Pyrolysis oil testing for quality assurance and end-of-waste status determination

published 

The use of pyrolysis oil as a fuel or feedstock in chemical and polymer manufacturing is still fairly limited, but the market is expected to grow with the development of EU circular economy policies. Chemical plastic recycling presents particularly interesting opportunities for developers of pyrolysis technologies, as the recycled content quotas introduced by the Packaging and Packaging Waste Regulation (PPWR) are unlikely to be met through mechanical recycling alone, especially for food-grade plastic packaging other than PET beverage bottles.1

Its variable composition and properties can make pyrolysis oil difficult to integrate into existing manufacturing or energy production processes. Treatment steps, such as hydrotreatment or dilution with crude oil, are therefore often necessary before downstream processing.2 Monitoring the properties of the oil with standardized methods before and after these steps is key to confirming its suitability for the intended process.

Standardized analytical methods for pyrolysis oil characterization

Standardized analysis techniques provide an objective basis for establishing the bulk chemical composition, impurities, physical properties, and stability of pyrolysis oil. Selected methods are summarized in Table 1. The American ASTM methods are listed in the 2025 ASTM D8577 Standard Guide for Waste Plastic Process Oil Analyses,3 while the EN, DIN, and ISO methods are commonly applied European or international alternatives.

Table 1: Selected standardized analytical methods for pyrolysis oil

Analysis

Standard(s)

Notes

Hydrocarbon composition by GC-VUV

ASTM D8519

Max. boiling point 545 °C, confirmed by simulated distillation before analysis.

Boiling point distribution of petroleum fractions by simulated distillation

ASTM D7169

Suitable for determining boiling point mass percent yields up to 720 °C.

Density by oscillating U-tube method

ASTM D4052

EN ISO 12185

Can be performed at different temperatures (e.g., 15, 20, or 25 °C)

Total acid number (TAN) by potentiometric titration

ASTM D664

EN 12634

ISO 660

Samples must be soluble in a toluene/isopropyl alcohol solvent mixture

Diene value by maleic anhydride addition reaction and back-titration

UOP 326

Concentration of reactive diene compounds reported in g/100 g

Ash content by combustion and gravimetric measurement

ASTM D482

EN ISO 6245

Applicable to ash contents of 0.001–0.180% (m/m)

Flash point by closed cup method

ASTM D93

EN ISO 3679

Application range ~40 to 300 °C for ASTM and ~-25 to 130 °C for the EN ISO method

Pour point

ASTM D97

EN ISO 3016

Method range: -90 to 50 °C

Viscosity by Stabinger viscometer or capillary viscometer

ASTM D7042

EN ISO 3104

Measurement temperature can be selected between 20 and 80 °C

Sulfur content

ASTM D5453

ASTM D2622

Detection limit 0.5 to 3 ppm, depending on the method

Nitrogen content

ASTM D5762

Detection limit 0.5 ppm

Oxygen content

ASTM D5622

Detection limit 0.5%

Total sediment by hot filtration

ASTM D4870

ISO 10307-1

Different filtering temperatures available, depending on the method (e.g., 100, 150, and 200 °C)

Water content by Karl Fischer titration

ASTM D6304

EN ISO 12937

Best suited for samples with final boiling point below 390 °C

Halogen content (Cl, F, Br)

EN 15408

DIN 51727

Typical detection limit 10 mg/kg per halogen

Metal content by ICP-OES

EN ISO 11885

Determination of Al, Ag, As, B, Ba, Be, Bi, Ca, Cd, Co, Cr, Cu, Fe, K, Li, Mg, Mn, Mo, Na, Ni, Pb, Sb, Se, Sr, Ti, Tl, V, Zn, S, Si, and P

Mercury impurities by cold vapor atomic absorption

ASTM D7623

Detection limit ~20 to 400 µg/kg, depending on sample properties

Most methods listed in Table 1 were originally developed for petroleum products, which means that samples should typically be particle-free, homogeneous, or easily filterable. Pretreatment steps such as filtering or digestion may be necessary before these methods can be applied to pyrolysis oil samples. Any prior knowledge of the sample's approximate properties also helps determine the suitability of the methods for the specific sample.

Demonstrating end-of-waste status

The feedstock used in pyrolysis oil production is often classified as waste, which means that the producer must show that the oil itself is no longer waste before it can be freely traded as a product. As there are currently no harmonized EU-wide criteria for end-of-waste (EoW) status, national criteria can be used where available.

Where national criteria do not exist for the type of pyrolysis oil in question, the decision on EoW status is made case-by-case by national authorities, based on the general conditions outlined in the Waste Framework Directive:4

  • The pyrolysis oil must be intended for a specific purpose (e.g., chemical feedstock, fuel)

  • There must be a market demand for it

  • It must comply with applicable legislation and technical specifications

  • The use must not lead to overall negative impacts on the environment or human health

French EoW criteria for waste plastic and tire pyrolysis oil

France was the first EU member state to establish national EoW criteria for pyrolysis oil, first for waste plastic pyrolysis oil (WPPO) in 2024, then for tire pyrolysis oil (TPO) in 2026.5 While the criteria are not binding in other EU countries, they can be used as a reference when evaluating WPPO and TPO quality.

Table 2: Summary of French EoW criteria for pyrolysis oil

Requirement type

Criteria for WPPO

Criteria for TPO

Permissible input materials

Plastic waste from several waste streams*, consisting of at least 85% PE, PP, and PS on a dry matter basis, with < 5% PU, < 10% ABS, < 5% PET, and ≤ 3% PVC content

Waste tires (waste code 16 01 03), shredded to < 250 mm

Excluded input materials

Rubber, metal, electronic waste, hazardous waste, most medical waste, and waste containing asbestos, PCBs, brominated flame retardants, or POPs in excess of regulatory limits

Electronic waste, hazardous waste, medical waste, and waste containing asbestos, PCBs, brominated flame retardants, or POPs in excess of regulatory limits

Treatment process

Pyrolysis in an installation with an environmental permit

Thermolysis in an installation authorized for the thermal treatment of non-hazardous waste

Intended use

Material recovery in a steam cracker at a petrochemical installation; NOT energy recovery

Material recovery in a petrochemical or chemical installation; NOT energy recovery

Max. sulfur, nitrogen, and oxygen content

3,000 or 5,000 ppm for S**

5,000 or 10,000 ppm for N**

10,000 or 40,000 ppm for O**

30,000 ppm for S

10,000 ppm for N

20,000 ppm for O

Max. halogen content (Br, Cl, F, I)

500 or 30,000 ppm for the sum**

10 or 100 ppm for F**

5 or 100 ppm for Br**

1,000 ppm for the sum

Max. sum of selected metals

500 or 5,000 ppm** for the sum of Al, Cr, Co, Cu, Mn, Ni, V, Fe, Zn, Ca, Mg, K, Cd, and Ti

500 ppm for the sum of Al, Cr, Co, Cu, Mn, Ni, V, Fe, Zn, Mg, Cd, and Ti

Max. sum of heavy metals (As, Hg, Pb, Sb)

10 or 100 ppm**

10 ppm

* Waste codes 02 01 04, 07 02 13, 12 01 05, 15 01 02, 15 01 05, 15 01 06, 16 01 19, 17 02 03, 17 09 04, 18 01 04, 18 02 03, 19 12 04, and 20 01 39.

** The higher limits apply to WPPO that will undergo a purification step at the petrochemical installation. Dilution with other materials is not considered purification.

Pyrolysis oil must also be of such quality that it can be used to replace the conventional raw material without compromising the production process or the quality of the product it is used to produce. This may mean that the quality criteria for a specific process are more stringent than the general criteria outlined above, for example in terms of sulfur or oxygen content.

Our pyrolysis oil analysis services

Measurlabs offers a comprehensive range of tests for determining the properties of pyrolysis oil samples. Example services include:

  • Standardized quality assurance for raw and upgraded oils, using petroleum industry standard methods adapted to pyrolysis oil

  • Testing against EoW criteria, including the sulfur, nitrogen, oxygen, halogen, and metal determinations required under the French criteria for WPPO and TPO

We also offer testing for other circular economy materials, such as biochar, recovered carbon black, and recycled plastics.

Use the form below to contact our experts for more information or a quote for the required analyses. Please describe the sample in as much detail as possible (e.g., feedstock, pyrolysis temperature, any prior knowledge about composition or physicochemical properties) to help us evaluate the suitability of the analyses for the specific sample matrix.

References:

1 Recyclate quality achievable through chemical vs. mechanical recycling is discussed in Section 2.1. "Focus on chemical recycling" of Joint Research Centre (JRC) report, Economic viability of chemical recycling: Current and future perspectives (2026)

2 Section 2.3. "Chemical recycling technologies" of the JRC report on economic viability of chemical recycling

3 ASTM D8577-25: Standard Guide for Waste Plastic Process Oil Analyses

4 Article 6(1) of Directive 2008/98/EC on waste

5 French Arrêté NOR: TREP2403460A of 19 February 2024 setting end-of-waste criteria for waste plastic pyrolysis oil & French Arrêté NOR: TECP2528362A of 21 July 2026, setting end-of-waste criteria for tire pyrolysis oil (both in French)

One partner for all your pyrolysis oil analysis needs

Measurlabs offers a broad range of standard methods for determining the composition and properties of pyrolysis oil samples.

Ask for an offer

Fill in the form, and we'll reply in one business day.

Have questions or need help? Email us at or call our sales team.