activation testing to measure the material’s tendency to activate the complement system, which is a key part of the immune response., Thrombogenicity testing to assess the material’s potential to promote thrombus (clot) formation. Available methods include the platelet and leukocyte count and partial thromboplastin time (PTT) tests., Coagulation tests to determine whether the device or material interferes with the blood clotting process., Platelet activation testing to evaluate the materials’ propensity to induce platelet activation, which is an early step in clot formation., Hematology tests to assess the device’s impact on the number and proportion of blood components, including red and white blood cells, platelets, and leukocytes.. The example price includes hemolysis testing using either the direct or indirect (extract-based) method, performed under GLP (Good Laboratory Practice) principles. The extent of required testing depends on the device's classification, type of blood contact (direct or indirect), target market, and overall risk assessment. Please contact us for a detailed quotation tailored to your device or material.

Sensitization assessment according to ISO 10993-10 is a crucial part of biocompatibility testing and one of the most common tests required to ensure the safety and compliance of medical devices. The goal is to show that the device does not cause skin sensitization, such as allergic responses or immunological reactions, when in contact with the body. A sensitization assessment is required for new medical devices to be approved in the EU (under the MDR) and the USA (510(k) submission to the FDA). Sensitization tests can be performed on the material or device itself, or an extract, depending on the device and test method type. ISO 10993-10 lists several in vitro and in vivo assays to assess the sensitization potential of medical devices and chemicals extracted from them. In vitro assays evaluate skin sensitization potential by detecting chemical reactions or cell responses to the chemicals. Conversely, in vivo assays expose animals to the test sample or extract, which is typically applied in induction and challenge phases. Sensitization potential is then evaluated by observing possible reactions to the exposure. The sensitization reaction to the medical device is scored based on the evaluation criteria defined in ISO 10993-10. We can provide sensitization tests using several methods. A few examples are outlined below. In vivo methods: Guinea pig maximization test (GPMT), Closed-patch test (Buehler), Murine local lymph node assay (LLNA). In vitro methods: ARE-Nrf2 Luciferase test, Direct peptide reactivity assay (DPRA). The displayed example price covers testing with the commonly used GPMT method for liquid medical devices, performed under GLP. Please ask for a quote for your medical device.