Yellowness of paper or board

The method measures the diffuse blue light reflectance factor of paper and board by the ISO 2470-1 standard. The test is limited to white and near-white samples. The measurement is used to determine the whiteness level of paper and cardboard.

This test is used to evaluate the color fastness of dyed or printed paper or board that is intended to come into contact with food. The applied simulants are Olive oil, 3% acetic acid, Alkaline salt solution (saliva simulant), Distilled water. Color transfer is assessed against a greyscale according to standard EN 646.

This test is used to determine the folding endurance of paper or board using the Köhler-Molin, Lhomargy, MIT, and Schopper testers. During the test, a narrow strip of paper is folded forwards and backward in a standardized manner, so that it is subjected to longitudinal stress until it breaks.

Bending stiffness testing is performed to evaluate cardboard's stiffness by measuring the resistance to bending with 4-point loading. The results express the bending stiffness of the material in the machine direction and the cross direction.

Determination of certain aromatic amines derived from azo dyes in accordance with the standard EN 14362-1.

Glyoxal (CAS 107-22-2) can be used as a cross-linker in paper, board, corrugated board, and textile products. According to German BfR Recommendation XXXVI on paper and board food contact materials, the extract of the finished product must not contain more than 1.5 mg of glyoxal per dm2.

This test is designed to measure the oxygen transmission rate of finished packages, including cups, bottles, trays, and containers. Two replica measurements are included in the displayed price. Temperature can be adjusted from 15 to 55 °C, and relative humidity can be either 0% or between 5 and 90% RH. This test is not suitable for films. Please see the oxygen transmission rate (OTR) of films and sheeting if you need testing for film samples. Please specify the sample dimensions and testing conditions upon ordering.

Phthalates are a group of chemicals widely used as plasticizers, which make plastics more flexible and durable. They have also been used as additives in products such as cosmetics and personal care items. Several phthalates have been identified as endocrine-disrupting agents or as chemicals toxic to reproduction. Exposure to phthalates can occur through: Oral exposure Food: Exposure occurs via migration from food packaging., Children's toys: Children often put toys in their mouths.., Inhalation: Breathing in dust from vinyl flooring or fragrances (like perfumes) can cause exposure to phthalates via inhalation., Skin contact: Phthalates present in cosmetics, lotions, and soaps can be absorbed through the skin.. For other listed matrices apart from cosmetics, the analysis package covers the following substances included in the REACH Authorization List: Substance Abbreviation CAS number Diisobutyl phthalate DIBP 84-69-5 Dibutyl phthalate DBP 84-74-2 Benzyl butyl phthalate BBP 85-68-7 Bis(2-ethylhexyl) phthalate DEHP 117-81-7 Di(n-octyl) phthalate DNOP 117-84-0 Diisononyl phthalate DINP 68515-48-0 Diisodecyl phthalate DIDP 26761-40-0 Products that contain restricted phthalates in concentrations higher than 0.1% may be removed from the market. The analysis package for cosmetic products contains the following phthalates: Substance Abbreviation CAS number Bis(2-ethylhexyl) phthalate DEHP 117-81-7 Benzyl butyl phthalate BBP 85-68-7 Dibutyl phthalate DBP 84-74-2 Diisononyl phthalate DINP 68515-48-0 Di(n-octyl) phthalate DNOP 117-84-0 Diisodecyl phthalate DIDP 26761-40-0 All the above-mentioned substances are prohibited in cosmetic products (Annex II of Regulation (EC) No 1223/2009).

Analysis for quantifying dioxins and furans (PCDD/F) in various packaging materials (e.g. food and cosmetics packaging) and their raw materials, including plastics, paper, and rubber. Dioxins and furans are a family of chlorine-containing chemicals considered bioaccumulating, persistent organic pollutants (POPs) that can be toxic even at low doses. While regulatory limits apply mainly to food and feed, packaging materials can be a source of indirect exposure to dioxins and furans. Recycled materials tend to pose relatively high risks, depending on the quality of the raw material and the effectiveness of the decontamination process. The following substances are included in the analysis: Dibenzo-p-dioxins (PCDDs) Polychlorinated dibenzofurans (PCDFs) 2,3,7,8-TCDD. 2,3,7,8-TCDF. 1,2,3,7,8-PeCDD. 1,2,3,7,8-PeCDF. 1,2,3,4,7,8-HxCDD. 2,3,4,7,8-PeCDF. 1,2,3,6,7,8-HxCDD. 1,2,3,4,7,8-HxCDF. 1,2,3,7,8,9-HxCDD. 1,2,3,6,7,8-HxCDF. 1,2,3,4,6,7,8-HpCDD. 1,2,3,7,8,9-HxCDF. OCDD. 2,3,4,6,7,8-HxCDF. 1,2,3,4,6,7,8-HpCDF. 1,2,3,4,7,8,9-HpCDF. OCDF. Testing is often performed for the following reasons: Analyzing recycled PE, PP, and LDPE intended for cosmetics packaging according to CosPaTox guidelines., Analyzing paper and board bleached with elementary chlorine according to the requirements of TemaNord 2008:515 guidelines..

Laboratory analysis for determining the total number of colony-forming units of bacteria, bacterial spres count as well as yeast and molds in dry market pulp, paper, and paperboard after disintegration. NOTE: Please note that while preparing the samples for shipping, please use aluminum foil/ envelopes/ self-closing plastic bags to protect the samples. Samples can be wrapped as such in aluminum foil, in ready-to-use sterile envelopes, or in self-closing bags, which are commercially available.