Propylene oxide content

Determination of certain aromatic amines derived from azo dyes in accordance with the standard EN 14362-1.

Analysis to determine the specific migration of fluorescent whitening agent 2,5-bis(5-tert-butyl-2-benzoxazolyl)thiophene, known by the trade name Uvitex OB [CAS: 7128-64-5], from a sample or material intended for food contact. The substance is listed under FCM 500 and Ref No. 38560 in European Commission Regulation No 2011/10 on plastic food contact materials. The specific migration limit (SML) for Uvitex OB is 0.6 mg/kg of food.

Analysis for quantifying dioxins and furans (PCDD/F) in various packaging materials (e.g. food and cosmetics packaging) and their raw materials, including plastics, paper, and rubber. Dioxins and furans are a family of chlorine-containing chemicals considered bioaccumulating, persistent organic pollutants (POPs) that can be toxic even at low doses. While regulatory limits apply mainly to food and feed, packaging materials can be a source of indirect exposure to dioxins and furans. Recycled materials tend to pose relatively high risks, depending on the quality of the raw material and the effectiveness of the decontamination process. The following substances are included in the analysis: Dibenzo-p-dioxins (PCDDs) Polychlorinated dibenzofurans (PCDFs) 2,3,7,8-TCDD. 2,3,7,8-TCDF. 1,2,3,7,8-PeCDD. 1,2,3,7,8-PeCDF. 1,2,3,4,7,8-HxCDD. 2,3,4,7,8-PeCDF. 1,2,3,6,7,8-HxCDD. 1,2,3,4,7,8-HxCDF. 1,2,3,7,8,9-HxCDD. 1,2,3,6,7,8-HxCDF. 1,2,3,4,6,7,8-HpCDD. 1,2,3,7,8,9-HxCDF. OCDD. 2,3,4,6,7,8-HxCDF. 1,2,3,4,6,7,8-HpCDF. 1,2,3,4,7,8,9-HpCDF. OCDF. Testing is often performed for the following reasons: Analyzing recycled PE, PP, and LDPE intended for cosmetics packaging according to CosPaTox guidelines., Analyzing paper and board bleached with elementary chlorine according to the requirements of TemaNord 2008:515 guidelines..

N-nitrosamines and N-nitrosatable substances are present, usually in trace quantities, in various environmental media, certain food products, cosmetics, and rubber products. In particular, those found in rubber products are thought to originate from certain additives used in the vulcanization of rubber. Regulatory reference / standard Applicable materials Compliance limits Applicable reference method Commission Directive 93/11/EEC Elastomer or rubber teats and soothers N-nitrosamines released: 0.01 mg/kg N-nitrosatable substances released: 0.1 mg/kg EN 12868 EN 14350 Drinking accessories made of rubber and other elastomers BfR recommendation XXI/1 Commodities based on natural and synthetic rubber in contact with food N-nitrosamines: not detected above 1 µg/dm2 (sum of substances) - N-nitrosamines and N-nitrosatable substances are controlled by Commission Directive 93/11/EEC. In addition, recommendation XXI by Germany’s Federal Institute for Risk Assessment (BfR) has set the migration limit of N-nitrosamines from elastomers to food at ≤ 1.0 µg/dm². The test package covers analysis of the release of the following N-nitrosamines (free and after nitrosation) into artificial saliva simulant or a food simulant: Substance Abbreviation CAS No N-Nitrosodimethylamine NDMA 62-75-9 N-Nitrosodi-n-propylamine NDPA 621-64-7 N-Nitrosodi-n-butylamine NDBA 924-16-3 N-Nitrosopiperidine NPIP 100-75-4 N-Nitrosopyrrolidine NPYR 930-55-2 N-Nitrosomorpholine NMOR 59-89-2 N-Nitrosobenzylamine NDBzA 937-32-6 N-Nitrosodi-n-amylamine NDiNA 2050-92-2 N-Nitroso-methylphenylamine NMPhA 937-35-9 N-Nitrosoethylphenylamine NEPhA 612-64-6

Determination of vinyl chloride [CAS: 75-01-4] content in plastics. Both the European Chemicals Agency (ECHA) and the US Environmental Protection Agency (EPA) have identified vinyl chloride as a carcinogen. According to Regulation (EU) No 10/2011 on plastic food contact materials, vinyl chloride content in the final product must not exceed 1 mg/kg. In addition, the substance has a specific migration limit of ND, which means that there must be no detectable migration into food.

Accredited laboratory analysis for determining the amount of volatile organic matter in silicone used in food contact materials or childcare articles. Testing can be conducted according to the following methods and references: Applicable materials Drying phase Treatment phase Compliance limit Test method Reference General food contact materials made from silicone elastomer 1 h / 100 °C 4 h / 200 °C ≤ 0.5 % Bestimmung von flüchtigen Verbindungen in Bedarfsgegenständen aus Silikon (version 02, 09/2023) BfR XV. Silicones (as of 01.08.2024) Childcare articles intended for drinking 1 h / 100 °C 4 h / 200 °C ≤ 0.5 % EN 14350, art 8.4.2 EN 14350 Childcare articles intended for feeding 1 h / 100 °C 4 h / 200 °C ≤ 0.5 % EN 14372, art. 6.3.3 EN 14372

Determination of the total organic fluorine (TOF) content in combustible materials by combustion ion chromatography (CIC). TOF analysis gives information about the total amount of organic fluorinated compounds. It can also be used to evaluate the presence of per- and polyfluoroalkyl substances (PFAS) in the material, even though individual PFAS compounds can't be analyzed with this method. The analysis is suitable for many different materials. Please describe the sample in detail when requesting an offer to help us prepare a quote quickly.

Screening of volatile organic compounds (VOC) from paper, board, and plastics. The method can be used to analyze volatile residues from printed packaging. For evaluation of recycling process efficiency, please see our extended package for VOC screening. The following substances are included in this analysis package: Substance CAS No Methyl propylene glycol (1-methoxy-2-propanol) 107-98-2 Buthyl glycol (2-Butoxy ethanol) 111-76-2 Ethyl glycol (2-Ethoxyethanol) 110-80-5 Ethyl glycol acetate (2-Ethoxyethyl acetate) 111-15-9 Methyl glycol (2-Methoxyethanol) 109-86-4 Methyl glycol acetate (2-Methoxyethanol acetate) 110-49-6 3-Ethoxy-1-propanol 111-35-3 Acetyl acetone 123-54-6 Acetone 67-64-1 Ethanol 64-17-5 Isobutanol 201-148-0 2-propanol, Isopropanol (IPA) 67-63-0 Methanol 67-56-1 1-Butanol 71-36-3 1-Propanol 71-23-8 Benzene 71-43-2 Cyclohexane 110-82-7 Ethylbenzene 100-41-4 Ethyl acetate 141-78-6 Isobutyl acetate 110-19-0 Isopropyl acetate 108-21-4 Isooctane 540-84-1 2-butanone, methyl ethyl ketone (MEK) 78-93-3 Methyl isobutyl ketone (MIBK) 108-10-1 Methyl acetate 79-20-9 Toluene 108-88-3 Trichloroethylene 79-01-6 Xylene 1330-20-7 n-Butyl Acetate 123-86-4 n-Heptane 142-82-5 n-Hexane 110-54-3 n-Octane 111-65-9 n-Propyl acetate 109-60-4

Specific migration of 2,2-bis(4-hydroxyphenyl)propane, commonly known as bisphenol A or BPA, from a plastic sample or material intended for food contact. Bisphenol A [CAS: 80-05-7] was previously listed under FCM No. 151 and Ref No. 13480/13607 in European Commission Regulation No 10/2011 with a specific migration limit (SML) value of 0.05 mg/kg of food. Using BPA in food contact materials was recently banned by Commission Regulation (EU) 2024/3190, but materials compliant with the previous SML value can still be placed on the market until 20 July 2026 or 20 January 2028, depending on the material. The starting price for this measurement covers testing in line with the previous SML value. The analysis can also be performed with a low detection limit method (1 μg/kg), as specified in the new regulation. Please contact us for a quote.

Specific migration of dialkyl ketones (DAKs) that originate from alkyl ketene dimer (AKD) hydrophobic sizing agent of paper and board. According to BfR XXXVI recommendation, the limitation for the migration of AKD DAKs is 5 mg/kg of food or food simulant.