Bisphenol A, B, F, S, and AF content

Cyclosiloxanes are the primary building blocks of siloxane polymers and, ultimately, silicone rubber. Hence, cyclosiloxanes can remain in the final silicone article as residual impurities. Several cyclosiloxanes (D4, D5, D6; see table below) are considered harmful to the environment and human health. These three substances are listed in the REACH Candidate List of substances of very high concern (SVHC). Substance Abbreviation CAS N:o Octamethylcyclotetrasiloxane D4 556-67-2 Decamethylcyclopentasiloxane D5 541-02-6 Dodecamethylcyclohexasiloxane D6 540-97-6 The Nordic Swan Ecolabel criteria for greaseproof paper sets the limit values for D4, D5, and D6 impurities in silicone coating as 400 ppm per substance and 1000 ppm for the sum of D4, D5, and D6. In addition to the restricted substances listed above, this analysis package includes the quantification of cyclosiloxanes D3, D7, and D8.

Analysis of PAH compounds in plastic, rubber, paper, board, and products made from these raw materials (e.g., textiles, toys, packaging materials) as required by the REACH Regulation. Test package includes the following substances: Benzo(a)pyrene [benzo(def)chrysene] [CAS: 50-32-8] , Benzo(e)pyrene [CAS: 192-97-2] , Benzo(a)anthracene [CAS: 56-55-3] , Chrysene [CAS: 218-01-9] , Benzo(b)fluoranthene [CAS: 205-99-2] , Benzo(j)fluoranthene [CAS: 205-82-3] , Benzo(k)fluoranthene [CAS: 207-08-9], Dibenzo(a,h)anthracene [CAS: 53-70-3].

Determination of certain aromatic amines derived from azo dyes in accordance with the standard EN 14362-1.

Phthalates are a group of chemicals widely used as plasticizers, which make plastics more flexible and durable. They have also been used as additives in products such as cosmetics and personal care items. Several phthalates have been identified as endocrine-disrupting agents or as chemicals toxic to reproduction. Exposure to phthalates can occur through: Oral exposure Food: Exposure occurs via migration from food packaging., Children's toys: Children often put toys in their mouths.., Inhalation: Breathing in dust from vinyl flooring or fragrances (like perfumes) can cause exposure to phthalates via inhalation., Skin contact: Phthalates present in cosmetics, lotions, and soaps can be absorbed through the skin.. For other listed matrices apart from cosmetics, the analysis package covers the following substances included in the REACH Authorization List: Substance Abbreviation CAS number Diisobutyl phthalate DIBP 84-69-5 Dibutyl phthalate DBP 84-74-2 Benzyl butyl phthalate BBP 85-68-7 Bis(2-ethylhexyl) phthalate DEHP 117-81-7 Di(n-octyl) phthalate DNOP 117-84-0 Diisononyl phthalate DINP 68515-48-0 Diisodecyl phthalate DIDP 26761-40-0 Products that contain restricted phthalates in concentrations higher than 0.1% may be removed from the market. The analysis package for cosmetic products contains the following phthalates: Substance Abbreviation CAS number Bis(2-ethylhexyl) phthalate DEHP 117-81-7 Benzyl butyl phthalate BBP 85-68-7 Dibutyl phthalate DBP 84-74-2 Diisononyl phthalate DINP 68515-48-0 Di(n-octyl) phthalate DNOP 117-84-0 Diisodecyl phthalate DIDP 26761-40-0 All the above-mentioned substances are prohibited in cosmetic products (Annex II of Regulation (EC) No 1223/2009).

Analysis for quantifying dioxins and furans (PCDD/F) in various packaging materials (e.g. food and cosmetics packaging) and their raw materials, including plastics, paper, and rubber. Dioxins and furans are a family of chlorine-containing chemicals considered bioaccumulating, persistent organic pollutants (POPs) that can be toxic even at low doses. While regulatory limits apply mainly to food and feed, packaging materials can be a source of indirect exposure to dioxins and furans. Recycled materials tend to pose relatively high risks, depending on the quality of the raw material and the effectiveness of the decontamination process. The following substances are included in the analysis: Dibenzo-p-dioxins (PCDDs) Polychlorinated dibenzofurans (PCDFs) 2,3,7,8-TCDD. 2,3,7,8-TCDF. 1,2,3,7,8-PeCDD. 1,2,3,7,8-PeCDF. 1,2,3,4,7,8-HxCDD. 2,3,4,7,8-PeCDF. 1,2,3,6,7,8-HxCDD. 1,2,3,4,7,8-HxCDF. 1,2,3,7,8,9-HxCDD. 1,2,3,6,7,8-HxCDF. 1,2,3,4,6,7,8-HpCDD. 1,2,3,7,8,9-HxCDF. OCDD. 2,3,4,6,7,8-HxCDF. 1,2,3,4,6,7,8-HpCDF. 1,2,3,4,7,8,9-HpCDF. OCDF. Testing is often performed for the following reasons: Analyzing recycled PE, PP, and LDPE intended for cosmetics packaging according to CosPaTox guidelines., Analyzing paper and board bleached with elementary chlorine according to the requirements of TemaNord 2008:515 guidelines..

N-nitrosamines and N-nitrosatable substances are present, usually in trace quantities, in various environmental media, certain food products, cosmetics, and rubber products. In particular, those found in rubber products are thought to originate from certain additives used in the vulcanization of rubber. Regulatory reference / standard Applicable materials Compliance limits Applicable reference method Commission Directive 93/11/EEC Elastomer or rubber teats and soothers N-nitrosamines released: 0.01 mg/kg N-nitrosatable substances released: 0.1 mg/kg EN 12868 EN 14350 Drinking accessories made of rubber and other elastomers BfR recommendation XXI/1 Commodities based on natural and synthetic rubber in contact with food N-nitrosamines: not detected above 1 µg/dm2 (sum of substances) - N-nitrosamines and N-nitrosatable substances are controlled by Commission Directive 93/11/EEC. In addition, recommendation XXI by Germany’s Federal Institute for Risk Assessment (BfR) has set the migration limit of N-nitrosamines from elastomers to food at ≤ 1.0 µg/dm². The test package covers analysis of the release of the following N-nitrosamines (free and after nitrosation) into artificial saliva simulant or a food simulant: Substance Abbreviation CAS No N-Nitrosodimethylamine NDMA 62-75-9 N-Nitrosodi-n-propylamine NDPA 621-64-7 N-Nitrosodi-n-butylamine NDBA 924-16-3 N-Nitrosopiperidine NPIP 100-75-4 N-Nitrosopyrrolidine NPYR 930-55-2 N-Nitrosomorpholine NMOR 59-89-2 N-Nitrosobenzylamine NDBzA 937-32-6 N-Nitrosodi-n-amylamine NDiNA 2050-92-2 N-Nitroso-methylphenylamine NMPhA 937-35-9 N-Nitrosoethylphenylamine NEPhA 612-64-6

Accredited laboratory analysis for determining the amount of volatile organic matter in silicone used in food contact materials or childcare articles. Testing can be conducted according to the following methods and references: Applicable materials Drying phase Treatment phase Compliance limit Test method Reference General food contact materials made from silicone elastomer 1 h / 100 °C 4 h / 200 °C ≤ 0.5 % Bestimmung von flüchtigen Verbindungen in Bedarfsgegenständen aus Silikon (version 02, 09/2023) BfR XV. Silicones (as of 01.08.2024) Childcare articles intended for drinking 1 h / 100 °C 4 h / 200 °C ≤ 0.5 % EN 14350, art 8.4.2 EN 14350 Childcare articles intended for feeding 1 h / 100 °C 4 h / 200 °C ≤ 0.5 % EN 14372, art. 6.3.3 EN 14372

Determination of the total organic fluorine (TOF) content in combustible materials by combustion ion chromatography (CIC). TOF analysis gives information about the total amount of organic fluorinated compounds. It can also be used to evaluate the presence of per- and polyfluoroalkyl substances (PFAS) in the material, even though individual PFAS compounds can't be analyzed with this method. The analysis is suitable for many different materials. Please describe the sample in detail when requesting an offer to help us prepare a quote quickly.

Screening of volatile organic compounds (VOC) from paper, board, and plastics. The method can be used to analyze volatile residues from printed packaging. For evaluation of recycling process efficiency, please see our extended package for VOC screening. The following substances are included in this analysis package: Substance CAS No Methyl propylene glycol (1-methoxy-2-propanol) 107-98-2 Buthyl glycol (2-Butoxy ethanol) 111-76-2 Ethyl glycol (2-Ethoxyethanol) 110-80-5 Ethyl glycol acetate (2-Ethoxyethyl acetate) 111-15-9 Methyl glycol (2-Methoxyethanol) 109-86-4 Methyl glycol acetate (2-Methoxyethanol acetate) 110-49-6 3-Ethoxy-1-propanol 111-35-3 Acetyl acetone 123-54-6 Acetone 67-64-1 Ethanol 64-17-5 Isobutanol 201-148-0 2-propanol, Isopropanol (IPA) 67-63-0 Methanol 67-56-1 1-Butanol 71-36-3 1-Propanol 71-23-8 Benzene 71-43-2 Cyclohexane 110-82-7 Ethylbenzene 100-41-4 Ethyl acetate 141-78-6 Isobutyl acetate 110-19-0 Isopropyl acetate 108-21-4 Isooctane 540-84-1 2-butanone, methyl ethyl ketone (MEK) 78-93-3 Methyl isobutyl ketone (MIBK) 108-10-1 Methyl acetate 79-20-9 Toluene 108-88-3 Trichloroethylene 79-01-6 Xylene 1330-20-7 n-Butyl Acetate 123-86-4 n-Heptane 142-82-5 n-Hexane 110-54-3 n-Octane 111-65-9 n-Propyl acetate 109-60-4

Specific migration of dialkyl ketones (DAKs) that originate from alkyl ketene dimer (AKD) hydrophobic sizing agent of paper and board. According to BfR XXXVI recommendation, the limitation for the migration of AKD DAKs is 5 mg/kg of food or food simulant.