Pin adhesion test (PAT) of corrugated cardboard

This test is used to determine the folding endurance of paper or board using the Köhler-Molin, Lhomargy, MIT, and Schopper testers. During the test, a narrow strip of paper is folded forwards and backward in a standardized manner, so that it is subjected to longitudinal stress until it breaks.

Bending stiffness testing is performed to evaluate cardboard's stiffness by measuring the resistance to bending with 4-point loading. The results express the bending stiffness of the material in the machine direction and the cross direction.

Horizontal impact testing by the ISO 2244 standard is used to determine the effect of a vertical impact on the horizontal edge of finished and filled cardboard containers. In the test, the packaging is placed on a carriage that is rolled against an impact apparatus. Testing can include a single test or a series of impact tests to evaluate the packaging's ability to perform in environments with a horizontal impact hazard.

This test is used to evaluate the compressive strength of paper and board with the ring crush method. Testing is particularly useful when determining the usability of shipping containers made from fiberboard.

The Scott bond test measures the energy required to rapidly delaminate a sheet-type specimen. A z-directional rupture is initiated by the impact of a pendulum having both a controlled mass and a controlled velocity. The geometry of the apparatus causes the tensile stress to be rotational with negligible shear stress on the specimen. The energy is absorbed during the elongation and stretching of the sample's fiber network before rupture. The test is a measurement of strain energy per unit sample area, which is proportional to the area under the stress-strain curve.

In this test, a pyramid-shaped puncture head is used to measure the puncture resistance of a board sample. During this process, combined tensile, compression, flexural, and shear forces occur. The result is given as the energy absorbed by the sample upon being punctured. If you need a puncture resistance test for another material, please contact us to request an offer.

This method is used to determine the flat crush resistance of a corrugating medium after being fluted to A-flute geometry with a laboratory fluting device. The Concora corrugating medium test can be used for any corrugating medium that is intended to be used on a corrugated board.

SCT (short-span compression test) is one of the most commonly used testing methods for determining the compression strength of paper or cardboard. In this test, the sample is conditioned in standard conditions (23 °C/50% RH), after which the compression strength is measured in the machine direction (MD) and the cross direction (CD).

This test is used to measure the tensile strength and elongation of paper or board in the machine direction (MD) and the cross direction (CD). Even small variations in tensile strength can affect the functionality of the product. Paper and board must withstand certain forces during manufacturing, transportation, shipping, and use.

This test, performed by the ISO 3038 standard, is used to evaluate the strength of a glue bond in corrugated cardboard after being immersed in water. The test is especially useful for assessing cardboard's suitability for applications where a high degree of resistance to wet conditions is required.